Coronet Jewell Prep Plant #2 Coal

Reported on August 5th that an employee had filed a compensable hearing loss claim.

EE was cleaning the shop and was attempting to drag a piece of fabricated pipe across a steel work table. The pipe pivoted catching the ee's left index finger between the pipe and table.

He was dislodging ice from 2" discharge pump by hitting the hose on a concrete barrier when the ice was loosen the hose was uncontrollable, the of hose hit him in the face.

Using a 1/2" electric drill to drill 1-1/2" holes through plywood using a flat wood boring bit. As he was drilling, the bit bound up in the wood causing the drill's handle to twist, bending his right ring & pinky fingers. (NOTE: Drill was NOT equipped with a trigger lock.) He let go of the trigger as soon as he noticed it bind, but couldn't get his hand away fast enough.

The employee was working on the triple deck to replace a bad screen in the discharger end of the bottom deck. The EE was cutting out the huck bolts in the back plate to remove the screen. The EE stated he cut all the bolts out except two. These 2 bolts were left in until a means of securing the plate was in place. 1 bolt did not have a nut & the plate fell on his foot.

Was pulling oxygen bottle on dollie across floor at tipple.

Employee alleges to have contracted Coal Workers Pneumoconiosis while employeed at Jewell Smokeless Coal Corporation. We were informed on 1/24/07 that the employee had been diagnosed with the illness at Stage 1/0.

I-Beam was lifted and employee was cleaning dirt off of it. The lifting clamp slipped off and I-beam fell, striking employee on foot.

EMPLOYEE WAS PAINTING I-BEAMS FROM MANLIFT AND WAS BITTEN BY A SPIDER.

EMPLOYEE WAS CUTTING AN I-BEAM APART. AS HE WAS CUTTING THE I-BEAM, IT SHIFTED AND FELL ON EMPLOYEE'S FOOT.

THE EMPLOYEE INJURED HIS NECK DURING AN ALTERCATION AT THE HEAVY EQUIPMENT SHOP, LOST HIS BALANCE AND FELL TO THE GROUND.

EMPLOYEE WAS CARRYING SAE2 CLEANER (70-80 LB) FROM TRUCK TO SILO. WALKWAY WAS NARROW. HE TRIPPED ON ROCK/COAL IN GRATE AND FELL ON SAME LEVEL.

AT THE START OF THE SHIFT, THE PREP PLANT WAS STARTED & AN ATTEMPT WAS MADE TO START THE REFUSE BELTS. THE NO.1 REFUSE BELT SHOWED A HIGH AMPERAGE READING WHEN ATTEMPTING TO START IT, SO THE F OREMAN, PLANT ELECTRICIAN & A MECHANIC WENT TO THE NO.1 TAILPIECE & FOUND THAT SOME BOLTS HAD BROKEN OUT OF THE FEEDER FRO THE BELT AND ALLOWED REFUSE FINES TO ACCUMULATE AROUND THE BELT TAIL

BUILT UP REFUSE ON CABLE CALMP ALLOWED EE TO LOSE HIS FOOTING AND FALL APPROX. 10 FEET.

THE EE WAS IN THE PROCESS OF REPAIRING A VIBRATOR ON THE NO.1 CLEAN COAL BIN. AS HE WAS POSITIONING A PORTABLE WORK PLATFORM INTO PLACE TO BEGIN WORK, A SLEDGE HAMMER THAT HAD BEEN LEFT ON THE WORK PLATFORM FELL AND STRUCK HIM ON THE RIGHT SIDE OF HIS FOREHEAD. THE EE RETURNED TO WORK ON HIS NEXT SCHEDULED WORK SHIFT.

