Lathrop Mill: 1 recorded fatality Metal/Non-Metal

EMPLOYEE WAS REPLACING BATTERIES ON A 966 FRONT END LOADER, HE BENT DOWN TO GET A WRENCH, HE RAISED UP AND STRUCK HIS HEAD ON THE MIRROR FRAME CAUSING A CUT - NEEDING STITCHES.

EE WAS RUNNING DOWN STEPS AND RAN INTO CORNER OF A PIPE, INJURING LEFT SIDE RIB AREA.

UNCERTAIN. NO COMPANY ACCIDENT REPORT RECEIVED. NOTIVIED BY DOCTOR 1/20/03. INFORMATION RECEIVED WAS INCOMPLETE. THIS CLAIM IS CURRENTLY IN LITIGATION.

EE WAS TIGHTENING A BEARING WITH A WRENCH SLIPPED AND EE HIT HIS LEFT HAND ON SOME SHARP METAL, CAUSING A CUT.

EE WAS RUNNING A WATERED DOWN LAB SAMPLE THAT CONTAINED A .04 ACID. THE SAMPLE SPLASHED WHEN THE VACUUME SUCKED THE BOTTLE CORK INTO THE SOLUTION, CAUSING IT TO SPLATTER EE'S FACE AND SHIRT-CA USING SKIN IRRITATION.

EE STEPPING OFF OF A LOADER STEPPED ON ROCK SPRAINING LEFT ANKLE.

EE WAS PULLING ON BAG HOUSE DOOR WHEN HE FELT SHARP PAIN IN LOWER BACK.

WHILE TRYING TO INSTALL MISSING TIRE ON LOADER, LIFTING WITH BAR HAD A HERNIA.

WHEN EMPLOYEE WAS USING COMEALONG HOIST HE WAS PUSHING WITH LEFT LEG AND BODY. WHEN LEFT FOOT SLIPPED STRIKING AGAINST A STEEL POST HURTING LEFTANKLE.

EMPLOYEE WAS CLEANING UNDER DRYER AREA WHEN A CRYSTAL FELL DOWN FROM CRYSTAL BOX HITTING HIS LEFT HAND CAUSING A LACERATION.

EE WAS PUSHING WET OR MATERIAL THRU GRIZZLY HOPPER CHUTE WH4EN BAR HE WAS USINGSTRUCK EDGE OF BIN, CAUSING CUT BETWEEN RIGHT HAND THUMB & FORFINGER NEEDING STITCHES.

EE WAS WALKING AT CRUSHER AREA-HE SLIPPED ON SOME MUD FELL AND HURT RIGHT WRIST.

EE WAS WALKING AT DRYER AREA, WHEN SHE TWISTED LEFT ANKLE CAUSING SOME SWELLING.

EE WAS ASSISTING IN INSERTING A THIN GLASS TUBING BACK INTO A RUBBER HOSE. GLASS TUBING SLIPPED CAUSING PUNCTURE WOUND TO MIDDLE FINGER ON LEFT HAND.

EE WAS SENT TO LAS VEGAS FOR COMPANY PARTS WAS STOPPED AT A RED LIGHT ON MAIN STREET, WHEN SHE WAS HIT FROM BEHIND BY ANOTHER AUTOMOBILE

REPETATIVE MOTION.

WORKER WAS LIFTING PALLET AND PLACING TO BAG MATERIAL. HE TURNED WITH A PALLET.

WRIST AND HAND STARTED HURTING WHILE RUNNING SAMPLE TEST.

EE WAS CARRYING 3 GALLONS OF WATER & TRIPPED ON TORN CARPET AT THRESHOLD OF DOORWAY FALLING & HURTING RIGHT KNEE

EE WAS OPERATING THE DOZER, HE TURNED AROUND TO BACK UP LIFTING HIS ARM, HEARD & FELT A POP DISLOCATING HIS RIGHT SHOULDER.

EE WAS IN PROCESS OF GETTING OFF A BULK TANKER TRUCK WHEN A GUST OF WIND BLEW HIS HARD HAT OFF HIS HEAD EE REACHED FOR HIS HAT, LOST HIS BALANCE & FOOTING, FALLING OFF TANKER APPROXIMATLEY 11 FT

GETTING OFF THE FORKLIFT EE STEPPED INTO A POTHOLE AND TWISTED ANKLE.

EMPLOYEE WAS WORKING IN A MAN BASKET BEING LIFTED BY A BOOM CRANE, WHEN CABLE FROM CRANE SUPPORTING MAN BASKET BROKE DROPPING BASKET AND CRANE SHEAVE BLOCK. CRANE SHEAVE BLOCK WEIGHS APPROX 4 00 LBS AND DROPPED ONTO THE MANBASKET STRIKING EMPLOYEE CAUSING INJURY.

INJURED WAS SWEEPING AND FELL BACKWRAD'S OVER A TAIL PULLY GUARD THEN FELL TO THE CEMENT. STRAINING HIS LOWER BACK.

EMPLOYEE WAS ROLLING A TRUNNION INTO A LOADER BUCKET WHEN HE CAUGHT HIS RIGHT FOREARM CAUSING A LACERATION.

