Mining Incidents

CRUSHER #2: 69 MSHA citations Metal/Non-Metal

Controlled by Bryan Barthelmess
Worland, Hot Springs County, WY  ·  Abandoned
MSHA Mine ID: 4801574

CRUSHER #2 has $11K in proposed MSHA penalties and $0 outstanding across 2 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at CRUSHER #2.

Fatalities
0
Total incidents
11
Years on record
2001–2022
Latest incident
Feb 2022
Compliance record
MSHA citations since 2002
69
citations
28
significant & substantial
$10,655
proposed penalties
$10,655
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2002
50
inspections on record
762
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 762 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

CRUSHER #2 has $11K in proposed MSHA penalties and $0 outstanding across 2 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$11K
proposed penalties
$11K
current assessed
$11K
paid to date
$0
outstanding
67 assessments are final orders; 2 contested dockets.
Of $218 in penalties contested before the Commission, $218 was upheld in final decisions.
As of the most recent assessment on 2023-05-02.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
41.2%
significant & substantial
10.4%
high negligence or reckless
40.3%
reasonably likely or greater
70.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 10.4% low, 79.1% moderate, 10.4% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
2 citations taken to the federal commission · 3% of citations on record
  • Settled 1 · 50%
  • Stood as issued 1 · 50%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 1 decided S&S contests · industry: 79%
0%
Penalty reduction in decided contests
$218 proposed, $218 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2018-11-21.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2019-0083 Dismissal McCarthy 2019 $118 → $118
WEST 2012-1203M Settlement Lesnick 2013 $100 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2019-11-18, 6 years ago
15%
of limit-tested samples over the exposure limit
28
samples
13
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz212 over
  • Cristobalite, respirable4
  • Respirable dust, <.1mg3
Show the individual readings (28)
Date Contaminant Concentration Limit Conc / limit Occupation
2019-02-26 Quartz, respirable, >1% Qtz 0.97 0.64 1.52 Crusher Oper/Worker
2015-04-28 Quartz, respirable, >1% Qtz 0.85 0.6 1.42 Laborer, Bullgang
2019-11-18 Quartz, respirable, >1% Qtz 0 Laborer, Bullgang
2019-11-18 Cristobalite, respirable 0.18 Dry Screen Plant Operator
2019-11-18 Quartz, respirable, >1% Qtz 0.18 Dry Screen Plant Operator
2019-11-18 Cristobalite, respirable 0 Crusher Oper/Worker
2019-11-18 Quartz, respirable, >1% Qtz 0 Crusher Oper/Worker
2019-11-18 Quartz, respirable, >1% Qtz 0.8 1.25 0.64 Welder, etc.
2019-11-18 Cristobalite, respirable 0 Laborer, Bullgang
2019-11-18 Cristobalite, respirable 0.8 Welder, etc.
2019-04-26 Quartz, respirable, >1% Qtz 0.17 Supervisor, Co. Official
2019-04-26 Respirable dust, <.1mg 0 Welder, etc.
2019-04-26 Quartz, respirable, >1% Qtz 0.21 Front-end Loader Operator
2019-04-26 Respirable dust, <.1mg 0 Front-end Loader Operator
2019-02-26 Quartz, respirable, >1% Qtz 0.23 Front-end Loader Operator
2019-02-26 Quartz, respirable, >1% Qtz 0.24 Laborer, Bullgang
2019-02-26 Quartz, respirable, >1% Qtz 0.14 Front-end Loader Operator
2016-06-28 Quartz, respirable, >1% Qtz 0.41 1.62 0.25 Laborer, Bullgang
2015-04-28 Respirable dust, <.1mg 0 Front-end Loader Operator
2011-01-20 Quartz, respirable, >1% Qtz 0.34 0.65 0.52 Bobcat Operator
2009-04-29 Quartz, respirable, >1% Qtz 0.31 0.82 0.38 Crusher Oper/Worker
2009-04-29 Quartz, respirable, >1% Qtz 0.18 0.44 0.41 Laborer, Bullgang
2007-04-24 Quartz, respirable, >1% Qtz 0.58 0.7 0.83 Laborer, Bullgang
2007-04-24 Quartz, respirable, >1% Qtz 0.57 0.97 0.59 Lab Technician
2002-01-16 Quartz, respirable, >1% Qtz 1.31 1.61 0.81 Mechanic
2002-01-16 Quartz, respirable, >1% Qtz 0.13 1.05 0.12 Front-end Loader Operator
2002-01-16 Quartz, respirable, >1% Qtz 0.68 1.39 0.49 Front-end Loader Operator
2002-01-16 Quartz, respirable, >1% Qtz 0.27 1.37 0.20 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

CRUSHER #2 recorded 0.00 reportable injury cases per 100 full-time workers in 2018.

