Auxvasse South Quarry Metal/Non-Metal

While scooping a bucket of stemming rock EE's knee bent a little sideways and gave out and made a loud pop. EE sprained EE's right knee.

Employee moving steel, pinched middle ring finger. Bruised finger and resulted in blood build up behind nail. Middle ring finger subungual hematoma was drained (blood drained from under finger nail), three day work restriction.

Prepping plant for production. Released a discharge gate and caught hand in gate. Cut/Abrasion to hand resulting in 3 stitches.

Helping grind and something (dust or irritant) got behind safety equipment and irritated eye. Classified as Right eye irritation/abrasion.

Employee removing drain plug from machine, leveraged self for additional force and bruised right chest rib. Diagnoses was Right Chest Contusion.

While in man lift, employee caused lift to bump him into beam, bruising chest

Brushed hand on excavator track and cut right 4th finger on chert or track pad. 4 sutures

Repairing conveyor belt, cranking on ratchet hoist, hoist failed, EE lost balance and fell backwards landing on tailbone and right hand.

Exiting dump truck, wind gust blew door and struck hand.

EE pinched his hand in the door resulting in a laceration.

Stepped on rock, twisted left knee.

Employee aggravated pre-existing knee injury (hockey injury). When applying pressure to raise up, knee popped.

Moving steel plate, plate slipped and pinched end of finger, resulting in rupture of skin approx. 1/4".

Stepped out of truck and stepped on rock and twisted ankle.

Moving oil barrel, strained back.

Reparing primary crusher, strained back while lifting part/componet.

Employee working on conveyor belt, hand pinched in v-belt drive.

Picking up shims to a water pump during repair, shim cut left ring finger.

Employee was tarping equipment prior to move, tarp strap broke, employee lost balance and fell.

EMPLOYEE ATTEMPTED TO LIFT STEEL DOOR TO INSTALL ON CRUSHER AND STRAINED BACK. NOTIFIED OF ACCIDENT / STRAIN ON 8/11/05.

Employee was cutting flashing with box cutter. It slipped and cut right hand.

EMPLOYEE WAS ASSISTING WITH THE CUTTING OF TIMBERS, ONE TIMBER SHIFTED & MOVED WHILE RELOCATING ANOTHER TIMBER, EE'S ARM WAS STRUCK & BROKE.

Employee using a grinder, slipped and cut left leg (thigh).

EE WAS USING A PIPE TO EXTEND A WRENCH, WRENCH EXTENSION BROKE, PIPE STRUCK TOE.

EE WAS INSTALLING BELT ON SECONDARY CRUSHER. PINCHED PINKY FINGER BETWEEN BELT AND PULLEY.

EMPLOYEE WENT TO LIFT DRILL STEEL, FELT PAIN IN BACK.

EMPLOYEE WAS REPAIRING CONVEYOR BELT, KNIFE SLIPPED AND CUT THUMB.

EE WAS CLEANING OUT SECONDARY CRUSHER THAT HAD PLUGGED UP. ROTOR ROLLED AND PINCHED RIGHT FOOT.

EMPLOYEE SLIPPED WHILE IN THE BED OF MECHANICS TRUCK, FELL AND LANDED ON PIECE OF STEEL, LACERATION ON LEFT PALM.

EE WAS CHANGING STEEL ON DRILL. STEEL SLIPPED AND STRUCK RIGHT ARM.

EMPLOYEE WAS DRIVING A STOCKPILE TRUCK AND ATTEMPTED TO CLIMB A GRADE IN TOO HIGH GEAR. THE TRUCK DIED & HE LOST HIS BRAKES.

EE WAS TRIPPING TAILGATE ON DRUMP TRUCK AND LEVER CAME DOWN AND BUSTED HIS UPPER LIP OPERA.

EE WAS STANDING LOOKING INTO THE DUMP BED AT THESTOCKPILE TRUCK WITH ARMS OUTSTRETCHED, HE FELT SOMETHING GIVE IN HIS RIGHT SHOULDER

EE WAS HELPING CLEAN THE SCREENS ON CRUSHER AS HE STEPPED AWAY FROM THE WORK AREA HE TWISTED HIS LEFT KNEE.

EMPLOYEE WAS HELPING TO CHANGE THE FLASHING ON THE DOUBLE IMPELLER WHEN HE NOTICED HE HAD BROKEN OUT IN A RASH. SUPERVISOR TOLD HIM TO GO HOME-HE WEN THOME TOOK A SHOWER & WENT ON TO THE HOSPI TAL FOR TREATMENT.THE GENERAL CAUSE OF THE RASH WAS UNDETERMINED UPON TREATMENT FROM THE EMERGENCY ROOM.

EMPLOYEE WAS REMOVING COVER FROM SPOUT ON A BARRWELL FOR MAINTENANCE. HIS FINGER SLIPED ACROSS THE ALUMINUM COVER AND CUT IT.

EE WAS USING AN EXPLOSIVES STAINLESS STEEL KNIFE TO OPEN A CASE OF EXPLOSIVES. THE KNIFE SLIPPED AND CAUSED A SMALL PUNCTURE WOUND ON HIS LEFT LEG.

THHE CARELESSNESS OF ONE EMPLOYEE, HE BACKED HIS EUCLID INTO THE EMPLOYEE INJURED, (AGAINST THE DRIVERS DOOR) THE CARELESS EMPLOYEE WAS TERMINATED.

EMPLOYEE WAS HOLDING STEEL THAT WAS BEING WELDED& GOT BURNS FROM FLASH OF WELDER.

EMPLOYEE WAS SWINGING A HAMMER - THE EMPLOYEE LIFTED THE HAMMER OVERHEAD WITHOUT CHECKING CLEARANCE & STRUCK HIS HAND ON A CROSSMEMBER.

EMPLOYEE PICKED UP A SMALL ROCK (APPROX. SIZE OF A FOOTBALL) AND THREW INTO FEED HOPPER.

EE WAS LOOSING A NUT ON THE CRUSHER HIS FOOT SLIPPED AND HE BUMPED HIS TAILBONE ON PART OF THE CRUSHER FRAME.

EE WAS REMOVING HOSES FROM WATER PUMP HOT STEAM SHOT OUT AND BURNED EE.

EE WAS MANUALLY PICKING UP SCRAP IRON PIECES. HE PICKED UP A 4 FT PIECE OF I BEAM THAT WAS TOO HEAVY AND STRAINED HIS LOWER BACK.

SWING OUT LADDER BRACKET NOT RETURNED TO PROPER PLACE THUS CREATING A PINCH POINT WHERE THE LADDER CUT FINGER.

EE WENT TO GET INTO HAUL TRUCK, SLIPPED AND TWISTED HIS LEFT KNEE.

EMPLOYEE DROPPED A PRY BAR AND WHEN HE WENT TO RETRIEVE IT HIS FINGER GOT SMASHED BETWEEN THE BAR AND THE FRAME.