Mining Incidents

William B Sturgill: 2 recorded fatalities controller

MSHA controller ID: C11706

Watch this controller

Email me when a new MSHA incident is filed at any mine William B Sturgill controls.

Fatalities
2
Total incidents
191
Mines on record
10
Years on record
1985–1999
Injury rate, 2000
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 7.74 and the all-US-mining average was 5.64 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2000-08-25, 26 years ago
100%
within 1.5 mg/m3
20
samples
0.80
dust max (mg/m3)
17 samples taken by MSHA inspectors, 3 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR6
  • HIGHLIFT OPERATOR/FRONT END LOADER3
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE3

Silica (quartz)

Last sampled: 2000-09-01, 25 years ago
12.9
silica avg (%)
2
samples
18.8
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR1
  • GROUNDMAN1
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Top causes

Incident timeline

1999
3
1998
5
1997
16 (1f)
1996
10
1995
12
1994
15
1993
20
1992
33
1991
18
1990
23 (1f)
1989
14
1988
13
1987
7
1986
1
1985
1

Operators under this controller

Mines on record

Fatalities under this controller

2 recorded
July 31, 1997 KY · Coal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver Fatality · POWERED HAULAGE
Big Elk Creek Coal Company Inc · Fall from machine

EE WAS OPERATING A ROCK TRUCK. WHEN HE BACKED OVER A SPOIL BANK.

October 18, 1990 KY · Coal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver Fatality · POWERED HAULAGE
Big Elk Creek Coal Company Inc · Fall from machine

EMPL OPERATING ROCK TRUCK,BACKED OVER BERM HOLLOW-FILL AND EMPL JUMPED OR WAS THROWN FROM OVERTURNING TRUCK AND WAS COVERED WITH FILL ROCK.

For insurers, brokers, and safety consultants

Where William B Sturgill stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us