Miner was attempting to clear an obstructed troughing roller with a small hammer. The miner was standing on the cross support of the screen deck #1, clearing a roller on the 1st under screen belt. Miner slipped and EE's right arm fell into the back side of the guarding, EE's right hand came in contact with the belting and roller resulting in a cut to EE's right middle finger.
Rilite Aggregate Metal/Non-Metal
Watch this mine
Email me when a new MSHA incident is filed at Rilite Aggregate.
- Fatalities
- 0
- Total incidents
- 19
- Years on record
- 2000–2021
- Latest incident
- Aug 2021
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 8,489 | 2 | 0 | 235.6 |
| 2025 Q3 | 9,651 | 0 | 0 | 0.0 |
| 2025 Q2 | 7,819 | 4 | 0 | 511.6 |
| 2025 Q1 | 8,523 | 0 | 0 | 0.0 |
| 2024 Q4 | 7,805 | 2 | 0 | 256.2 |
| 2024 Q3 | 9,417 | 0 | 0 | 0.0 |
| 2024 Q2 | 8,675 | 0 | 0 | 0.0 |
| 2024 Q1 | 7,923 | 0 | 0 | 0.0 |
Reportable incidents
19 on file2021 · 1 incident
2017 · 1 incident
Operator with fully loaded haul truck traveled down from upper loading area, along approximately a 1,000' long haul road with an approximate 15% grade. Operator noticed a situation with the brake system on truck. As EE approached lower storage area EE was unable to stop. Operator diverted truck against stored material, contacting stored boulders, overturning dump bed and stopping.
2012 · 1 incident
While servicing water truck grease hose ruptured sending grease thru latex glove and injuring the right index finger.
2011 · 1 incident
Wind blew hard hat off employee head. While picking hard hat off the ground employee hit his head on the sand wash plant.
2008 · 2 incidents
Loader operator slipped while descending equipment ladder, spraining right foot.
While setting steel deck plate into position, contractor lost control of plate, allowing plate to shift/slide into ladder. This sudden movement dislodged worker off ladder, individual fell approx. 6'8" to ground.
2006 · 2 incidents
While changing out a damaged gear box, cleaning the shaft with a grinder, grinder bounced off the head pulley, kicking back and making contact with his left index finger. The incident opened a one inch gash which required 4 stitches to close.
Mechanic, after repairing /replacing screens on screen deck at old plant, had his finger (right pinky) push thru screen. Finger hit screen deck assembly and was broken. Emergency room visit was required where finger was isolated & splinted. On 7-20 surgery was performed on finger.
2005 · 1 incident
CLEANING PLANT AND HIT LEFT SHIN ON A LEG OF PLANT.
2003 · 1 incident
CUTTING BELT BAND WITH KNIFE AND CUT LEFT THUMB.
2001 · 3 incidents
TRIPPED BACKWARDS OVER A BOARD. (NOT REPORTED UNTIL 9/16/01).
LOOKED INTO REAR VIEW MIRROR WHILE BACKING UP TRUCK WHEN WIND BLEW DIRT INTO EYE.
WHILE CHANGING BUCKET ON BOBCAT EMPLOYEE LOCKED THE LEVER IN PLACE AND BEFORE HE COULD REMOVE HIS HAND THE OPERATOR PULLED THE BUCKET BACK SMASHING HAND.
2000 · 6 incidents
WIND BLEW DIRT INTO RIGHT EYE.
PULLING DEBRIS OUT OF MATERIAL-WHEN GETTING BACK INTO LOADER FELT PAIN IN GROIN AREA.
CLEANING YARD AND WAS STUNG BY A BEE.
WHEN LIFTING A SCREEN INTO PLACE IT SLIPPED OUT OF HAND AND FELL ON LEFT LEG CUTTING THE LEG.
CHECKING PLANT FROM CONCRETE PLATFORM--LOST FOOTING AND FELL ONTO GROUND, INJURING RIGHT ANKLE AND FOOT.
SHUTTING OFF MOTOR.