Employee was unhooking a pump hose when the end came loose and struck his cheek.
South Augusta: 66 MSHA citations Coal
Triad Mining Inc
· Surface
Controlled by
James River Coal Company
Winslow,
Pike County,
IN
·
Abandoned
MSHA Mine ID: 1202358
South Augusta has $11K in proposed MSHA penalties and $358 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at South Augusta.
- Fatalities
- 0
- Total incidents
- 4
- Years on record
- 2005–2009
- Latest incident
- Jun 2009
Compliance record
MSHA citations since 2004
66
citations
16
significant & substantial
$10,881
proposed penalties
$10,523
paid to date
97% of proposed penalties paid to date, a $358 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2004
15
inspections on record
405
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 405 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
South Augusta has $11K in proposed MSHA penalties and $358 outstanding across 0 contested dockets.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$11K
proposed penalties
$11K
current assessed
$11K
paid to date
$358
outstanding
66 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2009-12-11.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.24.2%
significant & substantial
4.5%
high negligence or reckless
24.2%
reasonably likely or greater
4.5%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 21.2% low, 74.2% moderate, 4.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
MSHA sampling at South Augusta shows 100% of 44 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2010-05-11, 16 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.100%
within 1.5 mg/m3
44
samples
0.76
dust max (mg/m3)
44 samples taken by MSHA inspectors, 0 by the operator.
Most-sampled occupations
- BULLDOZER OPERATOR11
- HIGHLIFT OPERATOR/FRONT END LOADER10
- HIGHWALL DRILL OPERATOR7
Silica (quartz)
Last sampled: 2008-08-25, 18 years ago9.5
silica avg (%)
1
samples
9.5
silica max (%)
Most-sampled occupations
- BULLDOZER OPERATOR1
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2010-05-11, 16 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.0%
over PEL
20
samples
Most-sampled occupations
- HIGHLIFT OPERATOR/FRONT END LOADER6
- BULLDOZER OPERATOR4
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE4
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust by year
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2010 | 100% | 5 |
| 2009 | 100% | 11 |
| 2008 | 100% | 18 |
| 2006 | 100% | 5 |
| 2005 | 100% | 5 |
Noise by year
| Year | over PEL | samples |
|---|---|---|
| 2010 | 0% | 5 |
| 2009 | 0% | 5 |
| 2008 | 0% | 5 |
| 2005 | 0% | 5 |
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
South Augusta recorded 0.00 reportable injury cases per 100 full-time workers in 2010.
Injury rate, 2010
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.96 and the all-US-mining average was 3.20 cases per 100 workers.
In Indiana, coal mining averaged 3.57 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2010 * | 0.00 | 0.00 | 0.000 |
| 2009 * | 2.84 | 0.00 | 0.000 |
| 2008 * | 0.00 | 0.00 | 0.000 |
| 2007 * | 2.80 | 0.00 | 0.000 |
| 2006 * | 2.75 | 0.00 | 0.000 |
| 2005 * | 3.38 | 0.00 | 0.000 |
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
- Triad Mining Inc 2004 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2011 | 4 | |
| 2010 | 23 | 597,883 |
| 2009 | 27 | 711,971 |
| 2008 | 26 | 573,103 |
| 2007 | 25 | 538,969 |
| 2006 | 27 | 671,279 |
| 2005 | 26 | 477,194 |
| 2004 | 8 |
Source: MSHA quarterly employment and production, updated weekly.
South Augusta sits in Pike County, Indiana, where the Census mining category is 2.5% of county employment.
Local economic context
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.Pike County, Indiana · Population 12,187
2.5%
Mining share of county employment
$66,250
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.Citations per million employee-hours, as reported to MSHA
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2011 Q1 | 1,892 | 0 | 0 | 0.0 |
| 2010 Q4 | 12,244 | 0 | 0 | 0.0 |
| 2010 Q3 | 16,463 | 0 | 0 | 0.0 |
| 2010 Q2 | 18,188 | 0 | 0 | 0.0 |
| 2010 Q1 | 16,992 | 0 | 0 | 0.0 |
| 2009 Q4 | 17,447 | 5 | 3 | 286.6 |
| 2009 Q3 | 16,338 | 0 | 0 | 0.0 |
| 2009 Q2 | 17,345 | 2 | 0 | 115.3 |
Show 19 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2009 Q1 | 19,342 | 0 | 0 | 0.0 |
| 2008 Q4 | 18,518 | 5 | 0 | 270.0 |
| 2008 Q3 | 18,297 | 3 | 0 | 164.0 |
| 2008 Q2 | 20,379 | 0 | 0 | 0.0 |
| 2008 Q1 | 19,548 | 13 | 2 | 665.0 |
| 2007 Q4 | 17,545 | 0 | 0 | 0.0 |
| 2007 Q3 | 17,541 | 0 | 0 | 0.0 |
| 2007 Q2 | 17,011 | 0 | 0 | 0.0 |
| 2007 Q1 | 19,225 | 0 | 0 | 0.0 |
| 2006 Q4 | 17,851 | 0 | 0 | 0.0 |
| 2006 Q3 | 18,447 | 2 | 0 | 108.4 |
| 2006 Q2 | 17,824 | 0 | 0 | 0.0 |
| 2006 Q1 | 18,699 | 6 | 1 | 320.9 |
| 2005 Q4 | 16,416 | 0 | 0 | 0.0 |
| 2005 Q3 | 17,385 | 0 | 0 | 0.0 |
| 2005 Q2 | 9,896 | 6 | 1 | 606.3 |
| 2005 Q1 | 15,549 | 6 | 3 | 385.9 |
| 2004 Q4 | 1,895 | 1 | 0 | 527.7 |
| 2004 Q2 | 0 | 0 | 0 |
No fatalities recorded at this mine.
Reportable incidents
4 on file2009 · 1 incident
June 11, 2009
IN · Coal
laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman
HANDLING OF MATERIALS
Triad Mining Inc · Struck by... (Not Elsewhere Classified)
2007 · 1 incident
October 3, 2007
IN · Coal
maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech
HANDLING OF MATERIALS
Triad Mining Inc · Struck by... (Not Elsewhere Classified)
Employee had a socket break in his hand cutting his palm requiring stitches.
2006 · 1 incident
November 21, 2006
IN · Coal
laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman
HANDLING OF MATERIALS
Triad Mining Inc · Struck by... (Not Elsewhere Classified)
HE WAS HELPING THE MECHANIC PUT A GUARD ON THE RIPPER SHANK OF A D-11 DOZER, HE WAS HOLDING THE KEEPER FOR HIM. THE MECHANIC SLIPPED MASHING/CUTTING EE'S MIDDLE RIGHT FINGER.
2005 · 1 incident
August 19, 2005
IN · Coal
greaser, grease man, oiler, lube man, dragline oiler
HANDLING OF MATERIALS
Triad Mining Inc · Struck against stationary object
Working on Grease Truck, turned and hit forhead on ladder requiring stitches.