BRYANT
Metal/Non-Metal
Kaufman County,
TX
·
Abandoned
MSHA Mine ID: 4101368
BRYANT has $918 in proposed MSHA penalties and $918 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at BRYANT.
- Fatalities
- 0
- Total incidents
- 21
- Years on record
- 1983–1998
- Latest incident
- Oct 1998
Compliance record
MSHA citations since 2000
6
significant & substantial
0% of proposed penalties paid to date, a $918 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 58 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
BRYANT has $918 in proposed MSHA penalties and $918 outstanding across 0 contested dockets.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
9 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2000-10-25.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Quarterly safety rates
ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
| Quarter |
Hours worked |
Citations |
S&S |
Per 1M hrs |
| 2001 Q2 |
1,740 |
0 |
0 |
0.0 |
| 2001 Q1 |
6,960 |
0 |
0 |
0.0 |
| 2000 Q4 |
7,040 |
10 |
6 |
1420.5 |
| 2000 Q3 |
7,460 |
0 |
0 |
0.0 |
| 2000 Q2 |
7,240 |
0 |
0 |
0.0 |
| 2000 Q1 |
7,592 |
0 |
0 |
0.0 |
No fatalities recorded at this mine.
Reportable incidents
21 on file
1998 · 1 incident
October 10, 1998
TX · Metal/Non-Metal
laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman
HANDLING OF MATERIALS
Mc Kinney Crushing Company Inc · Struck against stationary object
EE WAS SETTING A WATER PUMP IN A ROCKY AREA TO PUMP WATER FROM PIT. EE SLIPPED ON A ROCK AND BUMPED HIS RT LEG ON THE FRAME OF THE PUMP. EE DID NOT REPORT THIS UNTIL THE FOLLOWING 10-13-98, WH EN HE GOT AN INFECTION IN HIS LEG. THERE WERE NONOTICABLE CUTS OR OPEN SORES ON LEG, ONLY BRUISEING.
1995 · 3 incidents
Mc Kinney Crushing Company Inc · Over-exertion (Not Elsewhere Classified)
LOADING FERTILIZER FROM TRAILER TO THE TRUCK, SLIPPED & TWISTED HIS ANKLE.
Mc Kinney Crushing Company Inc · Struck against a moving object
MISJUDGED TURNING DISTANCE, ROLLED DOWN SIDE OF PIT. HIT HEAD ON A SUPPORT & CAAUSED STITCHES, BRUISES CAUSED FROM SEAT BELT.
Mc Kinney Crushing Company Inc · Caught in, under or between (Not Elsewhere Classified)
EE WAS CLEANING MUD OFF A PULLEY WITH A STEEL ROD, WHILE CONVEYOR WAS RUNNING. THE BELT GRABBED THE ROD, PULLED HIS LEFT FOREARM INTO THE GUARD, CUTTING HIS LEFT FOREARM.
1992 · 3 incidents
DRIVING A PIN INTO THE TRACKS ON A DOZER WHEN A PIECE OF METAL SHEENED OFF THE PIN HITTING EE IN THE EYEBROW ABOVE HIS RT EYE
March 23, 1992
TX · Metal/Non-Metal
warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator
HANDTOOLS (NONPOWERED)
Mc Kinney Crushing Company Inc · Struck by... (Not Elsewhere Classified)
85061S HOLDING A CORNER OF A BOX BLADE OF A TRACTOR WHILE I.NAME WAS USING A 6 LB SLEDGE HAMMER TO STRAIGHTEN THE CUTTING EDGE. I.NAME SWUNG THE HAMMER, MISSED THE CUTTING EDGE, COMING 180 DEG 95520HITTING HIM IN THE FACE BELOW HIS EYE.
January 14, 1992
TX · Metal/Non-Metal
warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator
HANDTOOLS (NONPOWERED)
Mc Kinney Crushing Company Inc · Over-exertion (Not Elsewhere Classified)
85061S USING A BAR TO PRY A ROCK LOOSE TO GET IT DOWN IN THE JAW. THE BAR SLIPPED BENDING HIS WRIST BACKWARDS CAUSING A SPRAIN.
1986 · 2 incidents
WAS GETTING OFF3OF LADDER WHEN HE STUMBLED AND FELL
HE WAS GETTING 2UT OF PIT TRUCK AND JUMPED,FRACTURING RIGHT ANKLE.
