citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 69 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
LEANDER CUT STONE has $5K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$5K
proposed penalties
$5K
current assessed
$5K
paid to date
$0
outstanding
25 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2004-05-24.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
LEANDER CUT STONE recorded 5.84 reportable injury cases per 100 full-time workers in 2003.
Injury rate, 2003
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
5.84
total case rate
5.84
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 3.76 and the all-US-mining average was 4.43 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 2.88 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2003 *
5.84
5.84
0.000
2002 *
0.00
0.00
0.000
2001 *
0.00
0.00
0.000
2000 *
7.14
7.14
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2004
10
2003
14
2002
13
2001
11
2000
13
Source: MSHA quarterly employment and production, updated weekly.
LEANDER CUT STONE sits in Williamson County, Texas, where the Census mining category is 0.3% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Williamson County, Texas · Population 643,889
0.3%
Mining share of county employment
$108,309
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2004 Q3
4,469
0
0
0.0
2004 Q2
6,619
2
1
302.2
2004 Q1
5,613
0
0
0.0
2003 Q4
6,967
1
0
143.5
2003 Q3
7,795
1
0
128.3
2003 Q2
10,261
0
0
0.0
2003 Q1
9,241
1
0
108.2
2002 Q4
9,531
0
0
0.0
Show 11 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2002 Q3
9,573
8
3
835.7
2002 Q2
8,309
0
0
0.0
2002 Q1
6,907
10
1
1447.8
2001 Q4
5,923
0
0
0.0
2001 Q3
6,993
2
0
286.0
2001 Q2
6,732
0
0
0.0
2001 Q1
6,372
0
0
0.0
2000 Q4
7,193
0
0
0.0
2000 Q3
6,549
0
0
0.0
2000 Q2
7,200
0
0
0.0
2000 Q1
7,065
0
0
0.0
No fatalities recorded at this mine.
Reportable incidents
8 on file
2003 · 1 incident
April 1, 2003TX · Metal/Non-Metalstone finishing and sizing personnel, stone/rock cut/polish/saw operator, splitter, cutter, trimmerHANDTOOLS (NONPOWERED)
EE WAS REMOVING STONE FROM THE JOINT SAW TABLE WITH THE MOVING BAR WHEN THE STONE SLIPPED PINNING THE FINGERS ON HIS RIGHT HAND BETWEEN THE BAR & CONCRETE FLOOR. THE TIPS OF HIS INDEX, MIDDLE & RING FINGERS WERE SEVERED AT THAT TIME.
2000 · 1 incident
September 18, 2000TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDTOOLS (NONPOWERED)
2 EE'S WERE LIFTING STONE SLABS. 2 SLABS BROKE WHILE THE EE'S WERE LIFTING THEM: THE SLABS FELLSMASHING EE RIGHT HAND. THE 3RD & 4TH FINGERS WERE CUT & 3RD FINGER REQUIRED STITCHES
1996 · 1 incident
September 7, 1996TX · Metal/Non-Metalminer, prospector, necMACHINERY
EE HAD NOT RAISED 4INCH STOVE SLAB HIGH ENOUGHT TO GET OVER THE TOP OF EXISTING SLABS ALREADY STANDING IN PLANT AREA. HE THEN BUMPED THE EXISTING SLABS IN PLAN AND THEN TO CORRECT THE MOVEMENT OF THE SLABS HE HAD ONT HE CRANE HE GRABBED THESLABS AND GOT HIS FINGER IN BETWEEN TWO OF THEN AND THEY BROKE LEAVING HIS MIDDLE FINGER ON RIGHT HAND SMASHED.
HE WAS UNLOADING BY HAND A BROKEN PIECE OF STONE WHICH HAD FALLEN FROM HIS SAW CART TO THE FLOOR. AS HE PICKED IT UP AND TURNED TO WALK WITH IT, HE BUMPED HIS HEAD ON THE LOWER PULLEY GUARD.