EE STEPPED OUT OF THE MACK TRUCK HE HAD BEEN DRIVING AND AS HE STEPPED OUT OF THE TRUCK ONTO THE STEP HIS KNEE TWISTED UNDER HIM. EE CONTINUED TO WORK AND DID NOT GO TO A DR UNTIL 10-7-98, AND WAS PLACED ON RESTRICTED WORK DUTY AT THAT TIME

EE DISCOVERED A PLUGGED CHUTE ON THE NO5 REFUSE BELT. REFUSE HAD SPILLED ONTO THE GROUND BESIDE THE NO 6 REFUSE BELT TAIL PIECE. THE EE WALKED UPON THE PLANT OPERATOR TO STOP THE BELT & AS THE BELT STOPPED, HE PLACED HIS HAND ON THE BEAMAREA WHERE THE BRAKE ARM FOR THE BRAKE ON THE NO5 BELT. AS THE BRAKE SET, THE EE'S FINGERS WERE CAUGHT BETWEEN THE BRAKE ARM & THE BRAKE ARM

THE EE WAS WORKING AT THE AERIAL TRAM LOADOUT WHEN THE AHUL ROPE FOR THE AERIAL TRAM BROKE. THIS ALLOWED SOME OF THE HAUL CARS TO RETURN TO THE LOADOUT AT A GREATER THAN NORMAL SPEED. IN AN EF FORT TO QUICKLY EVACUATE THE AREA. THE EE JUMPEDSEVERAL STEPS AND FELL, CAUSING BRUISES RESULTING IN SORENESS. THE EE HAS MISSED WORK SINCE THE ACCIDENT.

EMPLOYEE POSSIBLE HEART ATTACK.

THE EMPLOYEE WAS TIGHTENING A SET COLLAR ON A BEARING. THE INJURY OCCURRED WHILE THE EMPLOYEE WAS USING A HAMMER. THE EMPLOYEE ISN'T SURE IF THE INJURY OCCURRED DUE TO BEING STRUCK WITH THE HA MMER OR DUE TO THE WRENCH SLIPPING. THE INJURY IS MEDICALLY REPORTABLE DUE TO THE EMPLOYEE RECEIVIGN STITCHES TO CLOSE THE WOUND.

THE EMPLOYEE STRAINED HIS BACK WHILE CARRYING AND POURING BAGS OF CEMENT INTO A MIXER.

EE ALLEGES TO HAVE CONTRACTED COAL WORKERS' PNEUMOCONIOSIS WHILE EMPLOYED ATJEWELL SMOKELESS COAL CORPORATION. CLAIM WAS SETTLED AND APPROVED ON 5-1--94 AND RECEIVED BY MGMT. ON 5-16-94.

ON 12-20-93 THE EMPLOYEE STRAINED HIS BACK WHILELIFTING A PIECE OF METAL FROM A TRUCK BED. THE EMPLOYEE CONTINUED HIS NORMAL WORK ACTIVITY UNTIL 2-24-94 WHEN HE WAS PLACED ON LIGHT DUTY BY HI S ATTENDING PHYSICIAN AT WHICH TIME THE ACCIDENTBECAME REPORTABLE.

THE EMPLOYEE WAS LOADING ROCK WITH A 980 ENDLOADER WHEN A ROCK CAME OUT OF THE BUCKET CAUSING THE ENDLOADER TO BOUNCE,INJURING EMPLOYEE'S BACK.THE EMPLOYEE CONTINUED TO WORK FROM 10-13-93 TO,0 7-11-94 WHEN HE BEGAN MISSING WORK.PLEASE LIST THIS INJURY WITH THE 1993 DATA.

THE EMPLOYEE WAS IN THE PROCESS OF LIFTING A TUB WHICH CONTAINED COAL SAMPLES FOR ANALYSIS WHEN HE EXPERIENCED A SHARP PAIN IN HIS LEFT SHOULDER.

54736YEE ALLEGES TO HAVE CONTRACTED COAL WORKERS PNEUMOCONIOSIS WHILE WORKING AT THIS FACILITY OFFICIAL NOTIFICATION WAS RECEIVED BY MANAGEMENT ON AUGUST 7 1992

54736YEE ALLEGED TO HAVE CONTRACTED COAL WORKERS PNEUMOCONIOSIS WHILE WORKING AT THIS FACILITY OFFICIAL NOTIFICATION WAS RECEIVED BY MANAGEMENT ON AUGUST 7 1992

EE AND OTHER WERE ENGAGED IN THE DISMANTLING OF A HIGHWAY GUARD SCREEN, CUTTING WITH A TORCH THE CONNECTION BOLTS. THE METAL SCREEN TILTED AND THE TWO MEN FELL TO THE GROUND-A DISTANCE OF ABOU T 12 FEET.

