Employee was drilling concrete and cleaning holes to install studs. Concrete dust got in face and eyes.
Lake Hopatcong Quarry: 216 MSHA citations Metal/Non-Metal
Lake Hopatcong Quarry has $51K in proposed MSHA penalties and $235 outstanding across 4 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Lake Hopatcong Quarry.
- Fatalities
- 0
- Total incidents
- 105
- Years on record
- 1984–2026
- Latest incident
- May 2026
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Lake Hopatcong Quarry has $51K in proposed MSHA penalties and $235 outstanding across 4 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 10 · 100%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| YORK 2007-72M | Settlement | Hodgdon | 2008 | $6K → $300 |
| YORK 2010-175M | Settlement | Lesnick | 2012 | $4K → $2K |
| YORK 2006-52M | Settlement | Lesnick | 2006 | $3K → $2K |
| YORK 2017-0100 | Settlement | Lesnick | 2017 | $1K → $1K |
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2025-09-04
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.- Quartz, respirable, >1% Qtz195 over
- Respirable dust, <.1mg9
- Arsenic fumes1
- Beryllium fumes1
Show the individual readings (43)
| Date | Contaminant | Concentration | Limit | Conc / limit | Occupation |
|---|---|---|---|---|---|
| 2022-10-18 | Quartz, respirable, >1% Qtz | 0.57 | 0.56 | 1.02 | Utility Man |
| 2020-01-22 | Quartz, respirable, >1% Qtz | 2 | 1.49 | 1.34 | Welder, etc. |
| 2018-05-02 | Quartz, respirable, >1% Qtz | 1.54 | 1.51 | 1.02 | Laborer, Bullgang |
| 2015-11-18 | Quartz, respirable, >1% Qtz | 1.92 | 1.6 | 1.20 | Utility Man |
| 2007-08-01 | Quartz, respirable, >1% Qtz | 1.37 | 1.35 | 1.01 | Crusher Oper/Worker |
| 2025-09-04 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2025-09-04 | Respirable dust, <.1mg | 0 | Laborer, Bullgang | ||
| 2025-09-04 | Respirable dust, <.1mg | 0 | Screen/Scalper Operator | ||
| 2023-10-12 | Respirable dust, <.1mg | 0 | Washer Operator | ||
| 2023-10-12 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2023-10-12 | Respirable dust, <.1mg | 0 | Washer Operator | ||
| 2022-10-18 | Respirable dust, <.1mg | 0 | Utility Man | ||
| 2022-10-18 | Quartz, respirable, >1% Qtz | 0.17 | Utility Man | ||
| 2020-05-06 | Quartz, respirable, >1% Qtz | 0.15 | Welder, etc. | ||
| 2020-01-22 | Quartz, respirable, >1% Qtz | 0.63 | 1.05 | 0.60 | Iron Worker |
| 2020-01-22 | Quartz, respirable, >1% Qtz | 0.53 | 1.29 | 0.41 | Iron Worker |
| 2020-01-22 | Quartz, respirable, >1% Qtz | 0.71 | 1.01 | 0.70 | Cleanup Man |
| 2018-05-02 | Quartz, respirable, >1% Qtz | 1.17 | 2.07 | 0.57 | Laborer, Bullgang |
| 2018-05-02 | Quartz, respirable, >1% Qtz | 0.68 | 1.07 | 0.64 | Laborer, Bullgang |
| 2018-02-13 | Manganese fumes | 2.1 | 5 | 0.42 | Welder, etc. |
| 2018-02-13 | Arsenic fumes | 0 | 1500 | 0.00 | Welder, etc. |
