100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
23
inspections on record
1,461
inspection hours
5.4
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
79 citations across 1,461 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$6K
proposed penalties
$6K
current assessed
$6K
paid to date
$0
outstanding
79 assessments are final orders; 1 contested dockets.
Of $55 in penalties contested before the Commission, $55 was upheld in final decisions.
As of the most recent assessment on 2006-10-24.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2006
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000 and are withheld below 20,000 hours in a year. Employment reports reach back to 1983, but those earlier years come from MSHA's archived file format and are not used in rates.
9.22
total case rate
5.18
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 3.41 and the all-US-mining average was 3.91 cases per 100 workers.
Year
total case rate
days-away
fatal
2006
9.22
5.18
0.000
2005
2.52
1.51
0.000
2004
4.02
0.67
0.000
2003
0.92
0.00
0.000
2002
2.10
0.00
0.000
2001
4.97
0.00
0.000
2000
3.60
1.20
0.000
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2005-10-26, 20 years ago
0%
of limit-tested samples over the exposure limit
17
samples
16
limit-tested
Most sampled contaminants
Quartz, respirable, >1% Qtz11
Molybdenum dust5
Respirable dust, <.1mg1
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Contested penalties
ⓘA reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this controller contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
THE VICTIM WAS OPERATING A VOLVO BM-A30J, 30 TON TRUCK HAULING MILL TAILINGS. HE WAS RETURNING EMPTY DOWN A HAUL ROAD WITH A 20% GRADE AND LOST CONTROL OF THE TRUCK.THE TRUCK RAMMED THROUGH A 7-FOOT HIGH BERM AND DOWN TO AN ACCESS RAMP, APPROXIMATELY 15 FT BELOW. HE HAD COMPLETED EIGHT LOAD CYCLES PRIOR TO THE ACCIDENT. THE VICTIM WAS WEARING A SEAT BELT.
For insurers, brokers, and safety consultants
Where Steven Mooney stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes
dust and quartz as separate files and never the silica figure itself. We derive it per sample,
score it against the limit, and set the operator's injury rate against a benchmark built from
the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality
history. Delivered as a PDF with the underlying data as CSV.