EE & OTHER WERE ENGAGED IN THE DISMANTLING OF A HIGHWAY GUARD SCREEN, CUTTING WITH A TORCH THE CONNECTION BOLTS. THE METAL SCREEN TILTED AND THE TWO MEN FELL TO THE GROUND-A DISTANCE FO ABOUT 12 FEET.

EE WAS REPLACING MOTOR MOUNTS ON THE NO. 2 SHAKER AND WAS REPLACING THE BELTS. AS HE WAS TURNING THE SHIEVE WITH A PIPE WRENCH. THE COUNTER WEIGHT INSIDE THE SHAKER SHIFTED REVERSING THE SHIEV E AND CATCHING HIS HAND ON THE CORNER OF A PERMANENT GUARD. LOCK OUT AND OTHER SAFETY PRECAUTIONS WERE IN USE AT THE TIME OF THE ACCIDENT. STITFCHES WERE REQUIRED.

TWO LOADED AND ONE EMPTY RAILROAD CARS HAD GOTTEN AWAY FROM SHAKEOUT AND INJURED HAD BOARDED ONE OF THE CARS IN AN ATTEMPT OT STOP THEM. WHEN RUNAWAYS MADE CONTACT WITH LOADED CARS BELOW THE P LANT, INJURED EMPLOYEE WAS THROWN AGAINST END OF CARS STIKING HIS LEFT SIDE.

TO HAVE CONTRACTED COAL WORKERS PNEUMOCONIOSIS WHILEWORKING FOR JEWELL SMOKELESS COAL CORP. OFFICIAL NOTIFICATION FROM THE INDUSTRIAL COMMISSION OF VIRGINIA WAS RECEIVED BY MANAGEMENT ON JULY 15, 1992.

BLOWING LOOSE DIRT FROM BANK WITH AIR HOSE ROCK & DIRT FELL LOOSE HITTING HIM IN BACK.

THE EMPLOYEE WAS COMING OUT OF THE SLURRY PUMP HOUSE. HE DIDN'T BEND OVER ENOUGH TO WALK UNDER THE FLUMES THAT RUNS BETWEEN THE THICKENERS, STRIKING HIS HEAD AGAINST THE BOTTOM OF IT.

EE WAS CROSSING UNDER THE HEAD END OF HILLSIDE BELT OVER SOME FROZEN SPILLAGE ON THE CATWALK WHEN HE SLIPPED AND HURT HIS LEFT SIDE. BASE UPON DOCTOR'S REPORT RECEIVED 2-22-91, IT WAS DETERMIN ED THIS ACCIDENT IS REPORTABLE. MANAGEMENT WAS NOT MADE AWARE OF THE REPORTABILITY OF THIS ACCDIENT UNTIL A DOCTOR'S REPORT WAS RECEIVED ON 2-22-91.

THE INJURED EMLOYEE AND A CO-WORKER HAD TAKEN THE COUNTER-WEIGHT OFF THE DRIVE SHAFT AND STOOD IT UPRIGHT IN THE FLOOR UP NEXT TO THE LAUNDRY. THEY THEN HOOKED UP THE COUNTER-WEIGHT THEY WERE GOING TO PUT BACK ANDSTARTED LIFTING IT UP WITH A CHAIN FALL. WHILE THEY WERE LIFTING IT UP TO STRUCK THE ONE THEY HAD TAKEN OFF, CAUSING IT TO TURN OVER WHICH STRUCK THE EMPLOYEE'S LOWER SH

INJ REPORTED THAT UPON ARRIVING HOME AFTER WORK ON 12/26 RIGHT EYE WAS BOTHERING HIM. HE FOUND SMALL PARTICLE IN EYE BUT COULD NOT REMOVE IT. ON 12/27 EYE WASH MACHINE PREP PLANT LAB WAS USED BUT DID NOT REMOVE PARTILE. HE WAS SENT TO DR. HE WAS WEARING GLASSES AT TIME OF ACCIDENT.

