Email me when a new MSHA incident is filed at CR 239 Quarry.
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 21,278 | 0 | 0 | 0.0 |
| 2025 Q3 | 21,080 | 0 | 0 | 0.0 |
| 2025 Q2 | 17,531 | 4 | 0 | 228.2 |
| 2025 Q1 | 17,508 | 5 | 1 | 285.6 |
| 2024 Q4 | 15,943 | 0 | 0 | 0.0 |
| 2024 Q3 | 15,608 | 4 | 0 | 256.3 |
| 2024 Q2 | 13,984 | 0 | 0 | 0.0 |
| 2024 Q1 | 12,614 | 17 | 4 | 1347.7 |
Employee was using an 8-10 lbs. hammer to assist with the removal of a tooth off a loader bucket. A piece of the tooth broke off, roughly 2-3 mm in size, and struck the employee on the back lower side of EE's right leg.
On October 31, 2024, at approximately 2:25 PM miners were positioning a new conveyor on site, two welds on the conveyor snapped and the conveyor folded contacting a miner as EE was in position to put the locking pins in place.
The worker was helping change a roller on the crusher when the roller slipped a tang on the roller caught worker's hand causing a laceration.
Employee guiding wires on a control panel suspended from a boom truck. The control panel tilted knocking the employee to the ground straining his back and shoulder.
Employing was lowering light tower, cable had slack, slipped and cut end off of employee's thumb.
Employee stepped down from rock truck, slipped and jammed knee.
Employee helping carry oxygen/acetylene tank rack and when setting it down pinched finger between rack and rock.