Stephen F Carey: 7 MSHA citations controller
MSHA controller ID: 0137581
Watch this controller
Email me when a new MSHA incident is filed at any mine Stephen F Carey controls.
- Fatalities
- 0
- Total incidents
- 1
- Mines on record
- 1
- Years on record
- 2017
Compliance record
MSHA citations since 2017
7
citations
0
significant & substantial
$883
proposed penalties
$883
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2017
11
inspections on record
212
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 212 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$883
proposed penalties
$883
current assessed
$883
paid to date
$0
outstanding
7 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2018-05-02.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.0.0%
significant & substantial
14.3%
high negligence or reckless
0.0%
reasonably likely or greater
28.6%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 14.3% low, 71.4% moderate, 14.3% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2018-05-14, 8 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.100%
within 1.5 mg/m3
13
samples
1.23
dust max (mg/m3)
0
over MSHA ECV
ⓘ
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.10 samples taken by MSHA inspectors, 3 by the operator.
Most-sampled occupations
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE4
- BULLDOZER OPERATOR3
- HIGHLIFT OPERATOR/FRONT END LOADER2
Silica (quartz)
Last sampled: 2018-03-08, 8 years ago2.7
silica avg (%)
1
samples
2.7
silica max (%)
Most-sampled occupations
- BULLDOZER OPERATOR1
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2018-02-28, 8 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.0%
over PEL
6
samples
Most-sampled occupations
- HIGHLIFT OPERATOR/FRONT END LOADER2
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE2
- AUGER HELPER1
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Top causes
- HANDLING OF MATERIALS 1 non-fatal
Incident timeline
2017
1
Operators under this controller
Mines on record
- Pegs Branch KY
For insurers, brokers, and safety consultants
Where Stephen F Carey stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.