Mining Incidents

U S Silver & Gold Inc: 704 MSHA citations controller

MSHA controller ID: 0106783

Watch this controller

Email me when a new MSHA incident is filed at any mine U S Silver & Gold Inc controls.

Fatalities
0
Total incidents
215
Mines on record
2
Years on record
2012–2019
Compliance record
MSHA citations since 2012
704
citations
138
significant & substantial
$434,155
proposed penalties
$284,054
paid to date
65% of proposed penalties paid to date, a $150,101 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2012
116
inspections on record
8,936
inspection hours
7.9
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
704 citations across 8,936 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$434K
proposed penalties
$284K
current assessed
$284K
paid to date
$417
outstanding
686 assessments are final orders; 31 contested dockets.
Of $279K in penalties contested before the Commission, $129K was upheld in final decisions.
As of the most recent assessment on 2020-11-10.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
20.1%
significant & substantial
4.8%
high negligence or reckless
20.1%
reasonably likely or greater
44.9%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 8.7% low, 86.4% moderate, 4.8% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2019
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
10.68
total case rate
7.54
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 1.94 and the all-US-mining average was 2.32 cases per 100 workers.
Year total case rate days-away fatal
2019 10.68 7.54 0.000
2018 6.63 1.89 0.000
2017 7.39 3.69 0.000
2016 8.93 4.70 0.000
2015 9.59 1.20 0.000
2014 7.75 0.82 0.000
2013 5.78 0.50 0.000
2012 8.62 1.57 0.000
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2018-08-14, 8 years ago
52%
of limit-tested samples over the exposure limit
31
samples
29
limit-tested
Most sampled contaminants
  • Diesel particulate (total carbon)139 over
  • Quartz, respirable, >1% Qtz125 over
  • Lead, inorganic dust21 over
  • Arsenic dust2
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
137 citations taken to the federal commission · 19% of citations on record
  • Settled 132 · 96%
  • Stood as issued 5 · 4%
65%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 93 decided S&S contests · industry: 79%
54%
Penalty reduction in decided contests
$279K proposed, $129K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2019-06-11. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this controller contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2016-0395 Settlement Barbour 2016 $70K → $230
WEST 2016-0221 Settlement Barbour 2016 $38K → $20K
WEST 2014-0437 Settlement Manning 2015 $23K → $21K
WEST 2015-0351 Settlement McCarthy 2016 $22K → $12K
WEST 2016-0220 Settlement Barbour 2016 $17K → $947
WEST 2014-374 Settlement Manning 2015 $14K → $10K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2019
25
2018
28
2017
22
2016
26
2015
38
2014
31
2013
31
2012
14

Operators under this controller

Mines on record

For insurers, brokers, and safety consultants

Where U S Silver & Gold Inc stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us