Email me when a new MSHA incident is filed at Caretta #3 Mine.
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 5,465 | 10 | 1 | 1829.8 |
| 2025 Q3 | 1,255 | 0 | 0 | 0.0 |
| 2025 Q2 | 3,902 | 2 | 0 | 512.6 |
| 2025 Q1 | 6,811 | 20 | 6 | 2936.4 |
| 2024 Q4 | 10,820 | 10 | 3 | 924.2 |
| 2024 Q3 | 10,533 | 27 | 6 | 2563.4 |
| 2024 Q2 | 11,202 | 9 | 4 | 803.4 |
| 2024 Q1 | 10,217 | 5 | 0 | 489.4 |
Assisting continuous miner operator cleaning rock and coal material from the top of the miner. A small piece of roof rock fell striking EE on shoulder. The injury sustained was bruising and a small tear in flesh. Mine roof was fully supported in this area. Rock size was about the size of a football.
EE was in the process of assisting other workers build a concrete block stopping. While dumping buckets of plaster into the spray machine vat the spray hose ruptured knocking EE's mining hat & safety glasses off & plaster material entered EE's left eye impairing vision in eye. Eye has been flushed & vision is improving.
Stinger mantrip was located under the #2 beltline in a jack knife position with rock duster attached. EE was attempting to release duster hitch at which time the tongue came loose and struck EE on the right hand.
EE was in the process of repairing a water hose on the miner. The metal lid covering the area of access had been removed and laid aside. EE, while standing alongside the machine lost footing causing them to fall and while falling, they grasped for a hand hold to break their fall, pulled the metal lid down with them, thus striking their right hand against the falling lid.
Employee was in the process of positioning the roof bolting machine to install roof bolts in the first cut taken for the number four (4) to number five (5) crosscut when a small scale of roof rock dislodged from between installed roof bolts, striking Employee on top of head resulting in a neck injury.
Employee stopped personnel carrier along the #3 belt line to mark a bad belt roller to be removed, got off the ride and during checking the roller the ride drifted backwards and struck the employee. It was found that the employee failed to set the park brake on the machine. Employee received fracture in the pelvic area and was sent home for recovery.
EE was in the process of spraying plaster coating onto a stopping located outby spad 422 in the intake on 1st right panel section of the mine. The spray nozzle became clogged and EE attempted to dislodge material from tip at which time plaster material was released from the nozzle striking EE in the eyes.
During beltmove EE was installing hanger chain to belt rail. Chain hoist was attached a link in the chain broke causing the chain hoist to fall onto the EE's right hand resulting in a broken thumb.