Goose Creek Plant Metal/Non-Metal

While opening the front gate the associate inserted a bolt with washer used to keep the gate from swinging shut. Before the bolt was inserted completely, the gate sprung backwards pinching the associates finger between the gate and the washer on the bolt causing a laceration to one finger that required stitches.

While delivering material I realized that my truck was having issues. I called towing company who came & loaded the truck. Then took the truck to the quarry to unload the material. After unloading the material, I proceeded to step out of the truck only to discover that the wrecker had raised the truck further from the ground causing me to fall & injure myself.

Employee was trying to remove a piece of metal that he had cut from the old jaw structure. He was moving it with a digging bar. He turned at the waist and pulled up on the bar and felt his lower back pull. The metal was 4'x 6' x 3/4".

While reworking a steel screen feed box EE cut a steel plate loose without securing it and it turned over on his arm. The plate cracked the bone in his right arm just above the wrist.

Cleaning chunks of ammonium nitrate out of the hopper on a repump unit, cut right arm and hand on the edges of the hopper.

CUTTING SHAFT OF UPPER BEND PULLEY-NOTICED SOMETHING IN EYE.

WORK WAS BEING PERFORMED ON C-5 HAND PULLEY SCRAPPER. SCRAPPER WAS ALLOWED TO FALL AND PINCH FINGER.

EMPLOYEE WAS CHANGING FROM BUCKET TO HAMMER. HE WAS TIGHTENING HOSE ON HAMMER WHEN THE WRENCH SLIPPED OFF HITTING HIM ON THE RIGHT WRIST.

EE WAS CARRYING 2 WOODEN BLOCKS. HIS FEET SLIPPED ON ICE AND HE FELL, CATCHING HIS FINGER UNDER THE TWO BLOCKS CRUSHING AND SLICING TIP OF FINGER.

EMPLOYEE WAS USING A CROWBAR TO CHIP CONCRETE OUT OF THE PUGMILL. THE BAR SLIPPED AND STRUCK HIM IN THE RIGHT EYE- TEMPLY AREA.

LIFTING ROCK OUT OF CRUSHER BIN PULLED MUSCLE IN SHOULDER

EMPL WALKING BACKWARDS REMOVING WELDING LEADS-CABLES-TRIPPED AND FELL BACKWARDS INTO FEED HOPPER ON GROUND BEING WORKED ON.

EMPL USING CABLE ATTACHED TO LOADER WHILE CHANGING CRUSHER BOWL.CABLE SNAPPED AND CABLE STRUCK EMPL IN CHEST AND STOMACH AREA.

EMPL & 2 OTHERS REMOVING STONE BIN SHAKER SCREENS AND PULLED GROIN MUSCLES.

EMPLOYEE WAS IDSASSEMBLING A HYDRAULIC BODY LIFT ASSEMBLY ON A 35 TON DUMP TRUCK. HE WAS USING A PORTAPOWER WITH 4 11/2 SOCKETS AS SPACERS TO PUSH THE PIN OUT OF THE BUSHING. THE LIFT ASSEBLY WAS BEING HELD BY A STRAP CONNECTED TO THE WHEN ON THE CRANE OF A MECHANICS TRUCK TO HOLD IT SECURE. HE STUCK HIS FINGER INTO THE BUSHING TO RETREIVE THE LAST SOCKET WHEN THE LIFT ASSEMBLY MOV

WHILE UNLOADING CASING, A JOINT OF CASING FELL ON HIS FOOT. IT HIT ABOVE HIS STEEL SAFETY TOE.

EMPLOYEE WAS UNHOOKING A PIECE OF STEEL RFROM A LOADER BUCKET WHEN THE STEEL WAS UNHOOKED IT FELL ON EMPLOYEES FOOT

WHILE PLACING A SCREEN PLATE ON SCREEN IT SLIPPED & CUT THE END OF EMPLOYEES LITTLE FINGER OFF ON HIS RT HAND

CLIMBING DOWN LADDER OFF 988 LOADER FOOT SLIPPED AND HE BANGED HIS ELBOW

STEPPED ON MUFFLER TO CHANGE BRAKE BOOSTER

WAS LIFTING A PIECE OF STEEL WHEN HE STRAINED HIS BACK

WAS STEPPPING OUT OF A 3 SIDED HOPPER WITH A LOW LIP ON THE FOURTH SIDE <STARTING ON WORK SHOP FLOOR EMPLOYEE CAUGHT HIS TOE ON THE LIP FELL & TWISTED HIS KNEE

EMPLOYEE SLIPPE8 & FELL ON CATWALK FELL UNDER HAND RAIL TO GROUND EMPLOYEE WORKED FOR TWO MONTHS FOLLOWING THIS ACCIDENT INJURY WAS TO THE BACK

EMPLOYEE WAS HAVING TO SPILL PILE. HE WAS BACKING UP TO DUMP. HE SAID HE COULD NOT GET TRUCK STOPPED. TRUCK BACKED OVER EDGE OF PILE END OVER END.

EMPLOYEE WAS PULLING ON WRENCH TO TIGHTEN BOLT, AT WHICH TIME HE FELT A PAIN IN HIS RIGHT ABDOMEN.

EMPLOYEE WAS PULLING ON WRENCH TO TIGHTEN BOLT DOING SO HE PULLED MUSCLE IN LEFT SHOULDER

REMOVING AIR-TANK ON SHOVEL WHILE ANOTHER PERSON WAS SCRAPING RUST AND DIRT FROM SIDE OF SHOVEL WHEN PIECE OF RUST FELL INTO EMPL EYE.

EMPLOYEE WAS STEADING SOCKET SEALING RING AS IT WAS BEING LOWERED INTO PLACE WITH COME-ALONG CONE-ALONG JAMMED UPON TRYING TO UNJAM COME-ALONG RING FELL CAUSING INJURY