| 2018-02-13 | Beryllium fumes | 0.2 | 6 | 0.03 | Welder, etc. |
| 2018-02-13 | Cadmium oxide fumes | 1.37 | 100 | 0.01 | Welder, etc. |
| 2018-02-13 | Chromium, insoluble | 0 | 3 | 0.00 | Welder, etc. |
| 2018-02-13 | Cobalt fumes | 0.98 | 300 | 0.00 | Welder, etc. |
| 2018-02-13 | Copper fumes | 5.69 | 300 | 0.02 | Welder, etc. |
| 2018-02-13 | Iron oxide fumes | 4.6 | 20 | 0.23 | Welder, etc. |
| 2018-02-13 | Lead fumes | 0 | 450 | 0.00 | Welder, etc. |
| 2018-02-13 | Magnesium oxide fumes | 0.86 | 20 | 0.04 | Welder, etc. |
| 2018-02-13 | Molybdenum fumes | 0 | 20 | 0.00 | Welder, etc. |
| 2018-02-13 | Nickel fumes | 0.02 | 3 | 0.01 | Welder, etc. |
| 2018-02-13 | Vanadium fumes | 2.55 | 50 | 0.05 | Welder, etc. |
| 2018-02-13 | Zinc oxide fumes | 0.05 | 10 | 0.01 | Welder, etc. |
| 2015-11-18 | Unlisted Particulate, respirable, <1% Qtz | 0.41 | Drill Operator, Rotary | ||
| 2015-11-18 | Respirable dust, <.1mg | 0 | Utility Man | ||
| 2015-11-18 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2007-08-01 | Quartz, respirable, >1% Qtz | 0.18 | 1.86 | 0.10 | Drill Helper |
| 2007-08-01 | Quartz, respirable, >1% Qtz | 0.5 | 1.7 | 0.29 | Utility Man |
| 2004-10-28 | Quartz, respirable, >1% Qtz | 0.33 | 2.61 | 0.13 | Crusher Oper/Worker |
| 2004-10-28 | Quartz, respirable, >1% Qtz | 0.2 | 1.48 | 0.14 | Crusher Oper/Worker |
| 2004-10-28 | Quartz, respirable, >1% Qtz | 0.34 | 2.06 | 0.17 | Drill Operator, Rotary Air |
| 2004-04-07 | Quartz, respirable, >1% Qtz | 0.27 | 1.46 | 0.18 | Crusher Oper/Worker |
| 2004-04-07 | Quartz, respirable, >1% Qtz | 0.51 | 1.64 | 0.31 | Crusher Oper/Worker |
Lake Hopatcong Quarry recorded 0.00 reportable injury cases per 100 full-time workers in 2025.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2025 * | 0.00 | 0.00 | 0.000 |
| 2024 * | 2.56 | 0.00 | 0.000 |
| 2023 * | 4.95 | 4.95 | 0.000 |
| 2022 * | 0.00 | 0.00 | 0.000 |
| 2021 * | 2.71 | 2.71 | 0.000 |
| 2020 * | 5.06 | 2.53 | 0.000 |
| 2019 * | 6.62 | 0.00 | 0.000 |
| 2018 * | 2.85 | 0.00 | 0.000 |
- Tri County Asphalt Corp 1950 to 1989
- Wimpey Minerals Usa Inc 1989 to 1996
- Tarmac America Inc 1996 to 1996
- Weldon Quarry Company LLC 1997 to present
| Year | Employees |
|---|---|
| 2026 | 30 |
| 2025 | 31 |
| 2024 | 35 |
| 2023 | 35 |
| 2022 | 35 |
| 2021 | 36 |
| 2020 | 39 |
| 2019 | 39 |
| 2018 | 38 |
| 2017 | 35 |
| 2016 | 33 |
| 2015 | 40 |
| 2014 | 34 |
| 2013 | 35 |
| 2012 | 31 |
| 2011 | 34 |
| 2010 | 41 |
| 2009 | 43 |
| 2008 | 41 |
| 2007 | 40 |
| 2006 | 42 |
| 2005 | 39 |
| 2004 | 38 |
| 2003 | 36 |
| 2002 | 36 |
| 2001 | 35 |
| 2000 | 32 |
Lake Hopatcong Quarry sits in Sussex County, New Jersey, where the Census mining category is 0.2% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 24,324 | 3 | 1 | 123.3 |
| 2026 Q1 | 15,288 | 2 | 0 | 130.8 |
| 2025 Q4 | 19,274 | 0 | 0 | 0.0 |
| 2025 Q3 | 20,082 | 3 | 1 | 149.4 |