Injury rate, 2018
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.95 and the all-US-mining average was 2.33 cases per 100 workers.
In Wyoming, metal and nonmetal mining averaged 1.75 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2018 * 0.00 0.00 0.000
2017 * 0.00 0.00 0.000
2016 * 0.00 0.00 0.000
2015 * 0.00 0.00 0.000
2014 * 0.00 0.00 0.000
2013 * 16.77 16.77 0.000
2011 * 0.00 0.00 0.000
2010 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Mc Garvin-Moberly Construction Company 1999 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2023 0
2022 4
2021 9
2020 13
2019 11
2018 14
2017 11
2016 12
2015 13
2014 13
2013 13
2012 10
2011 12
2010 16
2009 20
2008 10
2007 10
2006 9
2005 9
2004 9
2003 10
2002 9
2001 9
2000 8
Source: MSHA quarterly employment and production, updated weekly.

CRUSHER #2 sits in Hot Springs County, Wyoming, where the Census mining category is 7.4% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Hot Springs County, Wyoming · Population 4,618
7.4%
Mining share of county employment
$64,375
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2023 Q2 0 1 0
2023 Q1 0 0 0
2022 Q4 0 0 0
2022 Q3 1,769 0 0 0.0
2022 Q2 3,716 0 0 0.0
2022 Q1 2,122 4 3 1885.0
2021 Q4 1,026 0 0 0.0
2021 Q3 4,795 1 0 208.6
Show 86 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2021 Q2 4,912 0 0 0.0
2021 Q1 2,281 2 1 876.8
2020 Q4 1,805 0 0 0.0
2020 Q3 6,059 0 0 0.0
2020 Q2 8,041 1 0 124.4
2020 Q1 3,983 0 0 0.0
2019 Q4 5,097 0 0 0.0
2019 Q3 4,287 0 0 0.0
2019 Q2 4,355 2 1 459.2
2019 Q1 4,783 1 1 209.1
2018 Q4 1,822 0 0 0.0
2018 Q3 6,080 1 0 164.5
2018 Q2 7,534 0 0 0.0
2018 Q1 8,095 0 0 0.0
2017 Q4 7,166 0 0 0.0
2017 Q3 7,640 0 0 0.0
2017 Q2 5,952 0 0 0.0
2017 Q1 2,742 0 0 0.0
2016 Q4 4,113 0 0 0.0
2016 Q3 5,229 0 0 0.0
2016 Q2 5,551 0 0 0.0
2016 Q1 6,163 7 3 1135.8
2015 Q4 5,228 0 0 0.0
2015 Q3 6,694 0 0 0.0
2015 Q2 6,875 2 1 290.9
2015 Q1 5,975 0 0 0.0
2014 Q4 8,026 0 0 0.0
2014 Q3 5,128 0 0 0.0
2014 Q2 8,357 1 0 119.7
2014 Q1 5,175 0 0 0.0
2013 Q4 6,151 0 0 0.0
2013 Q3 5,659 0 0 0.0
2013 Q2 5,900 1 0 169.5
2013 Q1 6,136 2 1 325.9
2012 Q4 3,893 0 0 0.0
2012 Q3 4,628 0 0 0.0
2012 Q2 4,852 2 1 412.2
2012 Q1 3,751 0 0 0.0
2011 Q4 5,049 0 0 0.0
2011 Q3 5,546 0 0 0.0
2011 Q2 3,752 0 0 0.0
2011 Q1 6,734 0 0 0.0
2010 Q4 10,543 0 0 0.0
2010 Q3 10,847 1 0 92.2
2010 Q2 2,598 0 0 0.0
2010 Q1 5,104 0 0 0.0
2009 Q4 9,690 0 0 0.0
2009 Q3 10,163 0 0 0.0
2009 Q2 7,466 1 0 133.9
2009 Q1 5,378 0 0 0.0
2008 Q4 3,730 0 0 0.0
2008 Q3 5,018 0 0 0.0
2008 Q2 4,227 0 0 0.0
2008 Q1 1,787 3 0 1678.8
2007 Q4 5,064 0 0 0.0
2007 Q3 1,754 0 0 0.0
2007 Q2 7,348 0 0 0.0
2007 Q1 3,893 0 0 0.0
2006 Q4 4,517 0 0 0.0
2006 Q3 6,730 0 0 0.0
2006 Q2 4,337 3 0 691.7
2006 Q1 5,050 1 0 198.0
2005 Q4 4,554 0 0 0.0
2005 Q3 5,064 0 0 0.0
2005 Q2 4,200 0 0 0.0
2005 Q1 4,326 2 1 462.3
2004 Q4 5,217 0 0 0.0
2004 Q3 6,122 1 0 163.3
2004 Q2 5,373 1 0 186.1
2004 Q1 5,008 4 3 798.7
2003 Q4 4,842 0 0 0.0
2003 Q3 5,560 0 0 0.0
2003 Q2 6,549 12 3 1832.3
2003 Q1 6,193 0 0 0.0
2002 Q4 5,770 0 0 0.0
2002 Q3 3,592 0 0 0.0
2002 Q2 4,581 0 0 0.0
2002 Q1 3,404 3 3 881.3
2001 Q4 3,940 0 0 0.0
2001 Q3 5,209 0 0 0.0
2001 Q2 4,345 0 0 0.0
2001 Q1 3,080 0 0 0.0
2000 Q4 3,708 0 0 0.0
2000 Q3 3,773 0 0 0.0
2000 Q2 3,490 0 0 0.0
2000 Q1 2,989 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

