HE WAS CLOSING HIS TAILGATE AFTER HE HAD DUMPED HIS LOAD OF GRAVEL.
Adamsville Sand & Gravel Co.: 10 MSHA citations Metal/Non-Metal
Adamsville Sand & Gravel Co. has had no fatalities among 16 reportable incidents since 1987. MSHA has proposed $941 in penalties since 2000.
Watch this mine
Email me when a new MSHA incident is filed at Adamsville Sand & Gravel Co..
- Fatalities
- 0
- Total incidents
- 16
- Years on record
- 1987–1995
- Latest incident
- Nov 1995
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Adamsville Sand & Gravel Co. has $941 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.- Adamsville Sand & Gravel Inc 1950 to present
| Year | Employees |
|---|---|
| 2001 | 6 |
| 2000 | 6 |
| 1999 | 7 |
| 1998 | 11 |
| 1997 | 12 |
| 1996 | 19 |
| 1995 | 19 |
| 1994 | 16 |
| 1993 | 16 |
| 1992 | 19 |
| 1991 | 21 |
| 1990 | 17 |
| 1989 | 16 |
| 1988 | 16 |
| 1987 | 17 |
| 1986 | 19 |
| 1985 | 24 |
| 1984 | 17 |
| 1983 | 10 |
Adamsville Sand & Gravel Co. sits in McNairy County, Tennessee, where the Census mining category is 0.5% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000; earlier incidents are counted but not rate-adjusted, though reported hours reach back to 1983. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2001 Q2 | 2,575 | 0 | 0 | 0.0 |
| 2001 Q1 | 3,090 | 6 | 2 | 1941.7 |
| 2000 Q4 | 3,948 | 1 | 0 | 253.3 |
| 2000 Q3 | 4,296 | 0 | 0 | 0.0 |
| 2000 Q2 | 3,219 | 3 | 0 | 932.0 |
| 2000 Q1 | 2,009 | 0 | 0 | 0.0 |
Reportable incidents
16 on file1995 · 2 incidents
EE WAS CLEANING OUT FROM UNDER THE SCREENING PLANT CONVEYOR BELT HE BENT OVER TO PICKUP SOMETHINGWHEN HE RAISED UP HE HIT HIS HAND ON THE CONVEYOR & CUT THE TOP OF HIS HEAD
Show 14 earlier incidents Hide earlier incidents
1993 · 4 incidents
EE WAS STEAM CLEANING A PRICE OF EQUIPMENT HE REACHED OVER TO PULL THE HOSE AND WHEN HE DID THE SPRAYER WENT ACROSS HIS FOOT, BURNING THE TOP OF THE FOOT AND TOES.
HE WAS GETTING OUT OF HIS TRUCK, HIS FOOT SLIPPED, HE FELL & TWISTED HIS BACK.
EE WAS WELDING ALL DAY HE WORE HE MET WITH EYE SHIELD HOWEVER THAT EVENING HIS EYES STARTED TO BOTHER HIM HE DID NOT KNOW UNTIL THEN THAT HE HAD BURNED HIS EYES.
EMPLOYEE WAS CHANGING A TIRE. HIS MIDDLE FINGER ON HIP RIGHT HAND WAS CAUGHT BETWEEN THE RIM AND HUB CAP.
1992 · 4 incidents
WAS DRIVING A TRUCK IN THE PIT, HIT A BUMP AND CAUGHT HIS WRIST BETWEEN STEERING WHEEL AND HIS LEG.
HE WAS CUTTING A RUBBER BELT FOR CONVEYOR WITH A KNIFE & KNIFE SLIPPED & CUT HIS THUMB
HE REACHED FOR A CHAIN TO HOLD ONTO AT THE SCREENING PLANT TURNED AROUND & A SHARP PAIN HIT HIM IN HIS BACK
HE WAS WORKING ON THE DJB TRUCK HE DRIVES. LIGHTENING HIT THE GROUND BESIDE THE TRUCK. HE WAS STANDING BESIDE TRUCK AND RECEIVED THE SHOCK THROUGH HIS BODY.
1990 · 2 incidents
CONCERNING DATE- EMPLOYEE DID NOT REPORT INJURY UNTIL 9-20-90 WHEN HE WENT TO DOCTOR. EMPLOYEE WAS INSTALLING A DRIVE SHAFT IN MACK TRUCK AND STRAINED HIS BACK.
EMPL INSTALLING NEW BELT ON WASHER-FINGER CAUGHT BETWEEN BELT AND PULLEY.
1987 · 4 incidents
EMPLOYEE WALKED3INTO OFFICE AREA,TRIPPED OVER A PACKAGE ON FLOOR AND FELL INTO COIN COKE MACHINE.
EMPLOYEE WAS US3NG CUTTING TORCH TO CUT OUT BEARING ON CRUSHER. A HOT METAL FRAGMENT FELL INTO LEFT EAR.
EMPL INSTALLING3AIR TANK ON TRUCK HOLDING SAME AND METAL FELL IN HIS EYE.HE WAS LAYING UNDER TRUCK.
EMPL HOLDING RO8 FOR WELDER.LIGHT FROM WELDING MACHINE CAUSED BURNING OF BOTH EYES.EMPL DID THIS JOB ALL DAY.BY NIGHT HE REALIZED THE FLASHING HAD CAUSED SOME PROBLEMS IN HIS EYES.