Mining Incidents

Burro Minerals Sand Mine: 12 MSHA citations Metal/Non-Metal

Aequor Mgt LLC · Surface
Van Horn, Culberson County, TX  ·  Abandoned
MSHA Mine ID: 4105300

Burro Minerals Sand Mine has $2K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Burro Minerals Sand Mine.

Fatalities
0
Total incidents
3
Years on record
2018–2020
Latest incident
Feb 2020
Compliance record
MSHA citations since 2018
12
citations
2
significant & substantial
$1,652
proposed penalties
$1,579
paid to date
96% of proposed penalties paid to date, a $73 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2018
9
inspections on record
98
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 98 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Burro Minerals Sand Mine has $2K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2K
proposed penalties
$2K
current assessed
$2K
paid to date
$0
outstanding
12 assessments are final orders; 1 contested dockets.
Of $191 in penalties contested before the Commission, $118 was upheld in final decisions.
As of the most recent assessment on 2020-05-18.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
16.7%
significant & substantial
25.0%
high negligence or reckless
16.7%
reasonably likely or greater
33.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 16.7% low, 58.3% moderate, 25.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
1 citations taken to the federal commission · 8% of citations on record
  • Settled 1 · 100%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 1 decided S&S contests · industry: 79%
38%
Penalty reduction in decided contests
$191 proposed, $118 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2018-04-05.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2018-0251 Settlement Gill 2018 $191 → $118
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Burro Minerals Sand Mine recorded 0.00 reportable injury cases per 100 full-time workers in 2019.

Injury rate, 2019
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.94 and the all-US-mining average was 2.32 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 1.84 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2019 * 0.00 0.00 0.000
2018 3.28 1.64 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Aequor Mgt LLC 2017 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2021 27
2020 17
2019 31
2018 68
2017 47
Source: MSHA quarterly employment and production, updated weekly.

Burro Minerals Sand Mine sits in Culberson County, Texas, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Culberson County, Texas · Population 2,181
0.0%
Mining share of county employment
$42,672
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2021 Q1 3,089 0 0 0.0
2020 Q3 711 0 0 0.0
2020 Q2 2,646 2 0 755.9
2020 Q1 10,602 0 0 0.0
2019 Q4 24,097 2 0 83.0
2019 Q3 22,845 0 0 0.0
2019 Q2 12,493 2 0 160.1
2019 Q1 23,687 4 1 168.9
Show 5 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2018 Q4 33,665 0 0 0.0
2018 Q3 31,123 0 0 0.0
2018 Q2 29,493 0 0 0.0
2018 Q1 27,650 1 1 36.2
2017 Q4 19,263 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

3 on file

2020 · 1 incident

February 1, 2020 TX · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver OTHER
Aequor Mgt LLC · Caught in, under or between a moving and a stationary object

EE's index finger was cut in a pinch point which caused EE to receive 17 stitches. EE stated a gust of wind made the platform lift faster than anticipated and EE didn't have enough time to move EE's hand.

2018 · 2 incidents

July 16, 2018 TX · Metal/Non-Metal dryer operator, kiln operator, dry plant operator, fluid operator, bed dryer operator FALLING/SLIDING/ROLLING MATERIALS
Aequor Mgt LLC · Struck by falling object

Two employees were working at the dry plant and were going to grease equipment on an elevated platform. The first employee went up and dropped a rope down to tie the grease gun to. The second employee started up before the grease gun had made it to the top. The grease gun became untied and fell striking the second employees nose.

January 13, 2018 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Aequor Mgt LLC · Struck by falling object

Employee was wearing gloves and getting tools out of a toolbox. The toolbox lid closed on the employees left index finger. Once the employee removed employees glove employee had a small cut that required stitches and a finger splint. The employee was released back to work with light duty restrictions.