11 on file

2022 · 1 incident

2020 · 1 incident

June 18, 2020 WY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Mc Garvin-Moberly Construction Company · Fall onto or against objects

Technician was removing a 29.5X25 tire from the right rear position, after the tire came off the wheel, tech was setting the tire on the ground which cause the chain to loosen causing the tire to dislodge and strike the technician and caused EE to loose EE's balance and fall to the ground, landing on remote control strapped to EE's shoulders causing the fractures to the pelvis.

2013 · 2 incidents

May 3, 2013 WY · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Mc Garvin-Moberly Construction Company · Fall onto or against objects

Employee was climbing down the ladder of the 980G front end loader when his foot slipped, due to muddy boots, and fell against the upper handrails, cracking a rib on his left side.

March 25, 2013 WY · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Mc Garvin-Moberly Construction Company · Caught in, under or between (Not Elsewhere Classified)

Worker was assisting in removing a metal pole from the ground by wrapping a chain around the pole and attaching the opposite end of the chain to the skid steer bucket. The chain slipped from the pole causing the bucket to lunge upwards, where the worker had his hand, crushing his hand in between the under side of the lab shack and the bucket of the skid steer.

2009 · 1 incident

December 1, 2009 WY · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
Mc Garvin-Moberly Construction Company · Caught in, under or between (Not Elsewhere Classified)

Loading a chute on a trailer with a loader and the chute swung catching the employee shoulder to shoulder between the chute and trailer frame, causing some bruising and sprain to shoulders.

2007 · 3 incidents

March 13, 2007 WY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Mc Garvin-Moberly Construction Company · Flash burns (welding)

Flash burn to the eyes while welding

2005 · 1 incident

March 3, 2005 WY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Mc Garvin-Moberly Construction Company · Caught in, under or between (Not Elsewhere Classified)

HELPING CHANGE SCREENS ON A SCREENING PLANT & THE WRENCH SLIPPED CATCHING HIS RT. HAND, LITTLE FINGER BETWEEN THE RATCHET & A GEAR BOX, BREAKING THE FINGER.

2003 · 1 incident

March 4, 2003 WY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Mc Garvin-Moberly Construction Company · Struck by... (Not Elsewhere Classified)

SWINGING A SLEDGE HAMMER HELPING REPAIR DAMAGED FRONT END LOADER STEPS, HE MISSED AND HIT HIS LEFT INNER THIGH. HE DAMAGED MUSCLES IN LEFT THIGH.

2001 · 1 incident

December 10, 2001 WY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Mc Garvin-Moberly Construction Company · Fall to the walkway or working surface

EE WAS ATTEMPTING TO START A RECOIL START AIR COMPRESSOR WHEN THE RECOIL CORD BROKE. HE FELL OUTOF THE TRUCK IN WHICH THE COMPRESSOR WAS LOCATEDINJURING HIS RIBS, BACK AND NECK (BRUISED).