citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 367 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Flint Hill Mine has $4K in proposed MSHA penalties and $143 outstanding across 1 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$4K
proposed penalties
$4K
current assessed
$4K
paid to date
$143
outstanding
42 assessments are final orders; 1 contested dockets.
Of $225 in penalties contested before the Commission, $95 was upheld in final decisions.
As of the most recent assessment on 2005-07-06.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘContesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
2citations taken to the federal commission · 5% of citations on record
Settled
2 · 100%
100%
S&S designation survived the contest
ⓘCounts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 2 decided S&S contests · industry: 79%
58%
Penalty reduction in decided contests
$225 proposed, $95 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2005-04-07.
Contested penalties
ⓘA reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
MSHA sampling at Flint Hill Mine shows 100% of 10 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2005-09-21, 20 years ago
100%
within 1.5 mg/m3
10
samples
0.28
dust max (mg/m3)
10 samples taken by MSHA inspectors, 0 by the operator.
Most-sampled occupations
BULLDOZER OPERATOR4
HIGHLIFT OPERATOR/FRONT END LOADER3
COAL TRUCK DRIVER1
Noise
ⓘThe share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Health sampling trend
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Flint Hill Mine recorded 10.28 reportable injury cases per 100 full-time workers in 2005.
Injury rate, 2005
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
10.28
total case rate
5.14
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 5.11 and the all-US-mining average was 4.21 cases per 100 workers.
In Indiana, coal mining averaged 3.36 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2005 *
10.28
5.14
0.000
2004 *
4.29
4.29
0.000
2003 *
4.81
0.00
0.000
2002 *
14.27
10.70
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘCoal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year
Employees
Coal produced (tons)
2008
0
2007
0
2006
0
2005
14
217,431
2004
18
311,157
2003
18
336,062
2002
22
411,973
2001
21
199,095
2000
0
Source: MSHA quarterly employment and production, updated weekly.
Flint Hill Mine sits in Spencer County, Indiana, where the Census mining category is 0.5% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Spencer County, Indiana · Population 19,871
0.5%
Mining share of county employment
$70,890
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2008 Q2
0
0
0
2007 Q4
0
0
0
2007 Q2
0
0
0
2007 Q1
0
0
0
2006 Q4
0
0
0
2006 Q3
0
0
0
2006 Q2
0
0
0
2006 Q1
0
0
0
Show 21 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2005 Q4
5,497
0
0
0.0
2005 Q3
9,752
4
2
410.2
2005 Q2
11,093
0
0
0.0
2005 Q1
12,580
3
2
238.5
2004 Q4
10,592
0
0
0.0
2004 Q3
12,216
0
0
0.0
2004 Q2
11,202
2
0
178.5
2004 Q1
12,627
5
1
396.0
2003 Q4
10,782
0
0
0.0
2003 Q3
11,523
0
0
0.0
2003 Q2
9,873
0
0
0.0
2003 Q1
9,382
2
0
213.2
2002 Q4
10,457
0
0
0.0
2002 Q3
12,875
0
0
0.0
2002 Q2
16,186
1
0
61.8
2002 Q1
16,542
5
3
302.3
2001 Q4
15,250
8
4
524.6
2001 Q3
15,784
5
0
316.8
2001 Q2
4,906
0
0
0.0
2000 Q2
0
0
0
2000 Q1
0
0
0
No fatalities recorded at this mine.
Reportable incidents
8 on file
2005 · 2 incidents
September 28, 2005IN · Coalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
Employee had just put a pin in the ripper and as he was standing up the ripper shifted causing the chain from the boom to drop hitting him on the shoulder.
February 21, 2005IN · Coalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDLING OF MATERIALS