EMPLOYEE WAS TRYING TO TURN A LUG NUT WHITH A LUG WRENCH WHEN THE WRENCH SLIPPED & IT HIS HIS RIGHT ELBOW.

EMPLOYEE WAS CLIMBING OFF DOZER WHEN HE SLIPPED ON DOZER TRACK, FALLING OFF HURTING HIS BACK AND RIGHT SHOULDER.

54736YEE WAS SPLITTING A PUM PCASE WITH HAMMER AND CHISEL, EMPLOYEE MISSED SHISEL AND HAMMER STRUCK DISTAL MIDDLE FINGER PART AGAINST PUMP CASE CAUSING A BRUISED FINGER.

WHILE CLEANING UP UNDER CATCHING EE SLIPPED ON STEPPIN CONCRETE PAD DONE TO COLEMAN TO PRODUCT ONE PAD.

I NAME & I NAME WERE REMOVING PINS ON LOADER BUCKET I NAME LEFT & THEN RETURNED MINUTES LATER I NAME WAS NOT AWARE OF I NAME PRESCENCEK & STRUCK AT THE PIN WITH A SLEDGE HAMMER CAUSING A PUNCH TO COME OUT WHICH HIT I NAME ON THE HEAD

HE WAS HOLDING PEICE OF METAL WHILE HE DRILLED A HOLE INIT. THE DRILL BIT BROKE AND THE DRILL HIT HIM IN THE RIGHT HAND CAUSING CUT ON TOP OF HAND HE WENT TO DR. BECUASE CUT WAS NOT HEALING R ETURNED TO WORK SAME DAY.

EMPL BLOWING CALCINER TUBE WITH AIR LANCE WHEN HOT PRODUCT BLEW BACK MAKING CONTACT WITH EMPL NECT AND RIGHT ARM.

EMPLOYE ATTEMPTED TO LIFT TIRE AAND WHEEL ASSEMBLY WHEN REMOVING TIRE FROM BELLY DUMP TRAILER AND STRAINED GROIN AREA.

EMPLOYEE WAS WORKING CLEANING OUT AN AIR COOLER WHEN HE SLIPPED ON THE LADDER HE WAS STANDING ON REACHED FOR COOLER AND CUT LEFT THUMB ON SHARP EDGE REQUIRING 3 STITCHES

EMPL GETTING OFF LOADER PLACED FOOT IN WRONG PLACE LOST HIS BALANCE AND FELL BACKWARDS ONTO HANDRAIL STRIKING TAILBONE.

EMPL WORKING IN LAB WHEN EXPLOSION OCCURRED IN CABINET AND DOOR FLEW STRIKING EMPL ON RIGHT THIGH AND CALF AREA CAUSING BRUISE.

EMPLOYEE WAS WALKING IN A HURRY AND WALKED INTO A SAMPLE BUCKET STAND CAUSING LACERATION TO UPPER RIGHT THIGH REQUIRING 9 STITCHES.

EMPLOYEE WAS TIGHTENING NUTS ON EXHAUST MANIFOLD WRENCH SLIPPED AND HIT THUMB ON RIGHT HAND

LIFTING 1X30X30INCH PLATE INTO POSITION EMPLOYEE STRAINED ELBOW WHILE LIFTING

CLIMBING STEPS-MISTUDGED STEP UP TO SPLATFORM AND FELL STRIKING LEFT KNEE.

THE EMPLOYEE WAS DISCMOUNTING THE CL-40 SKID STEES LOADER. AND SLIPPED FROM STEP POINT AND FELL STRIKING SHIN AND ANKLE.

EMP WAS ADJUSTING A FAN THAT WAS RUNNING FINGERS GOT CAUGHT IN BLADES CUTTING THEM

EMP WAS ADJUSTING A PUMP WHEN HE STEPPED DOWN FROM IT AND SLIPPED AND FELL

WHILE WORKING UNDER TRUCK EMPLOYEE SLID FROM UNDERNEATH VEHICLE ON CRIPPER AND HIT TOP OF HEAD ON PROTRUDING BOLT.

EMPLOYEE WAS GETTING ICE AND STEPPED ON ICE CUBE TWISTING ANKLE. DID NOT GO TO DR. UNTIL 9-13-83.

EMPLOYEE WAS CHANGING A TIRE AND FLIPPED IT OVER CAUSING PAIN TO RT ARM.

INSTALLING CLUTCH IN TRUCK, WHEN LIFTING STRAINED BACK AREA.

EMPLOYEE STATES THAT WHILE WORKING ON KNEES IN ELUTRAIATOR TANK HE FELT PAIN AND STIFFNESS IN RIGHT KNEE

EMPLOYEE STATES HE WAS DESCENDING FROM A PRODUCT TRUCK AND STEPPED INTO A HOLE CAUSING A TWISTING ACTION TO LEFT ANKLE

EMPLOYEE STATES HE WAS USING A LARGE HAMMER WHEN IT MISSED THE TARGET CAUSING A HYPEREXTENSION OF LEFT ARM.