Hilliard Dozer, LP has $45K in proposed MSHA penalties and $0 outstanding across 2 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Hilliard Dozer, LP.
Fatalities
0
Total incidents
4
Years on record
2016–2018
Latest incident
Jul 2018
Compliance record
MSHA citations since 2011
97
citations
26
significant & substantial
$44,874
proposed penalties
$42,750
paid to date
95% of proposed penalties paid to date, a $2,124 gap.
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 622 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Hilliard Dozer, LP has $45K in proposed MSHA penalties and $0 outstanding across 2 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$45K
proposed penalties
$43K
current assessed
$43K
paid to date
$0
outstanding
96 assessments are final orders; 2 contested dockets.
Of $6K in penalties contested before the Commission, $4K was upheld in final decisions.
As of the most recent assessment on 2026-01-06.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘContesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
4citations taken to the federal commission · 4% of citations on record
Settled
4 · 100%
100%
S&S designation survived the contest
ⓘCounts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 3 decided S&S contests · industry: 79%
36%
Penalty reduction in decided contests
$6K proposed, $4K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2012-12-18.
Contested penalties
ⓘA reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2017-06-01, 9 years ago
8
samples
0
limit-tested
Most sampled contaminants
Respirable dust, <.1mg6
Unlisted Particulate, respirable, <1% Qtz2
Show the individual readings (8)
Date
Contaminant
Concentration
Limit
Conc / limit
Occupation
2017-06-01
Respirable dust, <.1mg
0
Front-end Loader Operator
2017-06-01
Respirable dust, <.1mg
0
Utility Man
2016-09-28
Respirable dust, <.1mg
0
Front-end Loader Operator
2016-09-28
Respirable dust, <.1mg
0
Laborer, Bullgang
2016-09-28
Unlisted Particulate, respirable, <1% Qtz
0.2
Laborer, Bullgang
2012-05-01
Respirable dust, <.1mg
0
Truck Driver
2012-05-01
Respirable dust, <.1mg
0
Backhoe Operator
2012-05-01
Unlisted Particulate, respirable, <1% Qtz
0.17
Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Hilliard Dozer, LP recorded 0.00 reportable injury cases per 100 full-time workers in 2014.
Injury rate, 2014
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 2.39 and the all-US-mining average was 2.93 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 2.81 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2014 *
0.00
0.00
0.000
2013 *
0.00
0.00
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2026
8
2025
7
2024
9
2023
7
2022
5
2021
4
2020
5
2019
7
2018
7
2017
8
2016
8
2015
7
2014
10
2013
9
2012
8
2011
9
2010
10
Source: MSHA quarterly employment and production, updated weekly.
Hilliard Dozer, LP sits in Bell County, Texas, where the Census mining category is 0.7% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Bell County, Texas · Population 379,811
0.7%
Mining share of county employment
$66,051
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Hilliard Dozer, LP · Caught in, under or between a moving and a stationary object
Employee was helping our company truck driver free a jammed rock from dump trailer when the rock crushed causing the employees left hand to get stuck between the trailer and a bar attached to the trailer. The bar caused damage to the employees hand but cutting it and peeling back the skin on fingers.
2017 · 2 incidents
October 4, 2017TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
Miner was removing back plate on 5x14 screen. Approx 15"x4' one end slipped down striking miner on wrist. bleeding was minimal. However there appeared to be an indention on the wrist. Miner was sent to the doctor for further treatment.
2016 · 1 incident
December 7, 2016TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDTOOLS (NONPOWERED)
Hilliard Dozer, LP · Caught in, under or between (Not Elsewhere Classified)
Employee was making repairs on the screen of the plant when a bar slipped and smashed the right hand between the bar and screen area, causing immediate pain.