Mining Incidents

JIM STEPHENS INC: 12 MSHA citations Metal/Non-Metal

Jim Stephens Inc · Surface
Controlled by Jim Stephens
Gallup, Mckinley County, NM  ·  Abandoned
MSHA Mine ID: 2902099

JIM STEPHENS INC has $778 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at JIM STEPHENS INC.

Fatalities
0
Total incidents
6
Years on record
1993–2003
Latest incident
Nov 2003
Compliance record
MSHA citations since 2002
12
citations
1
significant & substantial
$778
proposed penalties
$778
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
18
inspections on record
187
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 187 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

JIM STEPHENS INC has $778 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$778
proposed penalties
$778
current assessed
$778
paid to date
$0
outstanding
11 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2006-11-07.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
9.1%
significant & substantial
0.0%
high negligence or reckless
9.1%
reasonably likely or greater
45.5%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 27.3% low, 72.7% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2000-11-29, 25 years ago
0%
of limit-tested samples over the exposure limit
4
samples
4
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz4
Show the individual readings (4)
Date Contaminant Concentration Limit Conc / limit Occupation
2000-11-29 Quartz, respirable, >1% Qtz 0.34 0.7 0.49 Screen/Scalper Operator
2000-11-29 Quartz, respirable, >1% Qtz 0.42 0.45 0.93 Crusher Oper/Worker
2000-11-29 Quartz, respirable, >1% Qtz 0.64 0.88 0.73 Front-end Loader Operator
2000-11-29 Quartz, respirable, >1% Qtz 0.24 0.29 0.83 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. Jim Stephens Inc 1992 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2006 7
2005 7
2004 6
2003 7
2002 9
2001 8
2000 14
Source: MSHA quarterly employment and production, updated weekly.

JIM STEPHENS INC sits in McKinley County, New Mexico, where the Census mining category is 0.7% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
McKinley County, New Mexico · Population 71,172
0.7%
Mining share of county employment
$44,496
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2006 Q3 6,969 0 0 0.0
2006 Q2 3,340 1 0 299.4
2006 Q1 4,512 0 0 0.0
2005 Q4 1,210 2 0 1652.9
2005 Q3 3,426 0 0 0.0
2005 Q2 3,202 0 0 0.0
2005 Q1 1,370 0 0 0.0
2004 Q4 800 2 0 2500.0
Show 14 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2004 Q3 1,831 0 0 0.0
2004 Q2 5,365 0 0 0.0
2004 Q1 1,859 1 1 537.9
2003 Q4 1,484 0 0 0.0
2003 Q3 3,134 0 0 0.0
2003 Q2 4,768 0 0 0.0
2003 Q1 1,210 0 0 0.0
2002 Q4 3,983 0 0 0.0
2002 Q3 3,887 0 0 0.0
2002 Q1 5,031 4 0 795.1
2001 Q3 3,437 0 0 0.0
2001 Q2 1,727 0 0 0.0
2000 Q2 2,384 0 0 0.0
2000 Q1 3,056 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

6 on file

2003 · 1 incident

November 24, 2003 NM · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Jim Stephens Inc · Struck by falling object

WORKING ON A BRAKE DRUM. FRONT WHEEL DUMP TRUCK BRAKE DRUM FELL ON EMPLOYEE, BROKE A FINGER.

2002 · 2 incidents

July 17, 2002 NM · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Jim Stephens Inc · Struck by... (Not Elsewhere Classified)

MEN WERE BUILDING FENCE. ONE MAN PULLED ON BARB WIRE. WIRE CUT VICTIM'S RIGHT EAR.

March 5, 2002 NM · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Jim Stephens Inc · Fall from machine

HE WAS DOING A PRE-SHIFT INSPECTION ON 74 TRUCK FORD 800 FUEL TRUCK, STEPPED OFF TRUCK & TWISTEDHIS ANKLE. HE WAS IN PAIN- WENT TO THE DR. & FOUND CRACKED BONE IN RT. ANKLE.

1999 · 1 incident

January 9, 1999 NM · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech POWERED HAULAGE
Jim Stephens Inc · Caught in, under or between (Not Elsewhere Classified)

EE WAS ASKED TO CHECK A PTO LEVER ON A DUMP TRUCK HE BUMPED THE LEVER WHICH CAUSED THE PTO GEAR TO GRIND AGAINST THE TRANSMISSION GEARS. THIS SPUN THE PTO SHAFT HIS COVERALLS GOT CAUGHT BY TH E SHAFT WHICH BROKE HIS ARM. LEFT UPPER EXTREMITY HAD RECEIVED AN AVULSION & FRACTURE TO THE FOREARM EQUIPEMENT SHOULD NOT BE WORKED ON WITH ENGINE RUNNING

1993 · 2 incidents

May 4, 1993 NM · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Jim Stephens Inc · Over-exertion in pulling or pushing objects

EMPLOYEE WAS PULLING ON A LARE WRENCH WHICH SLIPPED & HIT HIM IN THE MOUTH HE WENT TO DOC WHO PULLED A TOOTH

February 17, 1993 NM · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator STRIKING OR BUMPING
Jim Stephens Inc · Struck against stationary object

INJURED REMOVED HIS HARD HAT AFTER WORK. WALKING TO HIS CAR HE WALKED INTO A LOADER BUCKET AND BUMPED HIS HEAD. HE WENT TO DR AND GOT A DAY OFF. HE THEN COMPLAINED OF A HEADACHE AND PAIN ME DICINE MADE HIM DROZEY. TOOK THE REST OF WEEK OFF.