Mining Incidents

Job 22: 99 MSHA citations Coal

Controlled by James River Coal Company
Hueysville, Floyd County, KY  ·  Abandoned
MSHA Mine ID: 1518903

Job 22 has $29K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Job 22.

Fatalities
0
Total incidents
1
Years on record
2006
Latest incident
Jun 2006
Compliance record
MSHA citations since 2005
99
citations
37
significant & substantial
$29,290
proposed penalties
$29,290
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2005
18
inspections on record
728
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 728 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Job 22 has $29K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$29K
proposed penalties
$29K
current assessed
$29K
paid to date
$0
outstanding
98 assessments are final orders; 1 contested dockets.
Of $514 in penalties contested before the Commission, $514 was upheld in final decisions.
As of the most recent assessment on 2013-05-02.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
37.8%
significant & substantial
0.0%
high negligence or reckless
37.8%
reasonably likely or greater
9.2%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 12.2% low, 87.8% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
5 citations taken to the federal commission · 5% of citations on record
  • Stood as issued 5 · 100%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 5 decided S&S contests · industry: 79%
0%
Penalty reduction in decided contests
$514 proposed, $514 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2006-08-31.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
KENT 2006-483 Default Lesnick 2007 $514 → $514
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

MSHA sampling at Job 22 shows 100% of 62 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2012-04-09, 14 years ago
100%
within 1.5 mg/m3
62
samples
1.13
dust max (mg/m3)
60 samples taken by MSHA inspectors, 2 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR20
  • HIGHLIFT OPERATOR/FRONT END LOADER12
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE11

Silica (quartz)

Last sampled: 2009-06-18, 17 years ago
13.4
silica avg (%)
2
samples
18.0
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR1
  • HIGHWALL DRILL OPERATOR1

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2012-04-11, 14 years ago
0%
over PEL
29
samples
Most-sampled occupations
  • BULLDOZER OPERATOR8
  • HIGHLIFT OPERATOR/FRONT END LOADER5
  • ROAD GRADER OPERATOR4
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2012 100% 3
2009 100% 22
2008 100% 14
2007 100% 8
2006 100% 14
2005 100% 1
Noise by year
Year over PEL samples
2012 0% 4
2009 0% 12
2008 0% 6
2007 0% 1
2006 0% 6
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Job 22 recorded 0.00 reportable injury cases per 100 full-time workers in 2010.

Injury rate, 2010
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.96 and the all-US-mining average was 3.20 cases per 100 workers.
In Kentucky, coal mining averaged 4.85 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2010 * 0.00 0.00 0.000
2009 * 0.00 0.00 0.000
2008 * 0.00 0.00 0.000
2007 * 0.00 0.00 0.000
2006 * 4.59 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Knott Floyd Land Company 2005 to 2006
  2. Miller Bros Coal LLC 2006 to 2010
  3. Laurel Mountain Resources, LLC 2010 to 2011
  4. James River Coal Service Company 2011 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2013 1 794
2012 6 22,841
2011 5
2010 9
2009 29 148,748
2008 39 304,442
2007 15 234,643
2006 23 241,638
2005 11 36,977
Source: MSHA quarterly employment and production, updated weekly.

Job 22 sits in Floyd County, Kentucky, where the Census mining category is 4.4% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Floyd County, Kentucky · Population 35,342
4.4%
Mining share of county employment
$41,582
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2013 Q3 0 0 0
2013 Q2 1,617 1 0 618.4
2013 Q1 0 0 0
2012 Q4 0 0 0
2012 Q3 632 0 0 0.0
2012 Q2 5,493 4 0 728.2
2012 Q1 1,364 0 0 0.0
2011 Q4 0 1 0
Show 25 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2011 Q3 4,543 0 0 0.0
2011 Q2 2,322 1 0 430.7
2011 Q1 4,943 0 0 0.0
2010 Q4 4,516 0 0 0.0
2010 Q3 5,520 0 0 0.0
2010 Q2 5,687 0 0 0.0
2010 Q1 5,162 0 0 0.0
2009 Q4 5,434 1 0 184.0
2009 Q3 21,073 0 0 0.0
2009 Q2 13,498 17 4 1259.4
2009 Q1 20,945 8 1 382.0
2008 Q4 17,636 0 0 0.0
2008 Q3 18,834 9 5 477.9
2008 Q2 23,919 0 0 0.0
2008 Q1 19,112 2 0 104.6
2007 Q4 10,592 6 2 566.5
2007 Q3 8,909 12 7 1347.0
2007 Q2 8,317 0 0 0.0
2007 Q1 7,444 3 3 403.0
2006 Q4 13,496 0 0 0.0
2006 Q3 13,780 6 6 435.4
2006 Q2 11,742 0 0 0.0
2006 Q1 4,519 4 1 885.2
2005 Q4 1,581 0 0 0.0
2005 Q3 297 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

1 on file

2006 · 1 incident

June 3, 2006 KY · Coal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Knott Floyd Land Company · Struck against stationary object

Cleaning dirt out away from master link to weld and hit finger on broken chain.