operator removed a piece of paper that was caught in blower fan of the heat and a.c. unit. When he removed the paper, the fan started turning, therefore cutting his index finger into two places.
Commissary Surface Job: 13 MSHA citations Coal
James River Coal Service Company
· Surface
Controlled by
James River Coal Company
Slemp,
Perry County,
KY
·
Abandoned
MSHA Mine ID: 1518898
Commissary Surface Job has $7K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Commissary Surface Job.
- Fatalities
- 0
- Total incidents
- 2
- Years on record
- 2008
- Latest incident
- Jun 2008
Compliance record
MSHA citations since 2005
13
citations
3
significant & substantial
$6,930
proposed penalties
$6,930
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2005
9
inspections on record
231
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 231 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Commissary Surface Job has $7K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$7K
proposed penalties
$7K
current assessed
$7K
paid to date
$0
outstanding
13 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2008-07-09.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.23.1%
significant & substantial
0.0%
high negligence or reckless
23.1%
reasonably likely or greater
15.4%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 7.7% low, 92.3% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
MSHA sampling at Commissary Surface Job shows 100% of 22 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2008-07-23, 18 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.100%
within 1.5 mg/m3
22
samples
0.71
dust max (mg/m3)
19 samples taken by MSHA inspectors, 3 by the operator.
Most-sampled occupations
- HIGHLIFT OPERATOR/FRONT END LOADER6
- HIGHWALL DRILL OPERATOR6
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE5
Silica (quartz)
Last sampled: 2007-09-20, 18 years ago15.7
silica avg (%)
1
samples
15.7
silica max (%)
Most-sampled occupations
- HIGHWALL DRILL OPERATOR1
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2007-12-18, 18 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.0%
over PEL
13
samples
Most-sampled occupations
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE4
- BULLDOZER OPERATOR3
- HIGHLIFT OPERATOR/FRONT END LOADER3
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust by year
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2008 | 100% | 8 |
| 2007 | 100% | 10 |
| 2005 | 100% | 4 |
Noise by year
| Year | over PEL | samples |
|---|---|---|
| 2007 | 0% | 10 |
| 2005 | 0% | 3 |
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Commissary Surface Job recorded 10.73 reportable injury cases per 100 full-time workers in 2008.
Injury rate, 2008
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.10.73
total case rate
0.00
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 4.41 and the all-US-mining average was 3.61 cases per 100 workers.
In Kentucky, coal mining averaged 4.87 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
- Blue Diamond Coal Company 2005 to 2008
- James River Coal Service Company 2008 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2008 | 13 | 89,750 |
| 2007 | 9 | 59,596 |
| 2006 | 0 | |
| 2005 | 14 | 67,266 |
Source: MSHA quarterly employment and production, updated weekly.
Commissary Surface Job sits in Perry County, Kentucky, where the Census mining category is 3.3% of county employment.
Local economic context
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.Perry County, Kentucky · Population 27,847
3.3%
Mining share of county employment
$45,261
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.Citations per million employee-hours, as reported to MSHA
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2008 Q4 | 2,961 | 0 | 0 | 0.0 |
| 2008 Q3 | 9,222 | 2 | 1 | 216.9 |
| 2008 Q2 | 12,188 | 0 | 0 | 0.0 |
| 2008 Q1 | 12,917 | 1 | 1 | 77.4 |
| 2007 Q4 | 12,289 | 1 | 0 | 81.4 |
| 2007 Q3 | 6,656 | 3 | 0 | 450.7 |
| 2007 Q2 | 0 | 0 | 0 | |
| 2007 Q1 | 0 | 0 | 0 |
Show 6 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2006 Q4 | 0 | 0 | 0 | |
| 2006 Q3 | 0 | 0 | 0 | |
| 2006 Q2 | 0 | 0 | 0 | |
| 2006 Q1 | 0 | 0 | 0 | |
| 2005 Q4 | 11,680 | 0 | 0 | 0.0 |
| 2005 Q3 | 3,495 | 2 | 0 | 572.2 |
No fatalities recorded at this mine.
Reportable incidents
2 on file2008 · 2 incidents
June 16, 2008
KY · Coal
haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver
POWERED HAULAGE
James River Coal Service Company · Struck by... (Not Elsewhere Classified)
March 7, 2008
KY · Coal
maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech
HANDTOOLS (NONPOWERED)
James River Coal Service Company · Struck by... (Not Elsewhere Classified)
The mechanic was holding a segment bolt with a scerw driver, the screw driver sliped, the bolt caught the glove pulling his finger in with the scew driver.He was taken to the ARH Hospital, he received 9 stiches in his left fore-finger.