Mining Incidents

Arnold Stone Inc: 138 MSHA citations Metal/Non-Metal

Arnold Stone Inc · Surface
Controlled by Michael D Arnold
Blum, Hill County, TX  ·  Abandoned
MSHA Mine ID: 4104407

Arnold Stone Inc has $92K in proposed MSHA penalties and $51K outstanding across 18 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Arnold Stone Inc.

Fatalities
0
Total incidents
8
Years on record
2004–2016
Latest incident
May 2016
Compliance record
MSHA citations since 2003
138
citations
47
significant & substantial
$92,004
proposed penalties
$25,677
paid to date
28% of proposed penalties paid to date, a $66,327 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2003
42
inspections on record
716
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 716 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
3
Section 107(a) orders
Most recent order: 2015-08-04.
On record since 2014.
Source: MSHA imminent-danger order records, updated weekly.

Arnold Stone Inc has $92K in proposed MSHA penalties and $51K outstanding across 18 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$92K
proposed penalties
$77K
current assessed
$26K
paid to date
$51K
outstanding
134 assessments are final orders; 18 contested dockets.
Of $69K in penalties contested before the Commission, $54K was upheld in final decisions.
As of the most recent assessment on 2016-04-12.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
35.1%
significant & substantial
11.9%
high negligence or reckless
35.1%
reasonably likely or greater
50.7%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 17.2% low, 70.9% moderate, 11.9% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
70 citations taken to the federal commission · 51% of citations on record
  • Settled 54 · 77%
  • Stood as issued 14 · 20%
  • Vacated or withdrawn 2 · 3%
88%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 32 decided S&S contests · industry: 79%
22%
Penalty reduction in decided contests
$69K proposed, $54K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2016-09-07.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2016-0540 Prevail Miller 2017 $21K → $18K
CENT 2016-0043 Settlement Simonton 2016 $20K → $16K
CENT 2016-0042 Settlement Simonton 2016 $14K → $7K
CENT 2009-619M Settlement Moran 2012 $4K → $4K
CENT 2016-0365 Default Lesnick 2016 $4K → $4K
CENT 2011-342M Dismissal Lesnick 2011 $1K → $851
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2012-12-19, 13 years ago
0%
of limit-tested samples over the exposure limit
9
samples
8
limit-tested
Most sampled contaminants
  • Nuisance dust, respirable, <1% Qtz8
  • Respirable dust, <.1mg1
Show the individual readings (9)
Date Contaminant Concentration Limit Conc / limit Occupation
2012-12-19 Nuisance dust, respirable, <1% Qtz 0.35 10 0.04 Front-end Loader Operator
2012-12-19 Nuisance dust, respirable, <1% Qtz 0.31 10 0.03 Laborer, Bullgang
2012-12-19 Nuisance dust, respirable, <1% Qtz 1.02 10 0.10 Front-end Loader Operator
2010-01-06 Nuisance dust, respirable, <1% Qtz 0.18 10 0.02 Bobcat Operator
2010-01-06 Nuisance dust, respirable, <1% Qtz 0.39 10 0.04 Stone Polisher/Cutter
2010-01-06 Nuisance dust, respirable, <1% Qtz 0.19 10 0.02 Bobcat Operator
2009-05-07 Nuisance dust, respirable, <1% Qtz 0.18 10 0.02 Bobcat Operator
2009-05-07 Respirable dust, <.1mg 0 Cleanup Man
2006-05-16 Nuisance dust, respirable, <1% Qtz 0.2 10 0.02 Drill Operator, Rotary Air
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Arnold Stone Inc recorded 0.00 reportable injury cases per 100 full-time workers in 2015.

Injury rate, 2015
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 2.26 and the all-US-mining average was 2.72 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 2.22 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2015 * 0.00 0.00 0.000
2014 * 6.38 0.00 0.000
2013 * 0.00 0.00 0.000
2012 * 0.00 0.00 0.000
2011 * 0.00 0.00 0.000
2009 * 0.00 0.00 0.000
2008 * 0.00 0.00 0.000
2007 * 2.05 2.05 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Arnold Stone Inc 2003 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2016 10
2015 16
2014 20
2013 21
2012 21
2011 18
2010 13
2009 14
2008 35
2007 53
2006 58
2005 42
2004 32
2003 20
Source: MSHA quarterly employment and production, updated weekly.

