Mining Incidents

A-Plant: 54 MSHA citations Metal/Non-Metal

Hallett Materials · Surface
Controlled by CRH PLC
LeGrande, Tama County, IA  ·  Intermittent
MSHA Mine ID: 1302370

A-Plant has $11K in proposed MSHA penalties and $133 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at A-Plant.

Fatalities
0
Total incidents
7
Years on record
2010–2022
Latest incident
Nov 2022
Compliance record
MSHA citations since 2008
54
citations
4
significant & substantial
$10,554
proposed penalties
$10,421
paid to date
99% of proposed penalties paid to date, a $133 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2008
43
inspections on record
566
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 566 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

A-Plant has $11K in proposed MSHA penalties and $133 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$11K
proposed penalties
$11K
current assessed
$10K
paid to date
$133
outstanding
53 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-03-04.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
7.5%
significant & substantial
1.9%
high negligence or reckless
7.5%
reasonably likely or greater
54.7%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 7.5% low, 90.6% moderate, 1.9% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2024-05-01
0%
of limit-tested samples over the exposure limit
19
samples
12
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz8
  • Respirable dust, <.1mg6
  • Nuisance dust, respirable, <1% Qtz4
  • Nuisance dust, total, <1% Qtz1
Show the individual readings (19)
Date Contaminant Concentration Limit Conc / limit Occupation
2024-05-01 Quartz, respirable, >1% Qtz 0.51 1.59 0.32 Cleanup Man
2024-05-01 Respirable dust, <.1mg 0 Truck Driver
2023-03-22 Nuisance dust, respirable, <1% Qtz 0.22 10 0.02 Utility Man
2023-03-22 Nuisance dust, respirable, <1% Qtz 0.22 10 0.02 Cleanup Man
2022-11-02 Nuisance dust, total, <1% Qtz 0.64 10 0.06 Truck Driver
2022-11-02 Respirable dust, <.1mg 0 Truck Driver
2022-11-02 Nuisance dust, respirable, <1% Qtz 0.65 10 0.07 Crusher Oper/Worker
2020-04-01 Respirable dust, <.1mg 0 Truck Driver
2020-04-01 Quartz, respirable, >1% Qtz 0.15 Cleanup Man
2017-06-14 Nuisance dust, respirable, <1% Qtz 0.22 10 0.02 Cleanup Man
2017-06-14 Respirable dust, <.1mg 0 Front-end Loader Operator
2013-04-02 Quartz, respirable, >1% Qtz 0.67 2.11 0.32 Crusher Oper/Worker
2013-04-02 Respirable dust, <.1mg 0 Truck Driver
2013-04-02 Respirable dust, <.1mg 0 Front-end Loader Operator
2013-04-02 Quartz, respirable, >1% Qtz 0.79 1.61 0.49 Crusher Oper/Worker
2010-03-24 Quartz, respirable, >1% Qtz 0.73 1.58 0.46 Truck Driver
2010-03-24 Quartz, respirable, >1% Qtz 1.21 2.31 0.52 Cleanup Man
2010-03-24 Quartz, respirable, >1% Qtz 0.47 1.69 0.28 Truck Driver
2010-03-24 Quartz, respirable, >1% Qtz 0.42 2.67 0.16 Utility Man
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

A-Plant recorded 9.62 reportable injury cases per 100 full-time workers in 2022.

Injury rate, 2022
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
9.62
total case rate
0.00
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 1.78 and the all-US-mining average was 2.12 cases per 100 workers.
In Iowa, metal and nonmetal mining averaged 2.80 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2022 * 9.62 0.00 0.000
2016 * 8.52 0.00 0.000
2015 * 0.00 0.00 0.000
2013 * 9.65 0.00 0.000
2012 * 9.52 9.52 0.000
2011 * 6.38 0.00 0.000
2010 * 5.41 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Hallett Materials 2008 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 0
2025 7
2024 10
2023 9
2022 8
2021 7
2020 8
2019 8
2018 8
2017 8
2016 13
2015 14
2014 15
2013 13
2012 12
2011 18
2010 24
2009 11
2008 14
Source: MSHA quarterly employment and production, updated weekly.