| 2025 Q2 | 19,895 | 0 | 0 | 0.0 |
| 2025 Q1 | 16,749 | 1 | 0 | 59.7 |
| 2024 Q4 | 20,156 | 0 | 0 | 0.0 |
| 2024 Q3 | 20,503 | 0 | 0 | 0.0 |
Show 98 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 19,947 | 2 | 0 | 100.3 |
| 2024 Q1 | 17,659 | 0 | 0 | 0.0 |
| 2023 Q4 | 23,841 | 4 | 0 | 167.8 |
| 2023 Q3 | 20,599 | 0 | 0 | 0.0 |
| 2023 Q2 | 19,569 | 5 | 1 | 255.5 |
| 2023 Q1 | 16,848 | 0 | 0 | 0.0 |
| 2022 Q4 | 19,754 | 0 | 0 | 0.0 |
| 2022 Q3 | 19,989 | 2 | 1 | 100.1 |
| 2022 Q2 | 23,610 | 11 | 0 | 465.9 |
| 2022 Q1 | 17,100 | 0 | 0 | 0.0 |
| 2021 Q4 | 19,750 | 5 | 2 | 253.2 |
| 2021 Q3 | 21,768 | 2 | 1 | 91.9 |
| 2021 Q2 | 19,770 | 0 | 0 | 0.0 |
| 2021 Q1 | 12,528 | 5 | 2 | 399.1 |
| 2020 Q4 | 15,359 | 0 | 0 | 0.0 |
| 2020 Q3 | 21,429 | 12 | 5 | 560.0 |
| 2020 Q2 | 21,993 | 0 | 0 | 0.0 |
| 2020 Q1 | 20,211 | 9 | 5 | 445.3 |
| 2019 Q4 | 23,468 | 0 | 0 | 0.0 |
| 2019 Q3 | 23,430 | 0 | 0 | 0.0 |
| 2019 Q2 | 24,444 | 3 | 0 | 122.7 |
| 2019 Q1 | 19,246 | 5 | 0 | 259.8 |
| 2018 Q4 | 21,238 | 0 | 0 | 0.0 |
| 2018 Q3 | 16,808 | 0 | 0 | 0.0 |
| 2018 Q2 | 17,301 | 4 | 1 | 231.2 |
| 2018 Q1 | 14,806 | 3 | 0 | 202.6 |
| 2017 Q4 | 21,666 | 0 | 0 | 0.0 |
| 2017 Q3 | 21,166 | 0 | 0 | 0.0 |
| 2017 Q2 | 21,222 | 4 | 2 | 188.5 |
| 2017 Q1 | 17,236 | 10 | 3 | 580.2 |
| 2016 Q4 | 20,774 | 0 | 0 | 0.0 |
| 2016 Q3 | 20,988 | 0 | 0 | 0.0 |
| 2016 Q2 | 19,493 | 3 | 1 | 153.9 |
| 2016 Q1 | 18,496 | 0 | 0 | 0.0 |
| 2015 Q4 | 20,707 | 4 | 2 | 193.2 |
| 2015 Q3 | 21,558 | 0 | 0 | 0.0 |
| 2015 Q2 | 21,461 | 3 | 0 | 139.8 |
| 2015 Q1 | 14,604 | 0 | 0 | 0.0 |
| 2014 Q4 | 21,221 | 1 | 0 | 47.1 |
| 2014 Q3 | 20,420 | 1 | 0 | 49.0 |
| 2014 Q2 | 20,370 | 0 | 0 | 0.0 |
| 2014 Q1 | 16,594 | 6 | 0 | 361.6 |
| 2013 Q4 | 21,208 | 0 | 0 | 0.0 |
| 2013 Q3 | 20,875 | 1 | 1 | 47.9 |
| 2013 Q2 | 22,145 | 2 | 2 | 90.3 |
| 2013 Q1 | 17,475 | 0 | 0 | 0.0 |
| 2012 Q4 | 16,467 | 2 | 0 | 121.5 |
| 2012 Q3 | 16,868 | 0 | 0 | 0.0 |
| 2012 Q2 | 16,471 | 4 | 2 | 242.9 |
| 2012 Q1 | 17,069 | 3 | 1 | 175.8 |
| 2011 Q4 | 16,979 | 0 | 0 | 0.0 |
| 2011 Q3 | 16,450 | 1 | 0 | 60.8 |
| 2011 Q2 | 19,449 | 0 | 0 | 0.0 |
| 2011 Q1 | 12,276 | 3 | 0 | 244.4 |
| 2010 Q4 | 20,317 | 0 | 0 | 0.0 |
| 2010 Q3 | 21,436 | 0 | 0 | 0.0 |
| 2010 Q2 | 25,975 | 4 | 1 | 154.0 |
| 2010 Q1 | 5,521 | 0 | 0 | 0.0 |
| 2009 Q4 | 21,631 | 8 | 3 | 369.8 |
| 2009 Q3 | 25,573 | 0 | 0 | 0.0 |
| 2009 Q2 | 26,138 | 0 | 0 | 0.0 |
| 2009 Q1 | 18,235 | 1 | 0 | 54.8 |
| 2008 Q4 | 24,090 | 0 | 0 | 0.0 |
| 2008 Q3 | 26,426 | 1 | 0 | 37.8 |
| 2008 Q2 | 27,782 | 4 | 0 | 144.0 |
| 2008 Q1 | 18,971 | 0 | 0 | 0.0 |
| 2007 Q4 | 23,531 | 2 | 0 | 85.0 |
| 2007 Q3 | 22,200 | 4 | 0 | 180.2 |
| 2007 Q2 | 25,198 | 0 | 0 | 0.0 |
| 2007 Q1 | 18,466 | 1 | 0 | 54.2 |
| 2006 Q4 | 23,162 | 0 | 0 | 0.0 |
| 2006 Q3 | 25,177 | 2 | 0 | 79.4 |
| 2006 Q2 | 24,868 | 0 | 0 | 0.0 |
| 2006 Q1 | 16,156 | 2 | 1 | 123.8 |