ATTEMPTING TO REMOVE IMPELLER NUT FROM THE END OF THE SHAFT OF A NEW DRIVE UNIT FOR THE NO. 1 CLARIDIER PUMP, WHEN THE UNIT ROLLED OVER CATCHING HIS FINGER BETWEEN THE NUT AND THE PUMP FRAME. THE UNIT WAS BEING RAISED BY A ONE TON CHAIN FALL STITCHES WERE REQUIRED FOR HIS FINGER. EE LOST NO TIME UNTIL 12-17-90.

THE INJURED EMPLOYEE AND A CO-WORKER WERE DROPPING OUT SIX LOADED RAILROAD CARS BEFORE DAY LIGHT. THE CARS CAME UNCOUPLED AND INJURED AND CO-WORKER COULD NOT SEE THIS. WHEN THE CARS RECOUPLED THE IMPACET CAUSED THE INJURED TO BE THROWN AGAINST THE CAR, HURTING HIS BACK.

USING CHAIN FALL TO PULL A PIPE 14"DIA X 15'LONG UP THROUGH TO NEXT FLOOR.THE CLIP THE CHAIN FALL WAS HANGING ON BROKE AND THE PIPE FELL AND STRUCK THE INJ LEG.MISSED NEXT 2 SHIFTS.NOT DETERM INED UNTIL 12-13-90 THAT EMPL WAS OFF DUE TO INJ

EE WAS STEPPING OVER A PIECE OF 12 INCH PLASTIC PIPE RUNNING ALONG THE NO. 2 SLATE DRYER WHEN HE TRIPPED AND FELL. THE EE LOST NO TIME UNTIL 9-19-90 IT WAS THOUGHT BY MINE MANAGEMENT UNTIL 12- 13-90. THAT THE EE WAS OFF FOR PERSONAL REASON ON 9-19-90 MANAGEMENT DETERMINED ON 12-13-90 THAT THE ACCIDENT WAS REPORTABLE.

EMPLOYEE WAS GREASING BEND ROLLERS ON TUBE BELT WHEN HE ALLEGES TO HAVE BEEN INJURED. HE SAID HE GOT DIZZY WHEN HE RAISED UP AND FELL FORWARD INTO THE BELT. HE SAID IT CAUGHT HIS LEFT ARM AND PULLED IT INTO THE BELT, AND WHEN THE BELT PULLED HIM INTO IT HIM ARM HIT THE SAFETY PULL ROPE AND SHUT THE BELT OFF.

EMPL PUTTING IN MECHANICAL SPLICE ON MOUNTAIN REFUSE BELT.USED A COME-ALONG TO PULL BELT TOGETHER TO GET SPLICE MADE.RELEASED TENSION ON BELT,COME-ALONG JUMPED A TOOTH.HANDLE CAME DOWN,WEDGED HAND BETWEEN COME-ALONG AND HANDLE.

EMPLOYEE STATED HE INJURED HIS BACK WHILE EITHER LIFTING OUT OR PUTTING BACK IN PLACE THE SCREEN OR WEARPLATE. THE ACCIDENT OCCURRED ON THE 2ND FLOOR WHERE VC48'S AREA LOCATED.

MECHANIC STATED AFTER COMPLETING A WELDING JOB HIS EYE WAS HURTING.HE THOUGHT HE HAD PROBABLY RECEIVED A WELDING FLASH AS HE WAS WELDING IN AN OVERHEAD POSITION.05-01-90-EMPLOYEE STATED OBJECT WAS NOT EMBEDDED AND PRESCRIPTION WAS NOT ISSUEOR FILLED.06-26-90 RECEIVED DOCTOR'S REPORT THAN AN EMBEDDED AND REMOVED.

THE LOAD OUT CREW HAD PUSHED CARS (RAILROAD) BACK UP THE TRACK AND CLEANED THE TRACKS. THEY WERE DROPPING THE EMPTIES BACK UNDER THE TIPPLE. THE EMPLOYEE HOOKED THE CABLE TO THE CAR HOIST ON THE FRONT OF THE CAR WHILE IT WAS STILL MOVING AND CAUGHT HIS FINGER BETWEEN THE CABLE AND THE RAILROAD CAR.

