Hunter Quarry has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Hunter Quarry.
Fatalities
0
Total incidents
8
Years on record
2007–2013
Latest incident
Jul 2013
Compliance record
MSHA citations since 2007
16
citations
5
significant & substantial
$2,291
proposed penalties
$2,291
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2007
15
inspections on record
199
inspection hours
n/a
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 199 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Hunter Quarry has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2K
proposed penalties
$2K
current assessed
$2K
paid to date
$0
outstanding
16 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2012-07-16.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
7/12/2013 EE was driving truck on site, he drove over a bumpy portion of the mine road causing his elbow to strike the arm rest. EE reported injury on 7/15/2013 EE saw phys. on 7/18/2013-CT scan ordered shows bone chip on elbow. Follow-up reading sched. 8/6/2013 to determine if work related or an existing injury. Item being treated as reportable pending verification by phys.
2012 · 1 incident
August 17, 2012WY · Metal/Non-Metalcrane operator, mobile equipment operator (meo), dragline operator, dropball operator, riggerHANDLING OF MATERIALS
Pete Lien & Sons Inc · Caught in, under or between a moving and a stationary object
Employee was changing a screen on a screen deck, he was pulling on an angle-iron rail and when the item was dislodged he pinched his thumb on his right hand between the rail and the screen motor. EE suffered a broken bone in his thumb and a contusion to the thumb nail.
2011 · 1 incident
October 20, 2011WY · Metal/Non-Metaloutside foreman, leadmanMACHINERY
While lifting the motor guard on HP400 cone with a crane, the picking bolt pulled out of the threads and the guard came down from the crane hook. As the guard came down, the corner of the guard hit ee in the face on the left cheek. EE was taken to the hospital where he received five stitches.
2009 · 1 incident
January 9, 2009WY · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDLING OF MATERIALS
EE had cranked up the lights to turn them on. When he went to start them, the fiber clutch failed. The lights started to come down with the crank handle spinning. Ron tried to stop the handle and was hit in the left hand, on the ring finger.
2008 · 2 incidents
November 10, 2008WY · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDLING OF MATERIALS
Pete Lien & Sons Inc · Caught in, under or between a moving and a stationary object
Had crusher operator shut down Jaw to put a chain around big rock to move rock. Waited for jaw to stop and put chain around. Reached in between jaw dye and rock. The dye rolled crushing finger.
Pete Lien & Sons Inc · Caught in, under or between a moving and a stationary object
Big rock in Jaw Crusher. Shut down Jaw Crusher. Jaw had come to a complete stop. Reached around rock between Jaw Dye and rock. Jaw Dye moved inward about 2 inches, pinning my right arm in between rock and Jaw dye, causing swelling and bruising of the arm.
2007 · 2 incidents
November 14, 2007WY · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDLING OF MATERIALS
I was lifting a 60 lb. roller for a converger to get it out of way. I must of been twisting as lifting. Back popped and I fell to the ground. Could not get up for a couple minutes, but when I did get up, the pain was bad and I could not walk very well.
October 13, 2007WY · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanSLIP OR FALL OF PERSON
While on catwalk, I reached down through handrail to loosen bolts on flashing rail. My left leg was braced on the side of the conveyor. When I started to loosen the nuts, my leg slipped off and my left knee twisted as it hit the side of the railing.
For insurers, brokers, and safety consultants
The full compliance file on Hunter Quarry
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and
docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF
with the underlying data as CSV.