| 2005 Q4 | 24,168 | 0 | 0 | 0.0 |
| 2005 Q3 | 25,146 | 1 | 1 | 39.8 |
| 2005 Q2 | 24,876 | 0 | 0 | 0.0 |
| 2005 Q1 | 23,827 | 0 | 0 | 0.0 |
| 2004 Q4 | 23,339 | 3 | 0 | 128.5 |
| 2004 Q3 | 23,517 | 0 | 0 | 0.0 |
| 2004 Q2 | 22,510 | 11 | 3 | 488.7 |
| 2004 Q1 | 17,403 | 3 | 1 | 172.4 |
| 2003 Q4 | 23,430 | 0 | 0 | 0.0 |
| 2003 Q3 | 23,741 | 0 | 0 | 0.0 |
| 2003 Q2 | 23,064 | 0 | 0 | 0.0 |
| 2003 Q1 | 17,460 | 0 | 0 | 0.0 |
| 2002 Q4 | 22,371 | 0 | 0 | 0.0 |
| 2002 Q3 | 23,007 | 0 | 0 | 0.0 |
| 2002 Q2 | 22,941 | 0 | 0 | 0.0 |
| 2002 Q1 | 17,174 | 0 | 0 | 0.0 |
| 2001 Q4 | 21,038 | 7 | 4 | 332.7 |
| 2001 Q3 | 21,986 | 0 | 0 | 0.0 |
| 2001 Q2 | 21,491 | 0 | 0 | 0.0 |
| 2001 Q1 | 15,904 | 4 | 0 | 251.5 |
| 2000 Q4 | 21,018 | 0 | 0 | 0.0 |
| 2000 Q3 | 20,095 | 0 | 0 | 0.0 |
| 2000 Q2 | 20,723 | 0 | 0 | 0.0 |
| 2000 Q1 | 12,501 | 7 | 0 | 560.0 |
Reportable incidents
105 on file2026 · 1 incident
2025 · 1 incident
Worker was climbing a step ladder when it shifted out from underneath them causing them to grab the catwalk with their left hand which caused a severe muscle strain to their left shoulder.
2024 · 1 incident
Employee was working in hopper to C-24, removing frozen material. While lifting a piece with a co-worker, the co-worker's side slipped out of co-worker's hand catching EE between the material and a piece of steel.
2023 · 2 incidents
Our employee, was washing off crusher deck when a bolt fell out of the crusher box striking them on the left shoulder and their neck.
The employee was using a Skill Saw to cut plastic sheeting when the saw bounced back and sliced employee's thigh.
2022 · 1 incident
Caught finger between hook and roof area of cable while changing drill hammer.
2021 · 1 incident
Worker got cut on finger required three stitches
2020 · 2 incidents
Chisel tip went into cheek of employee.
Standard threshold shift.
2019 · 3 incidents
failed audiogram, sts, employee stated they had cold,
(STS) Standard Threshold Shift
Audiogram fail, STS.
2018 · 2 incidents
While kneeling on cat walk employee used right hand for support and without realizing finger was through it, stood up lacerating right index finger
Employee was moving wooden blocks used for cribbing and weighing approximate 30 lbs., when employee felt a pop in elbow. The blocks were being moved on the back of employee's service truck to access a container.
2015 · 2 incidents
Tripped in pot hole in parking lot at 4:00 AM. Didn't report it till 8:30 AM.
While air arcing plate off dozer blade plate had stress on it and sprung out at top hitting employee in head. Causing laceration to scalp.
2014 · 2 incidents
sts, hearing
Standard threshold shift, hearing
2010 · 2 incidents
Utility knife broke and hit leg
Glass in eye
2009 · 4 incidents
Employee backed onto 3/4 rs pile to dump, pile was undercut and caved, flipped truck over once landing on roof.
