Shannon Burnett; Charlie Slykhuis: 95 MSHA citations controller
MSHA controller ID: 0114863
Watch this controller
Email me when a new MSHA incident is filed at any mine Shannon Burnett; Charlie Slykhuis controls.
- Fatalities
- 0
- Total incidents
- 0
- Mines on record
- 0
- Years on record
- —
Compliance record
MSHA citations since 2014
95
citations
25
significant & substantial
$14,762
proposed penalties
$9,172
paid to date
62% of proposed penalties paid to date, a $5,590 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2014
25
inspections on record
957
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 957 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$15K
proposed penalties
$15K
current assessed
$9K
paid to date
$6K
outstanding
88 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2019-12-17.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.28.4%
significant & substantial
15.9%
high negligence or reckless
28.4%
reasonably likely or greater
23.9%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 6.8% low, 77.3% moderate, 15.9% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2019-02-04, 7 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.100%
within 1.5 mg/m3
69
samples
0.79
dust max (mg/m3)
0
over MSHA ECV
ⓘ
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.49 samples taken by MSHA inspectors, 20 by the operator.
Most-sampled occupations
- BULLDOZER OPERATOR19
- HIGHWALL DRILL OPERATOR14
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE12
Silica (quartz)
Last sampled: 2018-03-19, 8 years ago22.8
silica avg (%)
5
samples
37.2
silica max (%)
Most-sampled occupations
- BULLDOZER OPERATOR4
- HIGHWALL DRILL OPERATOR1
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2018-05-22, 8 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.0%
over PEL
27
samples
Most-sampled occupations
- BULLDOZER OPERATOR6
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE6
- HIGHLIFT OPERATOR/FRONT END LOADER4
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
No reportable incidents on file.
MSHA has no recorded reportable accidents associated with this controller.
For insurers, brokers, and safety consultants
Where Shannon Burnett; Charlie Slykhuis stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.