Mining Incidents

C G Tanner & Son Inc: 15 MSHA citations Metal/Non-Metal

C G Tanner & Son Inc · Surface
Controlled by Clayton W Tanner
Gloversville, Fulton County, NY  ·  Abandoned
MSHA Mine ID: 3003611

C G Tanner & Son Inc has $2K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at C G Tanner & Son Inc.

Fatalities
0
Total incidents
0
Years on record
Latest incident
Compliance record
MSHA citations since 2007
15
citations
2
significant & substantial
$1,562
proposed penalties
$1,562
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2007
22
inspections on record
182
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 182 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

C G Tanner & Son Inc has $2K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2K
proposed penalties
$2K
current assessed
$2K
paid to date
$0
outstanding
15 assessments are final orders; 1 contested dockets.
Of $300 in penalties contested before the Commission, $200 was upheld in final decisions.
As of the most recent assessment on 2017-05-17.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
13.3%
significant & substantial
0.0%
high negligence or reckless
13.3%
reasonably likely or greater
53.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 60.0% low, 40.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
3 citations taken to the federal commission · 20% of citations on record
  • Settled 2 · 67%
  • Vacated or withdrawn 1 · 33%
0%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 1 decided S&S contests · industry: 79%
33%
Penalty reduction in decided contests
$300 proposed, $200 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2008-01-16.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
YORK 2008-87M Settlement Lesnick 2008 $300 → $200
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2015-05-12, 11 years ago
3
samples
0
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg3
Show the individual readings (3)
Date Contaminant Concentration Limit Conc / limit Occupation
2015-05-12 Respirable dust, <.1mg 0 Crusher Oper/Worker
2010-05-19 Respirable dust, <.1mg 0 Front-end Loader Operator
2010-05-19 Respirable dust, <.1mg 0 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. C G Tanner & Son Inc 2007 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2021 2
2020 2
2019 2
2018 2
2017 2
2016 2
2015 2
2013 2
2012 2
2011 2
2010 2
2009 2
2008 2
2007 2
Source: MSHA quarterly employment and production, updated weekly.

C G Tanner & Son Inc sits in Fulton County, New York, where the Census mining category is 0.5% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Fulton County, New York · Population 52,787
0.5%
Mining share of county employment
$62,615
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2021 Q4 58 0 0 0.0
2021 Q3 600 0 0 0.0
2020 Q4 23 0 0 0.0
2020 Q3 881 0 0 0.0
2020 Q2 24 0 0 0.0
2019 Q3 736 0 0 0.0
2019 Q2 431 0 0 0.0
2018 Q4 351 0 0 0.0
Show 34 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2018 Q3 676 0 0 0.0
2018 Q2 465 0 0 0.0
2017 Q4 510 0 0 0.0
2017 Q3 735 0 0 0.0
2017 Q2 510 1 1 1960.8
2016 Q4 248 0 0 0.0
2016 Q3 750 2 0 2666.7
2016 Q2 676 0 0 0.0
2015 Q4 475 0 0 0.0
2015 Q3 757 0 0 0.0
2015 Q2 546 0 0 0.0
2013 Q3 441 0 0 0.0
2013 Q2 569 0 0 0.0
2012 Q4 525 0 0 0.0
2012 Q3 869 0 0 0.0
2012 Q2 703 0 0 0.0
2012 Q1 0 0 0
2011 Q4 608 1 0 1644.7
2011 Q3 832 0 0 0.0
2011 Q2 626 0 0 0.0
2011 Q1 0 0 0
2010 Q4 532 0 0 0.0
2010 Q3 792 0 0 0.0
2010 Q2 639 1 0 1564.9
2010 Q1 0 0 0
2009 Q4 285 0 0 0.0
2009 Q3 670 0 0 0.0
2009 Q2 520 1 0 1923.1
2009 Q1 0 0 0
2008 Q4 180 0 0 0.0
2008 Q3 606 0 0 0.0
2008 Q2 553 0 0 0.0
2008 Q1 0 0 0
2007 Q4 708 9 1 12711.9

No reportable incidents on file.

MSHA has no recorded reportable accidents for this mine in the current dataset. New reports appear here within a week of being filed.