INJURED HAD STARTED NO.1 BELT UNDER A LOAD AND HAD PEOPLE WORKING AROUND THE TAIL ROLLER. THE BELT WAS ABOUT 1/2 EMPTIED WHEN IT KICKED OFF AND STARTED ROLLING BACK. THE INJUREDRAN BACK TO WAR N THE WORKERS, WHEN HE STRUCK HIS HEAD ON THE BACK OF THE HEADHOUSE CHUTE. EMPLOYEE DID NOT GO TO A DOCTOR UNTIL MARCH 16, 1990, AND WENT TO A CHIROPRACTOR FOR MANIPULATION.

JUST FINISHED MIXING BARRELL OF FLOC IN PROCESS SPILLED SOME ON SHOES AND IN FLOOR, WALKING AND SLIPPED AND FELL,

EMPLOYEE WAS PUTTING BACK A SECTION OF PIPE THAT HAD BEEN REMOVED TO INSTALL A DRUM FOR THE SEPERATOR.THE PIPE HAD BEEN PUT BACK IN PLACE AND ONE END TACK WELDED.AS THE OTHER END OF THE PIPE W AS BEING PULLED IN PLACE,THE TACK WELD BROKE ANDFELL STRIKING THE VICTIM.NOTE: EMPLOYEE DID NOT BEGIN LOSING TIME UNTIL 12-26-89.

INJURED WAS POURING COAL OUT OF 55 GALL DRUM ON PATION FLOOR TO CONE & QUARTER SAMPLE. COAL WAS FROZEN IN BARREL. BARREL SLIPPED ON FORKS OF FORK LIFT BARREL WAS SETTING ON CATCHING INJURED'S MIDDLE FINGER BETWEEN ONE FORK & BARREL.

WORKING ON FROTH CELLS WAS UP ON TOP OF D UNIT B GETTING READY TO PULL IT UP ANOTHER EMP REACHED HIM CHAIN HOIST, CAUSING HIM TO SLIP, DROPPING CHAIN HOIST ON R HAND

CABLE BROKE ON BOOM TRUCK A LOAD WAS BEING PULLED.

INJURED WAS CHANGING BITS ON THE AUGER, AND WAS ATTEMPTING TO DRIVE ONE OFF WHEN A PIECE OF METAL CAME LOOSE AND WENT IN HIS LEFT ARM.

INJURED WAS HELPING DRAIN A 3 INCH WATERLINE SO A LEAK COULD BE REPAIRED. HE STEPPED UPON A METAL BOX TYPE PLATFORM THAT HAD BEEN MADE AND COVERED WITH RUBBER TREAD TO TURN THE WATER OFF WHEN HIS FEET SLIPPED FROM UNDER HIM CAUSING HIM TO FALL AND STRIKE HIS RIBS AGAINST THE PLATFORM. HE LOST NO TIME TIL 7-24-89.

EMPLOYEE WAS CLEANING A MOTOR CONTROL CENTER WITH A SPRAY CLEANER & APPARENTLY HIS HAND CAME IN CONTACT WITH AN ENERGIZED POWER WIRE OR THE SPRAY CLEANER HE WAS USING CAUSED A GROUND BETWEEN T HE ENERGIZED LEAD & THE GROUND WIRE CAUSING AN ELECTRICAL FLASH ARC PRODUCING BURNS TO THE EM0PLOYEES HAND & FACE THE EMPLOYEE FAILED TO ENSURE THE CENTER WAS DEENERGIZED

EMPLOYEE STATED HE BENT OVER TO OPEN HIS DESK DRAWER WHEN HE EXPERIENCED PAIN IN HIS LOWER BACK.THE EMPLOYEE CONTINUED TO WORK UNTIL 01-13-89 BEFORE HE WENT TO A DOCTOR ON THAT DATE.THE PHYSIC AN ISSUED THE EMPLOYEE A PRESCRITION AND HE HAD IT FILLED ON THAT DATE.

EMPLOYEE WAS CROSSING OVER A CATWALK ON TOP OF AERIAL TRAM WHEN HIS FOOT SLIPPED. THE EMPLOYEE CAUGHT HIMSELF AND IN DOING SO STRAINED HIS HAND.