Employee was working at the recycle plant, when he slipped off the crusher and fell onto the ladder. He hit a kick plate and got a contusion on the right side, between his rib & hip.
Employee was emptying garbage & stacking pallets when he twisted his lower right back.
Employee was doing winter maintenance. He cut a piece of steel and was going to install it, when steel slipped and fell on his right foot, causing contusion.
2008 · 1 incident
Employee was adjusting dirt shoe spring; he was down on his hand and knees. He turned the wrench once and he felt his back go out.
2007 · 2 incidents
Employee went to assist in replacing rear cover plate on dozer; plate on floor jack on edge. While jacking up, he lost control of plate and his left thumb was pinched between plate and a solid object.
Employee states rust flew up under goggles into his right eye while using hammer. Visions blurry on right side of eye.
2005 · 1 incident
EMPLOYEE WAS OPERATING LOADER THE SEAT SPRUNG HIM UPWARD. AS THE SEAT BELT CAUGHT HIM AND YANKED HIM BACK IN THE SEAT AND SOMETHING POPPED IN HIS BACK.
2004 · 1 incident
EMPLOYEE SLIPPED OFF FUEL TANK GETTING INTO ASPHALT PLANT TRUCK. HE GRABBED THE HANDLE BAR BEFORE LANDING ON THE GROUND & HE PULLED A MUSCLE.
2003 · 2 incidents
EE WAS STRIKING HOPPER WITH A PRY BAR AND THE BAR GOT STUCK IN FROZEN MATERIAL, EE LOST HIS BALANCE AND PRY BAR CAME BACK AND HIT HIM IN THE FACE.
EE WAS CLIMBING BETWEEN WALL & SCREEN STRUCTURE. HIS HARD HAT SHIFTED AS HE WAS CLIMBING AND HE HIT HIS HEAD ON THE COUNTER WEIGHT GUARD ON THE SCREEN. PUT A SERIOUS CUT IN HIS HEAD.
2001 · 6 incidents
EE STEPPED ONTO LOOSE GRAVEL AND HE SLIPPED INJURING HIS BACK. EE WAS WALKING FROM PARKING LOT GOING TO CHANGE CLOTHERS FOR WORK.
WHILE EMPLOYEE WAS WETTING DOWN SHOT THE SPRAY MECHANISM CAME OUT OF ITS HOLDER WHILE EMPLOYEE WAS USING IT. THE FORCE OF THE WATER PRESSURE CAUSED EMPLOYEE TO HIT HIS ARM ON THE PLATFORM RAIL ING.
EMPLOYEE WAS DOING MAINTENANCE UNDER CONVEYER #1AND HE SLIPPED ON MUD AND SLID INTO WASHOUT GULLY JAMMING HIS LEFT KNEE.
EE STEPPED OFF THE BACK OF THE WELDING TRUCK ONTO UNEVEN GROUND AND SPRAINED HIS RIGHT ANKLE.
EMPLOYEE WAS WORKING INSIDE SCREEN CHUTE AND A STEEL PLATE WITH RUBBER PAD FELL ON HIS HAND AS HE WAS EXITING THE CHUTE.
EE WAS WALKING TO SHOP, HE SLIPPED ON ICE AND HIT HIS RIGHT WRIST ON ANOTHER EE'S THERMOS BOTTLE. WAITED UNTI 17TH, HAND AND FINGER SWOLLEN-WENT FOR XRAYS.
2000 · 3 incidents
EMPLOYEE WAS TRIMMING THE SKIRT ON THE CONVEYER AND THE UITILITY KNIFE SLIPPED AND HE CUT HIS FINGER. IT REQUIRED 11 STITCHES.
EE WAS TRYING TO REMOVE BOLT ON THE PRIMARY CRUSHER ALONG WITH INJ EE INJ EE'S THUMB WAS STRUCK BY THE SLEDGE HAMMER WHILE REMOVING THE BOLT
EE CUT RIGHT HAND WHILE REACHING INTO A TOOL BUCKET ON A RAZOR KNIFE BLADE WHICH WAS NOT FULLY RETRACTED REQUIRING STITCHES.
1999 · 6 incidents
WHILE EMPLOYEE WAS DRILLING HE GOT A PIECE OF GRIT IN HIS LEFT EYE.
EE SHIFTED LOADER FROM REVERSE TO FORWARD-FELT SHARP PAIN IN LEFT HAND.
