AusTex Aggregates LLC has $28K in proposed MSHA penalties and $5K outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at AusTex Aggregates LLC.
Fatalities
0
Total incidents
1
Years on record
2021
Latest incident
Jul 2021
Compliance record
MSHA citations since 2018
102
citations
31
significant & substantial
$27,625
proposed penalties
$22,376
paid to date
81% of proposed penalties paid to date, a $5,249 gap.
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 272 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
AusTex Aggregates LLC has $28K in proposed MSHA penalties and $5K outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$28K
proposed penalties
$28K
current assessed
$22K
paid to date
$5K
outstanding
101 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-03-26.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2020-02-25, 6 years ago
3
samples
0
limit-tested
Most sampled contaminants
Respirable dust, <.1mg3
Show the individual readings (3)
Date
Contaminant
Concentration
Limit
Conc / limit
Occupation
2020-02-25
Respirable dust, <.1mg
0
Front-end Loader Operator
2020-02-25
Respirable dust, <.1mg
0
Front-end Loader Operator
2020-02-25
Respirable dust, <.1mg
0
Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
AusTex Aggregates LLC recorded 0.00 reportable injury cases per 100 full-time workers in 2024.
Injury rate, 2024
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 1.77 and the all-US-mining average was 2.08 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 1.49 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2025
5
2024
7
2023
3
2022
2
2021
5
2020
5
2019
5
2018
3
2017
3
Source: MSHA quarterly employment and production, updated weekly.
AusTex Aggregates LLC sits in Williamson County, Texas, where the Census mining category is 0.3% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Williamson County, Texas · Population 643,889
0.3%
Mining share of county employment
$108,309
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
EE has had back problems for a while, so we assume EE just re-injured the old injury by getting off the loader ladder. EE was also doing quite a bit of shoveling dirt, so we have eliminated that from EE's job responsibilities, along with requiring EE to use all steps on the loader and not jumping from the 2nd to last step.