EE WAS REPAIRING BELT. CLIMBING DOWN OFF BELT, EE SLIPPED AND HIT HIS KNEE.
CHESTNUT RIDGE SAND: 18 MSHA citations Metal/Non-Metal
CHESTNUT RIDGE SAND has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at CHESTNUT RIDGE SAND.
- Fatalities
- 0
- Total incidents
- 11
- Years on record
- 1993–2004
- Latest incident
- Oct 2004
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.CHESTNUT RIDGE SAND has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2001-04-05, 25 years ago
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.- Quartz, respirable, >1% Qtz11 over
- Respirable dust, <.1mg2
Show the individual readings (3)
| Date | Contaminant | Concentration | Limit | Conc / limit | Occupation |
|---|---|---|---|---|---|
| 2001-04-05 | Quartz, respirable, >1% Qtz | 0.37 | 0.37 | 1.00 | Front-end Loader Operator |
| 2001-04-05 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2001-04-05 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker |
CHESTNUT RIDGE SAND recorded 0.00 reportable injury cases per 100 full-time workers in 2005.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2005 * | 0.00 | 0.00 | 0.000 |
| 2004 * | 5.94 | 0.00 | 0.000 |
| 2003 * | 22.27 | 16.70 | 0.000 |
| 2002 * | 0.00 | 0.00 | 0.000 |
| 2001 * | 0.00 | 0.00 | 0.000 |
| 2000 * | 29.43 | 14.72 | 0.000 |
- Chestnut Ridge Sand/Div Haines & Kibblehouse Inc 1989 to present
| Year | Employees |
|---|---|
| 2005 | 14 |
| 2004 | 14 |
| 2003 | 19 |
| 2002 | 15 |
| 2001 | 17 |
| 2000 | 13 |
CHESTNUT RIDGE SAND sits in Monroe County, Pennsylvania, where the Census mining category is 0.2% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2005 Q4 | 5,729 | 0 | 0 | 0.0 |
| 2005 Q3 | 7,664 | 0 | 0 | 0.0 |
| 2005 Q2 | 8,101 | 0 | 0 | 0.0 |
| 2005 Q1 | 8,311 | 4 | 0 | 481.3 |
| 2004 Q4 | 8,886 | 0 | 0 | 0.0 |
| 2004 Q3 | 9,747 | 0 | 0 | 0.0 |
| 2004 Q2 | 8,287 | 0 | 0 | 0.0 |
| 2004 Q1 | 6,777 | 1 | 0 | 147.6 |
Show 16 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2003 Q4 | 9,314 | 0 | 0 | 0.0 |
| 2003 Q3 | 9,052 | 0 | 0 | 0.0 |
| 2003 Q2 | 10,154 | 0 | 0 | 0.0 |
| 2003 Q1 | 7,399 | 0 | 0 | 0.0 |
| 2002 Q4 | 10,962 | 5 | 1 | 456.1 |
| 2002 Q3 | 9,166 | 0 | 0 | 0.0 |
| 2002 Q2 | 7,209 | 0 | 0 | 0.0 |
| 2002 Q1 | 6,641 | 0 | 0 | 0.0 |
| 2001 Q4 | 9,437 | 0 | 0 | 0.0 |
| 2001 Q3 | 8,624 | 0 | 0 | 0.0 |
| 2001 Q2 | 9,242 | 8 | 3 | 865.6 |
| 2001 Q1 | 5,979 | 0 | 0 | 0.0 |
| 2000 Q4 | 6,672 | 0 | 0 | 0.0 |
| 2000 Q3 | 6,691 | 0 | 0 | 0.0 |
| 2000 Q2 | 8,115 | 0 | 0 | 0.0 |
| 2000 Q1 | 5,703 | 0 | 0 | 0.0 |
Reportable incidents
11 on file2004 · 1 incident
2003 · 4 incidents
SITE CLEARING, PUSHING TREES ONTO PILE. LARGE STUMP AND LOG ROLLED POST SIDE OF BUCKET AND FELL BACKWARDS. LOG END CAME THROUGH WINDSHIELD GLASS, GLASS CAME IN ON OPERATOR.
GETTING INTO TRACK HOE, SLIPPED ON STEP GETTING INTO MACHINE.
EMPLOYEE WAS CHECKING OUT VIBRATIONS IN PUMP. HE PUT ONE HAND ON ELECTRIC VALVE & THE OTHER HAND ON DISCHARGE PIPE.
WORKING ON SEPTIC CONVEYOR. STANDING ON BELT INSTEAD OF LADDER, SLIPPED FELL ABOUT 5'.
2000 · 4 incidents
GREASING BEARINGS ON CRUSHING PLANT, WORKING DOWN CATWALK, BECAUSE OF FREEZING WEATHER AND RAIN HAD SOME BUILD UP ON CATWALK WALKED INTO STEEL PLATE.
CLEANING OFF BELT, GOT OFF BELT WALKING TO ANOTHER SPOT AND SLIPPED ON ICE.
EE WAS CLIMBING DOWN OFF DOUBLE SCREW TO LADDER HAD HAND ON PIECE OF PIPE. PIPE BROKE AND HE FELL TO GROUND ABOUT 15'.
REMOVING FROZEN LUMPS FROM TUNNEL BELT GOT TO CLOSE TO MAGNET RIGHT HAND PINCHED BETWEEN MAGNET AND FROZEN CLUMPS OF SAND.
1998 · 1 incident
EMPLOYEE WAS WLAKING BY PLANT WHILE SOMEONE WAS GRINDING METAL AND HE GOT SLIVER OF METAL IN LEFT EYE.
1993 · 1 incident
EE HAD COMPLETED REPAIRS ON CANICA 105 CRUSHER. AS HE WAS CLOSING THE LID ON THE CRUSHER, HE GOT HIS RING FINGER AND LITTLE FINGER ON HIS RIGHT HAND CAUGHT BETWEEN THE LID AND FRAME OF THE CRU SHER.