FROZEN COAL WAS COMING OUT OF THE RAILROAD CARS IN CHUNKS AND HAD TO BE BEATEN INTO SMALLER PIECES BEFORE IT WOULD GO THROUGH THE SCREEN AT THE SHAKEOUT. WHILE BEATING OE PIECE, SOME COAL W ENT INTO HIS EYE BEHIND HIS SAFETY GLASSES. EMPLOYEE DID NOT GO TO A DOCTOR UNTL 12-21-88 AT WHICH TIME THE COAL HAD BECOME EMBEDDED IN HIS EYE AND HAD TO BE REMOVED.

EMPLOYEE WAS CLEANING TOP OF CRUSH MIDDS TANK. AS HE TURNED TO BACK DOWN THE LADDER, HIS FOOT SLIPPED CAUSING HIM TO FALL AND HIT HIS MOUTH ON THE HANDRAIL.

EMPLOYEE WAS HELPING INSTALL A POTHEAD ON A 300 H.P. MOTOR THAT HAS A 3" LIQUITITE LINE ENTERING IT. WHILE ALIGNING THE BOLT HOLES TO ATTACH THE LIQUITITE TO THE MOTOR, HE STRAINED HIS BACK. EMPLOYEE DID NOT GO TO A DOCTOR OR LOSE ANY TIME UNTIL 09-23-88.

INJURED WAS REMOVING TORQUE HUB FROM AUGER DRUM THIS PART HAD BEEN REMOVED WITH BVOOM TRUCK & BROUGHT INTO SHOP & HE WAS CARRYING PIECE OF METAL TO BLOCK IT UP WHEN HE CAUGHT HIS FOOT ON PIE CE OF PIPE LAYING IN FLOOR. THIS CAUSED INJURED TO TRIP & PULL MUSCLE IN BACK. EMPL WAS ISSUED PRESCRIPTION FOR PAIN & HAD IT FILLED SAME DAY.

INJ WAS WA>HING PAN LINE UNDERD C BELT AND WA> PULLING HOSE FORM HYDRO SEEDER DOWN CATWALK WHILE WASHING HOSE GOT HUNG ON CATWALK WHILE HE WA> PULLILNG CAUSING HIM TO STRAIN HI BACK EMP DID NOT GO TO A DR. UNTIL 7-30-88. NOTIFIED MANAGE. ON 8-1-88 APRESXCRIP WAS ISSUED BY DR. ON 7-30-88 , FILED BY INJ.

EMP STATED STRAINED HIS BACK REACHING FOR CONTROLS ON CAT HAULER OR WA> JOLTED WHIEL OPERATING THAT PC OF EQUIP. DID NOIT GO TO A DOCTOR UNTIL 7-25-88 DID NOT REPORT IT TO MANAG. UNTIL 7-26 -88 APRESCRIP. WA> ISSUED BY DR. AND FILLED BY EMP

EMPL USING BAR TO SLIDE HOPPER UNDER SEPARATOR TUB WHEN HE FELT PAIN IN HIS BACK.LOST TIME BEGAN 7-11-88.EMPL DID REC RX AND HAD IT FILLED.

INJURED PICKED UP A FULL BAG OF FLOC TO MIX A TANK FULL AND STRAINED HIS BACK.

INJURED STATED HE HAD DROPPED SOME RAILROAD CAR "EMPTIES" TO THE TIPPLE. HE HAD GOTTEN OFF OF A CAR AND WAS CHECKING THEM. THERE WAS DEW ON THE RAILS AND HIS FOOT SLIPPED FROM THE RAIL.

INJURED STEPPED UP ON THE BED OF THE BOOM TRUCK ONTO A CRIB BLOCK. CRIB BLOCK WAS ROUNDED ON THE BOTTOM AND HAD SOME GREASE ON IT, CAUSING INJURED TO SLIP AND FALL HURTING HIS LEFT SHOULDER A ND HIP. NOTE: EMPLOYEE VISITED CHIROPRACTOR ON /5-07-88; MANAGEMENT WAS NOT MADE AWARE OF THE REPORTABILITY OF THIS ACCIDENT UNTIL DR'S REPORT WAS RECEIVED ON 07-27-88.

INJURED WAS REP5ACING LOWER BODY SECTION ON A CYCLONE. THESE SECTIONS ARE HEAVY AND YOU HAVE TO GET IN AN AWKWARD POSITION TO INSTALL THEM.