WHILE EE WAS WORKING AROUND PRIMARY HE SLIPPED ON ICE AND BADLY HURT HIS KNEE. BACK TO WORK BUT HAD SURGERY 4/30/99
EE WAS CUTTING A BOLT AND BURNED HIS ARM (LEFT).
EE WAS MOVING PLATES AND PULLED A MUSCLE IN HIS GROIN.
EE WAS DIGGING WITH BAR AND BANGED ELBOW AGAINST SIDE OF CONVEYOR RAIL
1998 · 2 incidents
EE WAS TRIMMING BRUSH NEAR THE QUARRY WHEN HE TWISTED HIS RIGHT KNEE ON ROUGH TERRAIN
STANDING WITH A BRASS BUSHING OF CRUSHER, EMPLOYEE SLIPPED WITH BRASS BUSHING CUTTING BOTH ARMS.
1997 · 5 incidents
EE WAS CLEARING THE FRONT END OF BUCKET ON LOADER, FOREIGN MATTER FLEW INTO HIS EYE.
AN INSECT FLEW UP EE'S SHIRT & BIT HIM ON THE CHEST, IMMEDIATEDLY CAUSING PAIN & IRRITATION.
EE LOST CONSCIOUSNESS WHILE SHOVELING ON JOB.
EMPLOYEE SLIPPED WHLE STEPPING OFF OF TRUCK AND LANDED ON HIS BACK.
WHILE EE WAS CHANGING THE DRILL STEEL, HIS FINGER GOT CAUGHT BETWEEN THE STEEL & THE RACKING, BREACKING HIS FINGER.
1996 · 5 incidents
EE WAS REMOVING A COMEALONG FROM AN OVERHEAD LOCATION AND IT FELL STRIKING HIS EAR
EE WAS MOVING A WATER HOSE WHEN HE FELT PAIN IN HIS BACK
EMP CLIMBED AN ACTIVE STOCKPILE OF 1 1/4" CRUSHED STONE TO CHECK ON CONVEYOR HEAD PULLEY. EMP STUCK HIS ARMS OUT IN FRONT OF HIM TO KEEP FROM FALLING DOWN. EMP'S LEFT FINGER GOT CAUGHT IN HEAD PULLEY BEARING ASSEMBLY. EMP HAD LEFT INDEX FINGER AMPUTATED TO FIRST KNUCKLE. EMP WAS NOT SUPPOSED TO BE ON STOCKPILE.
EE WAS TIGHTENING A BOLT ON THE PRIMARY CRUSHER WHEN HE FELT A PAIN IN HIS BACK.
EE WAS CHANGING LIGHT BULBS. HE WEN TO STEP OFF THE STEEL FRAME WORK ONTO THE TAIL SECTION GUARD OF 1/4' STONE FEED BELT. THE GUARD GAVE WAY AND HE SLIPPED AND HIS WORK BOOT GOT CAUGHT BETWEEN THE BELT AND THE PULLEY.
1994 · 3 incidents
DRIVING CAT HAUL TRUCK & EXPERIENCED BACK PAIN
IT WAS RAINING AND HE WAS CLEANING OUT ROCKS FROM CRUSHER. HE SLIPPED WHILE GOING DOWN FROM CRUSHER AND TWISTED HIS ANKLE.
ON 1-31-94 AT 8:30 PM TERRY BOYER WAS TIGHTENING#3 CRUSHER AND SLIPPED ON ICE. WHILE TRYING TO STOP HIS FALL HE JAMMED HIS MIDDLE FINGER ON HISLEFT HAND.
1993 · 2 incidents
EMPLOYEE WAS CUTTING A PIECE OF RUBBER WITH A UTILITY KNIFE FOR A SKIRT ON SCALP ON BELT WHEN KNIFE SLIPPED & CUT HIS LEFT LEG
EMPLOYEE WAS WALKING TO POWER HOUSE WHEN SLIPPEDON ICE AND LANDED ON LEFT WRIST.
1992 · 3 incidents
EMPLOYEE WAS WALKING ACROSS PLATFORM AND SLIPPED AND FELL ON ICE LOWER BACK PAIN.
65790SKID LOADER CORNER OF BUCKET HIT ROCK MACHINE STOPPED PULLED BACK MUSCLE
EMPL DRIVING TRUCK. RAILING OF THE INSIDE DOOR PANEL OF TRUCK HIT LEFT KNEE.
1991 · 1 incident
EMPLOYEE STEPPED DOWN FROM LAODER TO MOVE DRILL STEEL AND PULLED MUSCLE IN LOWER BACK.
