Moore's Station QuarryMetal/Nonmetal

Employee received a scrape on right calf area. Employee initially refused medical evaluation. The scrape became infected which resulted in medical treatment which resulted in 3 days lost time.

Piece of metal fell on employee's foot

Employee was using a welding cutting torch when a piece of hot slag burned EE's foot.

While operation track dozer, employee jammed shoulder on control stick.

Employee was tightening a hose connection on a hydraulic hose when employee felt a sharp pain in neck.

Employee was climbing ladder on front-end loader to enter the operator's cab when EE felt a pop in EE's knee causing a strain.

Employee was backing away from road grader and tripped

Employee was moving gear box when EE felt a strain in the shoulder.

Employee fell from work level to level below

Employee was assisting with loading scrap into dumpster and finger got caught between fork of machine and dumpster

Employee was descending a stairway when they missed a step and slipped.

Employee was placing a sledge hammer into the bed of a pickup truck. while placing the hammer in the bed employee lost control of the hammer and the handle swung up and struck employee in the left forehead.

Employee was removing part from shaker when part fell. Employee lost balance when trying to avoid part falling against machine. Employee suffered contusion to left rib area.

Employee stated that after lifting screen, felt pain in right bicep area.

Employee bent over to lift a chain from the ground when ee felt a pull on right side-groin area. EE was diagnosed with a groin sprain.

Employee was changing a screen deck when EE felt a pain in right side. EE was diagnosed with a lower right rib strain.

Employee was stepping off a ladder when he turned his ankle causing sprain.

Employee was cleaning build-up from pulley when his right arm was caught between the pulley and the conveyor belt causing fracture to left hand fingers, arm and scapula.

Employee's right wrist struck a hot knife tool that a fellow employee was holding causing a laceration requiring 3 stitches.

Employee was handling a 5 gallon pail of stone when he felt pain in his right elbow. He later developed an infection in his right arm.

Employee was walking down stairs, He began to fall and reached for hand rail. His falling weight caused him to strain his right triceps.

Employee fell approx 18 inches when he lost his balance when climbing on to equipment. He hit the back of his head on the ground causing a contusion.

Employee stated that on 3/6/12 a rubber Main Frame Liner fell against his left calf. He was sent to a medical facility on 3/12/12 when he developed swelling. The diagnosis was a contusion.

Employee complained of right wrist pain from operating joy stick on 992 loader, on 2/26/12. Diagnosis 5/18/12, Operation 6/6/12. No lost time or restrictions until 6/6/12.

Employee was shovelling stone when he strained his lower back.

While climbing ladder to get into a front-end loader, employee slipped and scrapped his lower leg. On 7/21 he indicated leg was swollen and was sent to medical clinic for treatment diagnosis: cellulites

Employee stated that while shaking out dust from a rag after wiping down truck dashboard, the tip of rag hit him in his right eye causing abrasion.

Employee was removing a hose clamp from a water pump when he felt a pop in his right ring finger. Diagnosis: Tendon strain.

Employee was putting air in low tire on pick up truck. The tire exploded sending grit into employee's right eye causing abrasion.

Employee was striking an allen key socket into an allen key bolt with a hammer. A piece of the socket broke off and hit him on his left forearm causing laceration - 6 stitches.

Employee was arc welding in a chute. That night he experienced a burning sensation in his eyes. He went to his local emergency room and was diagnosed for flash burn.

Employee was cleaning a shaker chute with a 20 pound chipping hammer, when the hammer broke thru encrusted material, he was pitched foward and felt lower back pain.

Employee was using a utility knife to cut a plastic bottle. The knife slipped and cut employee's right wrist - 3 stitches plus tetanus shot.

Employee was removing bolts on a surge tank cover using an air impact gun. When a bolt broke, the gun fell out of his right hand and struck his left index finger, causing a laceration and contusion.

Employee was removing a broken feeder plate and after the last bolt was removed, the plate released, striking employee on the back of his hard hat.

EE was using a wire wheel grinder. He dropped the tool and the spinning wire brush struck him on his left thigh, causing an abrasion to his skin.

EE states that he had pain on his left elbow for some time from shifting gears in front end loader.

Employee stated he developed pain in his left elbow from operating equipment over time.

Employee was lifting a generator trailer tongue to connect it to a vehicle and he felt a pull in his left elbow.

Employee was cutting brush with a machete, when he struck himself on the right shin with the blade, causing laceration - 3 stitches.

Employee was holding a wrench and turned his body slightly when he felt a pain in his lower back. He was not apply torque to the wrench. He was diagnosed with a thoratcic sprain.

Employee was assisting in the installation of an adjustment ring on #4 crusher. The over-head crane was trolling the piece into position when employee's arm was pinched between the ring and the structural I-Beam.

Employee was lifting shaker screen into position when he strained his lower back.

Employee was shoveling and lifting screens throughout the day. He noticed mild pain in his abdomen and a small bubble near his navel. He was diagnosed to have a hernia.

Employee was unloading a 20' piece of drill casing from the back of a truck when his left index finger was caught between the pipe and a rock on the ground causing a laceration requiring 2 stitches.

Employee was hand shoveling stone into a hole prior to blasting operation. Later that day he complained of numbness in his chest and fingers. diagnosis: pulled chest muscle.

Employee complained of pain in elbow. said pain started in late 2003. diagnosed as tendonitis due to repetitive motion of steering 988 loader.

EE was positioning a wing pulley on the welding table and pulled a muscle in his neck. the pulley weighed approx. 100 lbs an was being slid on the table.

WHILE REMOVING DECKING PRIOR TO REMOVING STANDARD CRUSHER, EE FELL THROUGH OPENING. EE WAS NOT AT HIS ASSIGNED WORK STATION.

EMPLOYEE WAS MOVING A BULL SCREEN INTO POSITION USING A COME-ALONG. THE SCREEN PINCHED HIS RIGHT PINKY BETWEEN I-BEAM AND THE COME-ALONG HOOK.

WHILE ATTEMPTING TO LIFT A 226LB BEARING FROM THE CAB OF THE DELIVERY TRUCK, THE EMPLOYEE STRAINED HIMSELF.

WHILE LOWERING A CORE CHUTE ON TO A CONVEYER BELT, THE CHUTE SLIPPED PINCHING EMPLOYEE'S HAND BETWEEN CHUTE AND CONVEYER SIDE RAIL CAUSING SPRAIN AND BRUISE.

EMPLOYEE WAS PUSHING A SCREEN OUT OF A SHAKER WHEN A PIN ROLLED DOWN THE SCREEN STRIKING EMPLOYEE IN MOUTH.

WHILE WALKING AROUND LOADER DURING PRE-TRIP INSPECTION, EMPLOYEE SLIPPED ON ICE.

EE WAS COMMING DOWN STD. TOWER STEPS AND SLIPPED ON ICE 3 STEPS FROM BOTTOM AND STRUCK HIS TAIL BONE ON REMAINING STEPS.

EMPLOYEE STATED HE TRIPPED ON A ROCK.

WHILE PUTTING ON WORK CLOTHES, EMPLOYEE FELT SOMETHING ENTER EYE.