A-Plant sits in Tama County, Iowa, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Tama County, Iowa · Population 16,982
0.0%
Mining share of county employment
$67,955
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 0 0 0
2026 Q1 0 1 0
2025 Q4 1,970 0 0 0.0
2025 Q3 4,568 0 0 0.0
2025 Q2 4,628 0 0 0.0
2025 Q1 3,883 0 0 0.0
2024 Q4 4,639 1 0 215.6
2024 Q3 5,451 0 0 0.0
Show 65 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 4,433 1 0 225.6
2024 Q1 3,922 0 0 0.0
2023 Q4 5,568 2 0 359.2
2023 Q3 3,707 0 0 0.0
2023 Q2 4,618 0 0 0.0
2023 Q1 3,755 5 0 1331.6
2022 Q4 4,694 3 1 639.1
2022 Q3 5,888 0 0 0.0
2022 Q2 5,484 2 0 364.7
2022 Q1 4,731 0 0 0.0
2021 Q4 4,937 0 0 0.0
2021 Q3 4,908 0 0 0.0
2021 Q2 5,514 0 0 0.0
2021 Q1 3,219 0 0 0.0
2020 Q4 3,765 0 0 0.0
2020 Q3 4,931 0 0 0.0
2020 Q2 2,626 0 0 0.0
2020 Q1 2,601 2 0 768.9
2019 Q4 3,563 5 0 1403.3
2019 Q3 5,024 0 0 0.0
2019 Q2 4,759 1 0 210.1
2019 Q1 2,615 0 0 0.0
2018 Q4 3,918 0 0 0.0
2018 Q3 5,548 0 0 0.0
2018 Q2 4,632 1 0 215.9
2018 Q1 3,744 0 0 0.0
2017 Q4 2,939 0 0 0.0
2017 Q3 4,078 0 0 0.0
2017 Q2 2,668 1 0 374.8
2017 Q1 3,076 2 0 650.2
2016 Q4 3,918 0 0 0.0
2016 Q3 6,883 0 0 0.0
2016 Q2 7,066 0 0 0.0
2016 Q1 5,599 3 0 535.8
2015 Q4 7,210 0 0 0.0
2015 Q3 7,695 0 0 0.0
2015 Q2 7,208 0 0 0.0
2015 Q1 3,751 0 0 0.0
2014 Q4 5,018 0 0 0.0
2014 Q3 6,005 0 0 0.0
2014 Q2 2,763 1 0 361.9
2014 Q1 3,864 0 0 0.0
2013 Q4 4,938 0 0 0.0
2013 Q3 6,528 0 0 0.0
2013 Q2 6,240 0 0 0.0
2013 Q1 3,023 1 0 330.8
2012 Q4 5,517 0 0 0.0
2012 Q3 5,535 0 0 0.0
2012 Q2 6,804 0 0 0.0
2012 Q1 3,155 0 0 0.0
2011 Q4 8,378 3 1 358.1
2011 Q3 9,422 0 0 0.0
2011 Q2 10,569 0 0 0.0
2011 Q1 2,987 3 1 1004.4
2010 Q4 9,895 0 0 0.0
2010 Q3 9,985 0 0 0.0
2010 Q2 10,250 0 0 0.0
2010 Q1 6,819 2 0 293.3
2009 Q4 3,616 2 1 553.1
2009 Q3 5,201 0 0 0.0
2009 Q2 5,414 3 0 554.1
2009 Q1 1,719 0 0 0.0
2008 Q4 4,693 0 0 0.0
2008 Q3 7,340 1 0 136.2
2008 Q2 6,592 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

7 on file

2022 · 1 incident

November 2, 2022 IA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Hallett Materials · Struck by... (Not Elsewhere Classified)

EE was assisting on the ground moving a stacker conveyor. The stacker was being moved with a front end loader. The stacker was moved into position and movement had stopped. EE unhooked chain from front end loader. Stacker started to move, edge of mud flap frame came into contact with right leg of EE causing a laceration which needed stitches.

2017 · 1 incident

July 10, 2017 IA · Metal/Non-Metal quality control technician, laboratory technician, laboratory assistant OTHER
Hallett Materials · Absorption of radiations, caustics, toxic and noxious substances

Employee was stung in both hands by wasps when walking down a set of stairs. Employee's hand went past the open end of a handrail and the wasps had a small nest in the end of the handrail. Insect(Nonvenomous) wasp sting.

2016 · 1 incident

August 8, 2016 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Hallett Materials · Fall to the walkway or working surface

Employee stepped back from a piece of machinery and stepped in washout about six inches deep and fell causing fracture right fibula

2013 · 1 incident

September 26, 2013 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Hallett Materials · Struck by... (Not Elsewhere Classified)

Employee was removing flashing from cross conveyor. He unbolted the holder and put up on screen deck. Caught middle finger between holder and screen box laceration had 8 stitches to close and a prescription for antibiotics.

2012 · 1 incident

May 23, 2012 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Hallett Materials · Over-exertion (Not Elsewhere Classified)

On May 23rd, 2012 employee radioed his superintendent that he was having chest pains & trouble breathing. He asked to be taken to the emergency room, which he was. There he was given oral nitroglycerin and morphine. The super stayed until girlfriend arrived. This point on were told by EE this was personal med problem and not WC. On 6/15/12 his attorney told us was work related.

2011 · 1 incident

May 28, 2011 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Hallett Materials · Struck against a moving object

As box was reaching max angle ee felt truck began to lean to drivers side. Immediately began dropping the box. Truck laid over on its driver side door when the box was down to about half way. Hit knee on the door. Went to ER to be checked & returned to work w/o restriction. EE return to DR on 5/31/11 with knee pain. Crutches & immobilizer restriction.

2010 · 1 incident

March 1, 2010 IA · Metal/Non-Metal superintendent HANDLING OF MATERIALS
Hallett Materials · Struck by... (Not Elsewhere Classified)

Employee was struck on the forehead by a board he was using to straighten out a piece of sheet metal.