1990 · 6 incidents
EMPLOYEE WAS DRILLING HIS EIGHTH HOLE OF THE DAY. WHILE STANDING 20 FEET FROM THE RIG DUST BLEW UP FROM THE DRILL, HITTING HIM IN RIGHT EYE. EE WAS WEARING SAFETY GLASSES AT TIME. WIND BLOWING 20 MILES PER HOUR GUST 35 MILES PER HOUR.
HE WAS PULLING THE CORDS ON THE STONE BINS TO RELEASE STONE INTO HIS EUCLID.
EMPLOYEE STEPPED ON A ROCK WHILE TRYING TO FREE LODGED ROCKS FROM JAW CRUSHER.STEPPING DOWN ON ROCK CAUSED RIGHT ANKLE TO TWIST,RESULTING IN A SPRAIN.
EMPLOYEE WAS LIFTING DRILL BIT OUT OF HOLE AND AIR VALVE BLEW OFF OF DRILL STRIKING HIM IN THE KNEE.
EMPLOYEE DRIVING STOCK TRUCK WHEN HE STOPPED WINDOW SHATTERED
MOVING FROM CATWALK TO FRONT OF 988B TO REPAIR ITS LIGHTS WHEN HE SLIPPED AND FELL TO GROUND
1989 · 3 incidents
REMOVING STEEL PLATE FROM CRUSHER AFTER IT FELL I N PINNED HAND BETWEEN THE PLATE AND THER CRUSHER JAW
EE WAS ON VACATION WHEN HE CALLED TO REPORT THIS ACCIDENT THAT HAPPENED 10 DAYS PRIOR. EE CLAIMS TO HAVE BUMPED HIS KNEE ON 980C CAT LOADER LADDER.
REMOVING TOP OF CONE CRUSHER WHEN IT SWUNG AROUND AND SMASHED RIGHT INDEX FINGER.
1988 · 5 incidents
REPLADING OIL IN MACHINE SLIPPED & LANDED ON OIL DRUM.
WHILE UNLOADING SHEET STEEL FROM BOX TRAILER, A SHEET OF STEEL SLIPPED OFF THE FORK TRUCK FORKS HITTING LEFT LEG.
WHEN CUTTING WASHERS OUT OF A RUBBER BELT THE KNIFE SLIPPED CUTTING LEFT HAND. EMPLOYEE WAS SENT TO DOVER GENERAL HOSPITAL AND HIS LEFT HAND REQUIRED FOUR STITCHES.
I NAME WAS DRILLING HOLES IN FACE WHEN HE FELT SOMETHING IN HIS LEFT EYE.
EMPLOYEE WAS OPERATING THE EUCLID WHILE PULLING THE CABLE TO RELEASE THE BIN HE STRAINED HIMSELF
1987 · 9 incidents
EM WAS CLIMBING3DOWN OFF 980 LOADER SLIPPED CATCHING HAND RAIL WITH ONE HAND AND SWUNG INTO LADDER
THE INJURED SLI1PED OFF THE LADDER OF THE HAUL TRUCK AS HE WAS CLIMBING DOWN OFF THE TRUCK.
WHILE WORKING O3 TRUCK DOING MAINTENANCE I.NAME GOT THE HONE STUCK IN A COFFEE CAN WHILE TRYING TO RELEASE IT I.NAME HIT THE TRIGGER THE HONE LOCKED AND SPUN AROUND SPRAYING SAFETY KLEAN INTO THE AREA SOME 2F THE SPRAY GOT INOT I.NAMES EYE
EMPLOYEE WAS DO3NG REPAIR WORK TO A YARD TRUCK.HE WAS UNDER THE TRUCK WHEN RUST AND DIRT FELL INTO HIS EYE.
EMPLOYEE WAS GE7TING OUT OF CAB.HE LOST HIS BALANCE,FALLING ON HIS OUTSTRETCHED LEFT HAND.HE SUFFERED SEVERE PAIN AND SWELLING FROM A DISLOCATED LEFT WRIST.
LARGE ROCK WAS 6OUNCING IN JAWS IN MAIN PRIMARY.TWO MEN WERE LIFTING AND DROPPING ROCKS TO CLEAR.HE PULLED MUSCLE IN LOWER BACK WHILE LIFTING .
