Beartrack Mine Metal/Non-Metal

EMPLOYEE STATES THAT AS HE WAS CHECKING PART NUMBERS OF A TEREX 2766B HAUL TRUCK, THE SAFETY CHAIN ON THE HOOD BROKE. THIS CAUSED HIM TO FALL TO THE GROUND, CAUSING A LACERATION TO HIS FACE. HE WAS EXAMINED AND EIGHT SUTURES WERE APPLIED AND THE EMPLOYEE WAS RELEASED TO RETURN TO WORK FULL DUTY.

EE WAS REMOVING A TIRE/WHEEL FROM A 992 CATERPILLER FE LOADER HE APPARENTLY REMOVED ALL LUGNUTS & THE TIRE/WHEEL FELL ON EE CAUSING INJURY FROMWAIST DOWN---LTR RECD 7/17/00 LEFT LEG WAS AMPUTA TED BELOW THE KNEE

EMPLOYEE WAS ASSISTING OTHERS IN DEPLOYING BENTOMAT LINER. THE ROLL OF LINER ROLLED OVER HIS LEGWHEN HE TRIPPED ON A WRINKLE IN THE LINER. THE SITUATION CAUSED THE EMPLOYEE TO OVEREXTEND HIS L EGS(SPREAD) CAUSING A SEVERE STRAIN TO HIS GROIN

EE FELT DISCOMFORT WHILE PULLING PIPE ON LEACH PAD. DIAGNOSED WITH LEFT INGUINAL HERNIA. HERNIA REPAIRED OUTPATIENT. EE RETURNED TO WORK--NO LOST TIME--ALTHOUGH RETURNED TO RESTRICTED DUTY.

WHILE MOVING A PIPE RACK A PART OF THE RACK SWIVELED AND MASHED EE'S FINGER. RACK WAS BEING MOVED BY HAND WITH 2 PERSONS. FINGERTIP REQUIRED SUTURES.

EE WAS ATTACHING A KNIFE TO A LATH STAKE WITH TAPE. THE KNIFE SLIPPED AND LACERATED A 3/4" CUT ON THE LEFT HAND WHICH REQUIRED SUTURES.

A CABLE SLING FAILED CAUSING A CONVEYOR COUNTERWEIGHT TO DROP WHICH CAUSED THE CABLE ATTACHED TO COUNTERWEIGHT TO CONTACT EE AT A HIGH RATE OF SPEED.

EMPLOYEE WAS CUTTING PLASTIC COVERING FROM PVC PIPING WHEN THE KNIFE ANOTHER PERSON WAS USING CONTACTED HIS LEFT THUMB CAUSING A 1" LACERATION REQUIRING STITCHES.

AN EMP INCURRED A RUPTURED HERNIA WHILE PULLING A HOSE FROM A FUEL TRUCK.

LOWERING SPERRY-SUN TESTING TOOL INTO DRILL HOLE OVERSHOT JARRED RELEASING TOOL ONTO HELPERS HAND AND DRILL ROD--TREATED BROKEN FINGERS, LACERATIONS--INSTALLED METAL PIN.

HOISTING RODS. SLIPPED ON DECK OF UDR DRILL, TEARING MUSCLES IN LOWER BACK.

EE WAS BURNED WHILE ATTEMPTING TO LIGHT A PROPANE WATER HEATER.

EMPLOYEE WAS STARTING A GAS POWERED WELDER THAT HAS AN EXTERNAL FLY WHEEL, WITH A PULL ROPE START SYSTEM. THE PULL ROPE GOT HUNG-UP IN THE FLY WHEEL, EE WAS HIT IN THE LEFT FOREARM BY THE WOOD EN HANDLE ON THE PULL ROPE. THE WOODEN HANDLE EMBEDDED ITSELF IN THE FLESH OF HIS FOREARM, REQUIRING MEDICAL ATTENTION.

EMPLOYEE WAS REPLACING A LIGHT FIXTURE. THE FIXTURE BEGAN TO FALL AND WHEN THE EMPLOYEE TRIED TO CATCH IT, THE FIXTURE CUT HIS GLOVE AND THUMB.

80 MIL. LINER WAS PLACED ON TOP OF GEONET ON THE CONSTRUCTION OF PREGNANT SOLUTION POND SLOPE. THE LINER WAS PLACED IN A ATRENACH AT THE TOP OF THE POND WITH SAND BAGS PLACED ON THE LINER TO H OLD IT IN. FOUR MEN WERE ON THE LINER WITH ABOUT4" OF NEW SNOW. THE NUMBER OF SAND BAGS WERE INSUFFICIENT AND LINER ROLLED DOWN THE SLOPE.

A TRACK DOZER WAS APPROACHING AN AREA ON A SLOPE ABOVE A GROUP OF LABORERS. THE ACTING FOREMAN TOO EXCITEDLY CALLED TO THE CREW TO VACATE THE AREA. THE EXCITED EES, EE BEING ONE, RAN FROM THE AREA IN A HASTE THAT WAS EXCESSIVE.

USING AN ELECTRIC SURFACE GRINDER TO GRIND WELD ON NOZZLE REINFORCING PLATE. METAL PARTICLE ENTERED IRIS OF EYE.

WHILE PRYING LOOSE ROCKS WITH A SHOVEL, PREPARING THE BASE FOR THE LEACH PAD, EE HIT HER KNEE WITH A SHOVEL HANDLE.

EE WAS CLIMBING OFF BACKHOE WHEN HE SLIPPED. HISFOOT CAME DOWN ON SMALL ROCK & BROKE HIS HEEL.