Granbury Stone Co. has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Granbury Stone Co..
Fatalities
0
Total incidents
2
Years on record
2005
Latest incident
Nov 2005
Compliance record
MSHA citations since 2002
16
citations
5
significant & substantial
$1,197
proposed penalties
$1,197
paid to date
100% of proposed penalties paid to date, a $0 gap.
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 171 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Granbury Stone Co. has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$1K
proposed penalties
$1K
current assessed
$1K
paid to date
$0
outstanding
16 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2007-07-25.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2005-04-13, 21 years ago
0%
of limit-tested samples over the exposure limit
4
samples
3
limit-tested
Most sampled contaminants
Quartz, respirable, >1% Qtz3
Respirable dust, <.1mg1
Show the individual readings (4)
Date
Contaminant
Concentration
Limit
Conc / limit
Occupation
2005-04-13
Quartz, respirable, >1% Qtz
0.56
3.03
0.18
Stone Polisher/Cutter
2005-04-13
Quartz, respirable, >1% Qtz
0.82
2.65
0.31
Stone Polisher/Cutter
2005-04-13
Respirable dust, <.1mg
0
Stone Polisher/Cutter
2005-04-13
Quartz, respirable, >1% Qtz
0.87
3.06
0.28
Stone Polisher/Cutter
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Granbury Stone Co. recorded 0.00 reportable injury cases per 100 full-time workers in 2006.
Injury rate, 2006
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 3.41 and the all-US-mining average was 3.91 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 2.55 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2006 *
0.00
0.00
0.000
2005 *
7.47
7.47
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2007
11
2006
13
2005
13
2004
8
2003
6
2002
5
Source: MSHA quarterly employment and production, updated weekly.
Granbury Stone Co. sits in Hood County, Texas, where the Census mining category is 3.6% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Hood County, Texas · Population 64,198
3.6%
Mining share of county employment
$86,802
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2007 Q3
5,384
1
0
185.7
2007 Q2
5,467
0
0
0.0
2007 Q1
6,363
0
0
0.0
2006 Q4
6,443
0
0
0.0
2006 Q3
6,886
0
0
0.0
2006 Q2
6,536
9
2
1377.0
2006 Q1
6,408
1
0
156.1
2005 Q4
6,576
0
0
0.0
Show 13 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2005 Q3
6,781
0
0
0.0
2005 Q2
8,112
1
0
123.3
2005 Q1
5,308
0
0
0.0
2004 Q4
4,793
1
1
208.6
2004 Q3
5,395
0
0
0.0
2004 Q2
4,701
0
0
0.0
2004 Q1
2,621
0
0
0.0
2003 Q4
2,950
1
1
339.0
2003 Q3
3,244
0
0
0.0
2003 Q2
3,263
0
0
0.0
2003 Q1
3,358
0
0
0.0
2002 Q4
2,988
2
1
669.3
2002 Q3
2,421
0
0
0.0
No fatalities recorded at this mine.
Reportable incidents
2 on file
2005 · 2 incidents
November 12, 2005TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
Employee threw a rock onto other ee right hand, thus fracturing 2 fingers on other ee. Ee was not watching where he was throwing the rock to make sure the area was clear. Another was moving a rock when he was hit on the hand with the rock Ee had thrown
Truck driver returned from scale complaining of chest pains and said he though he was having a heart attack. He requested an ambulance which arrived at approx. 2:50 pm and took the driver to the medical center E.R. Temperature 95 degrees F outside. **Truck driver worked for a customer**