Limestone Products Incorporated · Fall from machine
Employee climbed on track of track hoe to show mechanic blown hose. Was getting off and slipped and fell about 3 ft. to ground, landing on un-crushed lime rock hurting right leg.
1415 Newberry Metal/Non-Metal
Arcosa Aggregates Gulf Coast, LLC
· Surface
Controlled by
Arcosa, Inc
Newberry,
Alachua County,
FL
·
Active
MSHA Mine ID: 0800048
Watch this mine
Email me when a new MSHA incident is filed at 1415 Newberry.
- Fatalities
- 0
- Total incidents
- 7
- Years on record
- 2000–2022
- Latest incident
- Apr 2022
Compliance record
MSHA citations since 2000
208
citations
60
significant & substantial
$52,648
proposed penalties
$52,648
paid to date
Source: MSHA violations data, updated weekly.
Quarterly safety rates
Citations per million employee-hours, as reported to MSHA
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 27,120 | 4 | 0 | 147.5 |
| 2025 Q3 | 27,134 | 2 | 1 | 73.7 |
| 2025 Q2 | 24,796 | 1 | 0 | 40.3 |
| 2025 Q1 | 22,456 | 0 | 0 | 0.0 |
| 2024 Q4 | 25,612 | 2 | 0 | 78.1 |
| 2024 Q3 | 24,632 | 0 | 0 | 0.0 |
| 2024 Q2 | 23,896 | 2 | 0 | 83.7 |
| 2024 Q1 | 22,558 | 0 | 0 | 0.0 |
Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
No fatalities recorded at this mine.
Reportable incidents
7 on file2022 · 1 incident
2018 · 1 incident
November 30, 2018
FL · Metal/Non-Metal
maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech
MACHINERY
Limestone Products Incorporated · Caught in, under or between a moving and a stationary object
It was a clear and bright day about 60 degrees. EE, the mechanic was called to the Cat D9R Bulldozer. EE had to replace the track roller cap. EE used a 2 ton Hyd. jack to lift the roller up. After replacing the roller, the jack caused the impact gun to crush the thumb and index finger on left hand.
2011 · 1 incident
March 22, 2011
FL · Metal/Non-Metal
maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech
HANDTOOLS (NONPOWERED)
Limestone Products Incorporated · Struck by flying object
The worker was trying to remove a tooth from ripper shank with a hammer. A piece of metal chipped off and entered the worker's left leg.
2009 · 1 incident
March 18, 2009
FL · Metal/Non-Metal
maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech
HANDLING OF MATERIALS
Limestone Products Incorporated · Struck by... (Not Elsewhere Classified)
Mechanic was installing a new dump cable on our dragline. While tightening the cable socket, the cable slipped out of the clamp and struck the mechanic in the face. The mechanic suffered a laceration on his upper lip and a fracture to his upper jaw.
2006 · 1 incident
October 24, 2006
FL · Metal/Non-Metal
bulldozer operator, universal operator, heavy equipment operator, operating engineer
MACHINERY
Limestone Products Incorporated · Struck by falling object
Drill stem became frozen. Operator was trying to free up drill stem. Drill stem cup weld broke. Drill stem fell on operators toe.
2005 · 1 incident
July 5, 2005
FL · Metal/Non-Metal
crane operator, mobile equipment operator (meo), dragline operator, dropball operator, rigger
HANDLING OF MATERIALS
Limestone Products Incorporated · Over-exertion (Not Elsewhere Classified)
WHILE ASSISTING THE MECHANIC, EE WAS MANUALLY TURNING THE DRUM ON THE 88B DRAGLINE SO THE MECHANIC COULD CHECK THE LININGS AND HE SAID HE FELT A POP IN HIS RIGHT SHOULDER AND ARM AREA.
2000 · 1 incident
June 28, 2000
FL · Metal/Non-Metal
bulldozer operator, universal operator, heavy equipment operator, operating engineer
MACHINERY
Limestone Products Incorporated · Fall from machine
WHILE GETTING ON CAT D8K BULLDOZER, HIS RIGHT FOOT SLIPPED TO THE INSIDE OF THE BLADE ARM, CAUSING HIM TO LOSE HIS BALANCE & HIT HIS RIGHT SHOULDER ON THE DOZER TRACKS. AFTER HITTING HIS SHOU LDER, HE FELL BACKWARDS TO THE GROUND, HITTING HIS HEAD.