citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 652 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Gordon No 1 has $11K in proposed MSHA penalties and $0 outstanding across 2 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$11K
proposed penalties
$11K
current assessed
$11K
paid to date
$0
outstanding
104 assessments are final orders; 2 contested dockets.
Of $2K in penalties contested before the Commission, $1K was upheld in final decisions.
As of the most recent assessment on 2006-06-21.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘContesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
1citations taken to the federal commission · 1% of citations on record
Settled
1 · 100%
0%
Penalty reduction in decided contests
$60 proposed, $60 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2004-12-13.
Contested penalties
ⓘA reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
MSHA sampling at Gordon No 1 shows 100% of 71 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2006-07-10, 20 years ago
100%
within 1.5 mg/m3
71
samples
1.15
dust max (mg/m3)
51 samples taken by MSHA inspectors, 20 by the operator.
Noise
ⓘThe share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Health sampling trend
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Gordon No 1 recorded 3.17 reportable injury cases per 100 full-time workers in 2006.
Injury rate, 2006
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
3.17
total case rate
3.17
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 4.87 and the all-US-mining average was 3.91 cases per 100 workers.
In Kentucky, coal mining averaged 5.96 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2006 *
3.17
3.17
0.000
2005 *
3.69
0.00
0.000
2004 *
0.00
0.00
0.000
2001 *
4.43
0.00
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘCoal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year
Employees
Coal produced (tons)
2007
0
2006
24
216,097
2005
21
193,514
2004
25
271,521
2003
7
38,796
2002
0
2001
21
114,358
2000
31
339,066
Source: MSHA quarterly employment and production, updated weekly.
Gordon No 1 sits in Letcher County, Kentucky, where the Census mining category is 3.5% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Letcher County, Kentucky · Population 21,146
3.5%
Mining share of county employment
$40,501
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2007 Q4
0
0
0
2007 Q3
0
0
0
2007 Q1
0
0
0
2006 Q4
0
0
0
2006 Q3
17,127
0
0
0.0
2006 Q2
24,536
4
0
163.0
2006 Q1
21,337
3
0
140.6
2005 Q4
15,581
0
0
0.0
Show 22 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2005 Q3
0
0
0
2005 Q2
18,494
10
1
540.7
2005 Q1
20,064
0
0
0.0
2004 Q4
21,242
11
3
517.8
2004 Q3
18,935
0
0
0.0
2004 Q2
15,554
18
13
1157.3
2004 Q1
6,752
0
0
0.0
2003 Q4
12,419
7
2
563.7
2003 Q3
0
4
0
2003 Q2
0
0
0
2003 Q1
0
0
0
2002 Q4
0
1
0
2002 Q3
0
5
1
2002 Q2
0
0
0
2002 Q1
0
0
0
2001 Q4
0
0
0
2001 Q3
6,144
0
0
0.0
2001 Q2
18,247
8
3
438.4
2001 Q1
20,783
0
0
0.0
2000 Q4
21,544
11
3
510.6
2000 Q3
24,583
1
1
40.7
2000 Q2
23,529
14
9
595.0
No fatalities recorded at this mine.
Reportable incidents
6 on file
2007 · 1 incident
August 20, 2007KY · Coalbulldozer operator, universal operator, heavy equipment operator, operating engineerMACHINERY
Employee went to get out of truck, the door opened to easy and the employee fell out. Employee caught his foot between the steering wheel and the seat hurting his groin area and back.
2005 · 1 incident
March 26, 2005KY · Coallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanSLIP OR FALL OF PERSON
Employee was walking down slope pulling hose for the hydroseeder when he slipped. Employee caught himself with his right hand on a rock and cut his thumb area. He received four stitches.
2001 · 1 incident
January 2, 2001KY · Coalblaster, shooter, shotfirer, explosive worker, powder gang/monkeyHANDLING OF MATERIALS