William Haskins; Michael D Turner: 158 MSHA citations controller
MSHA controller ID: C15801
William Haskins; Michael D Turner has had no fatalities among 2 reportable incidents since 1999. MSHA has proposed $13K in penalties since 2000.
Watch this controller
Email me when a new MSHA incident is filed at any mine William Haskins; Michael D Turner controls.
- Fatalities
- 0
- Total incidents
- 2
- Mines on record
- 1
- Years on record
- 1999–2000
Compliance record
MSHA citations since 2000
158
citations
61
significant & substantial
$13,089
proposed penalties
$13,089
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
80
inspections on record
2,385
inspection hours
6.6
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.158 citations across 2,385 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$13K
proposed penalties
$13K
current assessed
$13K
paid to date
$0
outstanding
157 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2007-06-05.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.38.9%
significant & substantial
6.4%
high negligence or reckless
38.9%
reasonably likely or greater
15.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 32.5% low, 61.1% moderate, 6.4% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2006
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000 and are withheld below 20,000 hours in a year. Employment reports reach back to 1983, but those earlier years come from MSHA's archived file format and are not used in rates.0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 4.87 and the all-US-mining average was 3.91 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2006 * | 0.00 | 0.00 | 0.000 |
| 2005 * | 0.00 | 0.00 | 0.000 |
| 2004 * | 0.00 | 0.00 | 0.000 |
| 2003 * | 0.00 | 0.00 | 0.000 |
| 2002 * | 0.00 | 0.00 | 0.000 |
| 2001 * | 0.00 | 0.00 | 0.000 |
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2007-04-09, 19 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.96%
within 1.5 mg/m3
457
samples
3.35
dust max (mg/m3)
213 samples taken by MSHA inspectors, 244 by the operator.
Most-sampled occupations
- CONTINUOUS MINER OPERATOR255
- SHUTTLE CAR OPERATOR (STANDARD SIDE)51
- ROOF BOLTER (SINGLE HEAD)31
Silica (quartz)
Last sampled: 2006-06-28, 20 years ago4.9
silica avg (%)
22
samples
15.1
silica max (%)
Most-sampled occupations
- CONTINUOUS MINER OPERATOR20
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2006-08-14, 20 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.0%
over PEL
24
samples
Most-sampled occupations
- SHUTTLE CAR OPERATOR (STANDARD SIDE)7
- CONTINUOUS MINER OPERATOR5
- ROOF BOLTER (SINGLE HEAD)5
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Top causes
- POWERED HAULAGE 2 non-fatal
Incident timeline
2000
1
1999
1
Operators under this controller
Mines on record
For insurers, brokers, and safety consultants
Where William Haskins; Michael D Turner stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.