Arnold Stone Inc sits in Hill County, Texas, where the Census mining category is 2.1% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Hill County, Texas · Population 36,664
2.1%
Mining share of county employment
$63,147
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2016 Q2 1,875 2 1 1066.7
2016 Q1 2,443 6 5 2456.0
2015 Q4 3,755 0 0 0.0
2015 Q3 5,544 16 5 2886.0
2015 Q2 7,188 0 0 0.0
2015 Q1 6,391 0 0 0.0
2014 Q4 7,387 7 4 947.6
2014 Q3 9,019 0 0 0.0
Show 46 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2014 Q2 7,419 8 2 1078.3
2014 Q1 7,545 2 1 265.1
2013 Q4 6,652 0 0 0.0
2013 Q3 8,255 0 0 0.0
2013 Q2 10,010 4 2 399.6
2013 Q1 8,571 0 0 0.0
2012 Q4 6,039 3 0 496.8
2012 Q3 7,761 3 1 386.5
2012 Q2 9,931 0 0 0.0
2012 Q1 9,725 0 0 0.0
2011 Q4 9,550 0 0 0.0
2011 Q3 10,571 4 1 378.4
2011 Q2 6,723 0 0 0.0
2011 Q1 4,049 0 0 0.0
2010 Q4 2,727 6 4 2200.2
2010 Q3 4,412 0 0 0.0
2010 Q2 6,085 4 2 657.4
2010 Q1 5,598 6 1 1071.8
2009 Q4 5,196 0 0 0.0
2009 Q3 4,637 0 0 0.0
2009 Q2 4,951 10 2 2019.8
2009 Q1 9,403 0 0 0.0
2008 Q4 12,965 4 0 308.5
2008 Q3 15,216 2 1 131.4
2008 Q2 20,439 0 0 0.0
2008 Q1 19,075 0 0 0.0
2007 Q4 22,371 5 3 223.5
2007 Q3 26,795 11 3 410.5
2007 Q2 25,547 1 0 39.1
2007 Q1 22,947 0 0 0.0
2006 Q4 28,064 0 0 0.0
2006 Q3 30,791 0 0 0.0
2006 Q2 28,312 16 5 565.1
2006 Q1 27,253 0 0 0.0
2005 Q4 26,257 5 2 190.4
2005 Q3 27,037 0 0 0.0
2005 Q2 25,822 0 0 0.0
2005 Q1 16,942 0 0 0.0
2004 Q4 18,058 1 0 55.4
2004 Q3 23,200 1 1 43.1
2004 Q2 19,018 0 0 0.0
2004 Q1 14,541 6 0 412.6
2003 Q4 12,812 0 0 0.0
2003 Q3 13,361 0 0 0.0
2003 Q2 13,969 4 0 286.3
2003 Q1 10,872 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

8 on file

2016 · 1 incident

May 11, 2016 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Arnold Stone Inc · Struck by... (Not Elsewhere Classified)

Personnel had just returned to work after lunch break, an EE seemed agitated, apparently due to domestic dispute with family member, who is not EE of ASI. At lunch without prompting conversation or any provocation, EE began assaulting weaker EE. IE was immediately taken to ER. Other EE was arrested and taken to jail. Other EE was also immediately terminated.

2014 · 1 incident

May 7, 2014 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Arnold Stone Inc · Caught in, under or between (Not Elsewhere Classified)

When working on the 332 skid steer attachment arm, EE was removing the mounting pins. The head slipped, pinching his left, ring finger. It cut his finger and his glove sufficiently to need stitches.

2007 · 1 incident

March 16, 2007 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Arnold Stone Inc · Struck by... (Not Elsewhere Classified)

EE was operating the Thin Veneer saw; a rock got stuck in the saw blade; he was pushing it out of the way when his finger got caught between the rock and the saw blade; his left ring finger was cut off at the first knuckle.

2006 · 2 incidents

May 26, 2006 TX · Metal/Non-Metal stone finishing and sizing personnel, stone/rock cut/polish/saw operator, splitter, cutter, trimmer HANDLING OF MATERIALS
Arnold Stone Inc · Struck by... (Not Elsewhere Classified)

Employee was lining up stone slab to make a cut with the saw when end of slab rock broke off, falling on ee's foot. Stone struck employee just behind the steel toe plate.

April 17, 2006 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Arnold Stone Inc · Caught in, under or between a moving and a stationary object

Loading 30lb brick of rockinto metal bin and impacted finger with edge of bin with the force of rock in his hands to cause a cut requiring 8 stitches.

2005 · 1 incident

September 30, 2005 TX · Metal/Non-Metal training specialist MACHINERY
Arnold Stone Inc · Struck by falling object

EE was standing in the millblock milling location cleaning & plateing area to reload. 6" slab shifted and fell approx. 2 ft before contact then continued on and pinned his leg to stacking rack. Other EE and Another EE removed the piece rock and ambulance was called.

2004 · 2 incidents

September 30, 2004 TX · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Arnold Stone Inc · Fall from machine

EE climbed on top of quarry saw to help in moving saw loader bumped saw approx. 1-2 mph. ee jumped to the ground capprot 6' and fell to his knee. when i responded to incident to employee refused medical treatment.

March 11, 2004 TX · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Arnold Stone Inc · Over-exertion in lifting objects

Employee was moving excess stone from saw area & tried to pick up a boulder about 100- 120 lbs without asking fellow workers for assistance. Appears to have pulled a muscle in his middle back area. Does not appear to be a permanent injury.