1985 · 5 incidents
September 28, 1985
TX · Metal/Non-Metal
haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver
HANDLING OF MATERIALS
Mc Kinney Crushing Company Inc · Struck by... (Not Elsewhere Classified)
EMPLOYEE WAS HELPING TAKE A RADIATOR OUT OF A TRUCK AND WHEN HE WENT TO SET IT DOWN IT SLIPPED ON HIS FINGERS. THE MIDDLE & INDEX FINGERS. HE HAD NO LOST TIME.
September 3, 1985
TX · Metal/Non-Metal
maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech
HANDLING OF MATERIALS
Mc Kinney Crushing Company Inc · Over-exertion in lifting objects
LIFTING TIRE FOR MOUNT ON PIT TRUCK-CAUSED SEVERE PAIN IN BACK.
Mc Kinney Crushing Company Inc · Struck by... (Not Elsewhere Classified)
WAS SHOOTING SHOT OF POWDER ANDWAS IN THE ENDUMP FOR PROTECTION AND A CLOD OF DIRT (MUD) GLANCED OFF OF BED OF ENDUMP AND WENT THROUGH THE DOOR OF ENDDUMP AND HIT HIS ANKLE.
June 7, 1985
TX · Metal/Non-Metal
drill helper
MACHINERY
Mc Kinney Crushing Company Inc · Caught in, under or between two or more moving objects
OPERATOR WAS MOVING THE DRILL OVER TO THE TRUCK TO PUT FUEL INTO THE DRILL. I.NAME WAS STANDING BETWEEN THE DRILL AND THE TRUCK, THE OPERATOR DID NOT SEE HIM AND MASHED HIM BETWEEN THE TRUCK AND THE DRILL, CAUSING BRUISES ON THE UPPER & LOWER ABDOMEN AND BACK.
Mc Kinney Crushing Company Inc · Over-exertion in lifting objects
WAS PICKING UP KELLEY TO HELP PUT ON DRILL & HURT HIS BACK.
1984 · 5 incidents
November 1, 1984
TX · Metal/Non-Metal
greaser, grease man, oiler, lube man, dragline oiler
POWERED HAULAGE
Mc Kinney Crushing Company Inc · Caught in, under or between (Not Elsewhere Classified)
HE WAS GREASING GEAR BOX AND HIS COTTON GLOVE GOT CAUGHT IN THE BELT. END OF MIDDLE FINGER WAS CUT OFF ON HIS LEFT HAND.
July 9, 1984
TX · Metal/Non-Metal
maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech
POWERED HAULAGE
Mc Kinney Crushing Company Inc · Caught in, under or between a moving and a stationary object
HE WAS USING A 2 X 4 TO CLEAN THE MUD OFF THE TAIL PULLEY ON A CONVEYOR BELT. THE BOARD WAS CAUGHT AND JERKED IT UP PINNING HIS HAND AGAINST THE CONVEYOR FRAME
Mc Kinney Crushing Company Inc · Struck by... (Not Elsewhere Classified)
HE WAS TRYING TO FREE A ROCK LODGED IN THE JAW OF THE CRUSHER. HE WAS USING A SLEDGE HAMMER TO TRY AND BREAK THE ROCK WHEN IT BOUNCED OFF OF THE ROCK AND HIT HIM ON THE LEG.
April 17, 1984
TX · Metal/Non-Metal
mechanic helper
MACHINERY
HAD BEEN WELDING WHEN FINISHED HE WAS CLEANING SLACK FROM THE WELD WITH A CHIPPING HAMMER AND A PIECE OF THE SLACK HIT HIM IN THE EYE.
SHARPENING ROCK BITS AND WHEN GRINDER HIT THE BIT A PIECE OF IT FLEW OFF ANDINTO HIS EYE.
1983 · 2 incidents
November 9, 1983
TX · Metal/Non-Metal
maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech
FIRE
Mc Kinney Crushing Company Inc · Contact with hot objects or substances
EMP WAS ON CRUSHER CUTTING TORCH WHEN TORCH FLASHED & CAUGHT ON FIRE. BURNED RIGHT SIDE OF FACE EYELID AND BROW. FIRST DEGREE BURN TO FACE & EYE, DR PRESCRIBED OINTMENT AND AN EYE PATCH
HE WAS WELDING ANDHAD WELDED A BEAD AND WAS USING A CHIPPING HAMMER TO CLEAN THE BEAD OFF WHEN A SMALL PIECE OF SLAG STUCK IN HIS RIGHT EYE
For insurers, brokers, and safety consultants
The full compliance file on BRYANT
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and
docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF
with the underlying data as CSV.