EMP WAS CHANGIN1 THE TEETH ON FRONT END LOADER BUCKET, WHEN EMP WAS REMOVING ONT OF THE TEETH, IT STRUCK HIM ON THE RT FOOT, FRACTURING AND LACERATING SMALL TOE. THE BUCKET WAS 3-4 FT OF THE GROUND AND 5EVEL
WHILE OPERATING3SHOVEL SEVERAL ROCKS SLID, ONE HIT GUARD RAIL OF SHOVEL AND ONE LAND IN FRONT WINDOW, STRICKING OPERATOR. HIS LEG WAS PINNED CAUSING A LACERATION OF THE RIGHT LEG ABOVE THE KN EE. 3
I.NAME SLIPPED 2N ICE WHILE LOADING AN EMPTY OXYGEN CYLINDER IN EXCHANGE FOR A FULL OXYGEN CYLINDER THE CYLINDER FELL WHEN I.NAME LOST HIS BALANCE AND THE CYLINDER LANDED ON HIS WRIST
1986 · 6 incidents
EMP WAS GETTING3OUT OF TRUCK, WHILE STEPPING DOWN FROM TRUCK, HE STEPPED ON A CLUMP OF DIRT, SPRAINING HIS RIGHT ANKLE
AT THE TIME THE3ACCIDENT OCCURRED I NAME WAS DRILLING AND I NAME WAS HELPING OUT BYU HANDLING SUCK DUTIES AS GREASING THE TREADS OF THE DRILL RODS AND HANDLING THE BREAKOUT WRENCH. AFTER TALKI NG TO BOTH THEM1 IT APPEARS THAT HE BELIEVE A DRILL ROD HAD BEEN BROKEN OUT. WHEN IN FACT IT HASXX HADNT HE REACHED FOR THE WRENCH AS II NAME HIT THE BREAKOUT CONTROL A SECOND TIME AND HIS RI
I.NAME & I.NAM9 WERE DOING MAIN. TIGHTENING CRUSHER BOLT. I.NAME CAUGHT HIS FINGER BETWEEN WALL & BOLT WRENCH.
I NAME AND II N5ME WERE INSTALLING HOIST CYCLINDER ON EUCLID CYCLINDER CAUGHT ON SHAFT AND RELEASED FAST CAUGHT HIS FINGER BETWEEN CYLINDER AND FRAME.
I.NAME & I.NAME3WERE REPLACING A BRAKE BAND ONT HE DROPBALL. THEY WERE REMOVING THE OLD BAND. I.NAME WAS STANDING ON TRACK WHEN BAND RELEASED I.NAME WAS PULLING HE FELL BACKWARDS HIT THE GRO %**%@ GROUND. 3
I NAME STOPPED 7O PULL SLACK INTO HOSE, THE TORCH TWISTED AND GOT CAUGHT AND BURNED LEFT WRIST. HE WAS WORKING ON WINTER MAINTENANCE.
1985 · 3 incidents
I NAME AND I NAME WERE MOVING CONCRETE BLOCKS USED AS A BERM FROM THE FACE I NAME WAS WORKING THE GROUND AND HAD HOOKED UP A BLOCK HE SIGNALED I NAME TO MOVE THE MACHINE BACK WHEN THE MACHINE MOVED THE BLOCK WAS TURNED I NAME STEPPED BACK AND WENT OFF THE FACE
I NAME SAW THAT AN OWNER OPERATOR \S TAIL GATE WASNT CLOSED ALL THE WAY, HE TRIED TO CLOSE THE TAIL GATE BY HAND AND GOT HIS RIGHT HAND CAUGHT.
WHILE DUMPING A LOAD OF STONE THE HYD HOSE LINE BROKE AND EUCLID BODY CAME BASCK DOWN AND JOLTED I NAME S NECK.
1984 · 6 incidents
WHILE WORKING ON A BATTERY CABLE A SLIVER OF METAL GOT INTO STEVES FINGER AND IT GOT INFECTED
I.NAME TRIED CLEANING ICE OFF 3/8 BELT HEAD SECTION WITH A HAMMER & WAS CAUGHT BETWEEN BELT & HEAD SECTION.
PERFORMING NORMAL DUTIES AS MECHANIC I.NAME LIFTED AND TURNED WHICH RESULTED IN HERNIA.
IT WAS A RAINY DAY AND THE GROUND WAS ALREADY SATURATED. I.NAME WAS WALKING TO WORK AREA WHEN HE SLIPPED AND FELL, HE TRIED TO CATCH HIMSELF AND LANDED ON HIS RIGHT WRIST.
WHILE LIFTING 2 X 2 1/2" STEEL I.NAME SLIPPED ON SYNTRON AND TWISTED BACK
THROWING HYDRAULIC PUMP ONTO SCRAP PILE FROM PICKUP TRUCK