HE WAS ON 6TH F5OOR OF PLANT TO WIRE UP A MOTOR TO #1A SYSTEM SEPARATOR WHICH HAD JUST HAD THE DRUM REPLACED.THE HANDRAILS AROUND STEPS AT MIDDS CYCLONE HAD TO BE REMOVED TO GET DRUM INTO PLAC E.BELTING HAD B9EN PLACED ON THE FLOOR IN THE AREA TO KEEP THE DRUM FROM CATCHING ON GRATING AS IT WAS BEING PUT INTO PLACE.THE EMPLOYEE SLIPPED ON THE BELTING AND FELL OFF SIDE OF STEPS WHER

HE WAS REMOVING3THE BOTTOM FRAME FROM DANIELS ERFUSE VIBRATOR HE HAD A COME-A-LONG HOOKED TO FRAME PULLING IT OUT FROM UNDER THE VIBRATOR THE HOOK ON THE CABLE CAME LOOSE & STRUCK HIM IN THE F ACE 3

EMPL HOLDING PL5TE IN PLACE FOR WELDER TO TACK WHEN DROPS FROM WELD WENT DOWN INTO GLOVE AND BURNED HIS HAND.LOST TIME BEGAN 6-27-87.

EE STRAINED BAC5 WHILE LIFTING COME-ALONG OVERHEAD.

EMPL SLIDING PI1E ACROSS FLOOR TOWARDS DOOR TO BE THROWN OUT.BENT OVER WHILE DOING THIS.HIT HEAD ON METAL FLUME LINE WHILE BENT OVER.

EMP WAS POSITIO3ING TRUCK RAMPS IN FRONT OF W ELDING TRUCK

INJURED WAS CLO8ING DOOR ON RAILROAD CAR AND SHAKER WAS RUNNING. A SMALL FRAGMENT OF METAL FELL IN RIGHT EYE.

REPLACING JACK 2N DOOR AT LOADOUT WHEN JACK SLIPPED AND CAUGHT FINGER BETWEEN DOOR AND JACK.

INJURED REPORTE8 HE STRAINED HIS BACK WHILE REMOVING SCREENS FROM #2 PRE-WET SCREEN

INJURED STATED 2E WAS GOING UP STEPS IN FRONT OF #1 PETERSON FILTER WHEN HE GOT THE METATARSAL ON HIS BOOT CAUGHT UNDER STEP CAUSING HIM TO TWIST HIS BACK

INJURED WAS RID3NG BOOM TRUCK TO SHOP TO EAT LUNCH IN GETTING OUT OF CAB HE STEPPED ON SLICK SPOT ON GROUND CAUSING HIS FEET TO SLIDE HE CAUGHT HOLD OF TRUCK CAB TO PREVENT FALLING HE FELT A S SHARP PAIN IN L9FT RIB CAGE

THREE MEN WERE 8ISMANTLING AN OLD DENVER FILTER INJURD HAD CUT AND REMOVED 6 IN PIPE FORM BOTTOM OF THE FLUME HE PROCEEDED TO BUT ANOTHER 6 IN PIPE UNDERNEATH THE FILTER WHILE IN THIS WORK POSITION FUME B9OKE LOOSE AND S TRUCK EMP ON LEFT LEG FLUME WAS A 16X18, 90 DEGREE 6 ABOUT 42 IN LONG AND FULL OF MAGNETITE APPROX WEIGHT 550 TO 650 POUNDS

MOVING PIPE IN SHOP WHEN HE STEPPED ON A PLATE. PLATE MOVED AND CAUSED HIM TO STRAIN HIS BACK.

EMPLOYEE STRAINED HIS NECK WHILE PUSHING A FLEXIBLE HOSE TO HOOK IT ONTO A PUMP.

EMPLOYEE WAS GOING DOWN STEPS IN THE PREPARATION PLANT. HE SLIPPED AND TRIED TO CATCH HIMSELF ON GUARD RAILS.

INJURED WAS ATTEMPTING TO ADJUST SCRAPPERS ON FILTER WHEN HAND SLIPPED CATCHING MIDDLE FINGER BETWEEN FILTER TUB AND SECTORS.

