citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
113 citations across 1,508 inspection hours.
Source: MSHA inspections data, updated weekly.
Cloverlick #2 has $29K in proposed MSHA penalties and $0 outstanding across 2 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$29K
proposed penalties
$28K
current assessed
$28K
paid to date
$0
outstanding
112 assessments are final orders; 2 contested dockets.
Of $4K in penalties contested before the Commission, $3K was upheld in final decisions.
As of the most recent assessment on 2012-05-15.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘContesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
4citations taken to the federal commission · 4% of citations on record
Settled
4 · 100%
50%
S&S designation survived the contest
ⓘCounts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 4 decided S&S contests · industry: 79%
24%
Penalty reduction in decided contests
$4K proposed, $3K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2011-06-27.
Contested penalties
ⓘA reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
MSHA sampling at Cloverlick #2 shows 93% of 240 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2012-05-18, 14 years ago
93%
within 1.5 mg/m3
240
samples
5.34
dust max (mg/m3)
108 samples taken by MSHA inspectors, 132 by the operator.
Noise
ⓘThe share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Health sampling trend
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Cloverlick #2 recorded 6.10 reportable injury cases per 100 full-time workers in 2012.
Injury rate, 2012
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
6.10
total case rate
6.10
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 3.74 and the all-US-mining average was 2.96 cases per 100 workers.
In Kentucky, coal mining averaged 4.35 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2012 *
6.10
6.10
0.000
2011 *
2.43
2.43
0.000
2010 *
6.99
4.66
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘCoal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year
Employees
Coal produced (tons)
2012
19
56,923
2011
38
181,128
2010
40
172,401
2009
39
72,870
Source: MSHA quarterly employment and production, updated weekly.
Cloverlick #2 sits in Harlan County, Kentucky, where the Census mining category is 4.3% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Harlan County, Kentucky · Population 26,185
4.3%
Mining share of county employment
$37,198
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2012 Q4
0
0
0
2012 Q3
0
0
0
2012 Q2
12,160
1
0
82.2
2012 Q1
20,641
17
3
823.6
2011 Q4
20,668
11
6
532.2
2011 Q3
19,410
6
1
309.1
2011 Q2
21,189
6
0
283.2
2011 Q1
21,176
11
3
519.5
Show 6 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2010 Q4
20,737
11
5
530.5
2010 Q3
22,584
6
0
265.7
2010 Q2
22,000
8
3
363.6
2010 Q1
20,472
7
2
341.9
2009 Q4
21,395
13
4
607.6
2009 Q3
20,147
12
6
595.6
No fatalities recorded at this mine.
Reportable incidents
6 on file
2012 · 1 incident
April 30, 2012KY · Coalbeltman, conveyor man, conveyor belt worker, mobile bridge carrierman, feeder operator, conveyor riderHANDLING OF MATERIALS
EE was in his knees shoveling a belt drive. When he tried to lift a shovel full of material his knee slipped causing him to strain awkwardly which resulted in a suspected hernia.
2011 · 1 incident
August 2, 2011KY · Coalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
Jarisa, Inc. · Caught in, under or between a moving and a stationary object
Employee was trying to install a sharp pin on a stamler feeder the bar he was using kicked back and pinned his right ring finger against the frame of the feeder mashing his right hand ring finger, cutting his finger off from the last knuckle out.
Operator side roof bolter was bolting top when a rock kicked out of rib hitting the operator on his back, knocking him into roof bolter controls. Operator was examined by 2 EMTs on shift, taken to surface then transported to local hospital.
September 7, 2010KY · Coalshuttle car operator, mantrip operator, ramcar operator, rail runner, buggy operatorMACHINERY
Employee was bolting top & drilling a hole when a piece of draw rock fell from the top and hit his arm. The draw rock was 2' x 3' & measured in thickness from 1 1/2" to 3".