CHECKING SCREEN IN SLATE DRYER. HAND SLIPPE ON SCREEN CUTTING HAND THROUGH GLOVE.

INJURED SAID HE WAS PUSHING ON HANDLE OF PIPE WRENCH WITH HIS FOOT. HIS FOOT SLIPPED OFF OF WRENCH. WHEN HIS FOOT CAME OFF OF WRENCH HE WAS THROWN OFF BALANCE AND PULLED A LIGAMENT IN RIGHT L EG.

EMPLOYEE WAS RELEASING BRAKE FOOT SLIPPED FELL AND HIT SIDE ON DRAWHEAD HEAD OF RAILROAD

EMP RECEIVED A HARD JAR WHEN THE TRUCK HE WAS DRIVING DROPPED OFF THE ROAD INTO A DITCH

INJURED STATED HE WAS STEPPING FROM TRUCK TO STEPS THAT GO TO CATWALK UNDER SLATE BIN. HIS FOOT SLIPPED & HE FLL ON CATWALK LANDING ON HIS SIDE. INJURED DID NOT HTINK HE WAS HURT & FINISHED T HE SHIFT. THE NEXT DAY HE WENT TOT THE DOCTOR & FOUND HE HAD 4 BROKEN RIBS.

EMPLOYEE STATED HE USED THE RESTROOM AND WHEN HE FLUSHED THE COMMODE THE TANK TOP FELL OFF. THE TOP BROKE AND HIT INJURED ON THE LEG. FIVE STITCHES WERE REQUIRED TO CLOSE THE CUT ON HIS LEG.

ON PLATFORM RELEASING HAND BRAKE.BRAKE RELEASED SUDDENLY,CAUSING INJ TO FALL BACKWARD HITTING UPPER ARM AGAINST SHARP CORNER OF R.R.CAR TOP.

WHILE PULLING METAL FROM A RACK ONE END CAME LOOSE FIRST ALLOWING OTHER END TO CATCH HIS HAND

EMP WAS USING CLAMP TO LIFT METAL ON TRUCK CLAMP SLIPPED AND CAUGHT HAND BETWEN TRUCK BED AND METAL

EMP WAS USING HOIST TO REMOVE COVER FROM CMI DRYYER HOOK ON HOIST CAME LOOSE AND HOIST FELL STRIKING EMP ON LEFT LEG AND ANKLE

THE INJURED AND A CO WORKER WERE LOADING SOME 8IN CHANNEL ABOUT 10FT LONG AT 0730AM LATER AT 0800AM THEY LIFTED AN OXYGEN TANK IN THE TIPPLE AT 0830AM THE INJURED TOLD HIS CO WORKER HE WAS GOI NG TO THE DOCTOR ABOUT HIS BACK

INJURED WAS LIFTING DRYER BASKET UP AFTER DRYER SCREEN IN SO HOIST COULD BE USED. HURT HIS BACK.

EMPLOYEE WAS WASHING DOWN WITH WATER HOSE. PRESSSURE ON HOSE GOT HIM OFF BALANCE AND HE PUT HIS HAND OUT TO KEEP FROM FALLING . HE LAID HAND ON RAIL AND THE WHEELS OF A TRAM LOAD OUT CAR RAN OVER HAND.

WILSON AND OTHER EMP WERE GETTING THE GUARD IN PLACE AND IT SLIPPED AND FELL ON LLOYD WILSON HITTING HIS ARM AND LEFT LEG

THE INJURED EE & A CO-WORKER WERE UNLOADING EMPTY TANKS OUT OF A WELDING TRUCK. THE ACETYLENE TANK INJURED EE HAD STARTED TO FALL TO THE GORUND & HE TRIED TO CATCH IT. THE SUDDEN WEIGHT OF T HE TANK CAUSED THE STRAINED BACK.

THE INJURED EMPLOYEE AND A CO-WORKER WERE PREPARING TO REPLACE A 24INX24IN FLUME THEY HAD CONNECTED THEIR TORCHES AND THE INJURED WAS GETTING READY TO START CUTTING AS HE WAS LIGHTING THE TORC H THE FLAME WENT UP A HOLE IN HIS GLOVE