Lilesville Pit & Plant Metal/Non-Metal

EE was sliding hand down a wooden bedrail of a truck when EE got a large splinter under right thumb nail. EE could not get the splinter out and was taken to get it removed making this MSHA reportable.

EE was walking around a pallet when EE tripped on the corner of it. EE left ankle started hurting, EE reported it to EE's supervisor. EE said EE thought it would be ok when asked. EE came to work on 1/27/2023 and ankle wasn't any better, EE was instructed to go to urgent care and have it looked at.

EE was walking out of the surge tunnel as another EE had thrown a rock into the tunnel. The rock that was thrown hit the EE in the mouth causing the EE a laceration to the lip requiring stitches making the accident reportable.

EE was removing a guard from the No. 2 conveyor. The guard would not come loose. When the guard finally came loose, it pinched the EE's thumb causing a fracture. The EE did not feel the need to go to the doctor until 11/18/2021.

EE was tightening the packing on a slurry pump. The wrench slipped causing EE's hand to hit the main frame of the pump. The top of the little finger on the right hand was cut, requiring 2 stitches.

EE was standing on the tracks of the trackhoe and heard a pop around right knee. After that EE felt pain for the remainder of the day. There was no action that caused the pain (i.e. falling, stepping, stumbling, tripping). The ee was merely standing and talking and felt/heard the pop. EE has been written out of work.

EE was pulling the gate closed at the entrance at the end of the day. EE was pulling the gate behind self and the gate caught the back of EE's foot, causing EE to fall backwards. EE's foot swelled up and EE ended up having a small fracture in the foot.

The EE was helping to take batteries out of a haul truck. Employee got the batteries out, twisted to put the batteries on a truck and felt a pain in the lower back. Employee was taken to the hospital. Employee suffered a lower back strain.

EE was operating forklift repairing roads after Hurricane Michael. EE hit a small pothole/sinkhole in the road that they backed away from, and said their neck hurt. EE went to the doctor to get checked out. The doctor said nothing was wrong with them, but wrote them out of work during the next shift due to soreness. This makes the accident reportable.

On 09/17/2018, The superintendent came into the plant after Hurricane Florence had subsided. EE noticed that the Railroad pond impoundment had breached. This was at 6:57 am. We immediately called the MSHA hotline and reported the failure. There were no injuries due to the failure of the impoundment.

EE was cutting a piece of thick skirt rubber with a box cutter. The box cutter slipped and cut thumb on ee left finger, requiring three stitches, thus making the accident reportable.

EE was helping to change a media panel in the #4 screen. The EE was squatted down and pushing it in place. The EE either twisted or turned wrong and could not move. EE felt a pain on the left side. The pain got worse and EE had to go to the doctor. The EE has missed time from work. They think it is a severely pulled muscle, but no definite diagnosis yet.

EE was helping to change take up pulley. Hoist broke and pulley/EE fell. Pulley hit the EE in the right hand/thigh, and across the chest. EE was taken to the doctor and released, no restrictions. On 6/8/17, EE came to work and complained of chest hurting, went back to doctor, and doctor wrote EE out of work until 6/12/17. EE missed 6/9/17, thus making accident reportable.

EE was assisting in removing rebuilt screen from shop. While pulling screen from shop, back of screen got stuck on nut welded to the rail on floor. They put a piece of angle under screen to lift up on it, when screen came loose from the nut and angle hit ee in left foot causing a severe bruise. Doctor restricted duty, therefore reportable.

EE was hammering some rust off of some metal in a bin in which he was getting ready to repair. While hammering, some type of debris got in his eye (he was wearing safety glasses), and extremely irritated left eye. Went to doctor, but there was no debris in eye, just irritated. Doctor gave prescription ointment for eye, thereby making it reportable.

EE was placing concrete forms on a pallet when one 2'x4' section slipped and hit his left leg. Doctor initially said was just bruised and to come back in one week. The next day the EE's leg was severely swollen and went to ER. Doctor said he had severed blood vessel in leg. Had to do surgery on 7/19/2012 to relieve pressure. EE will be out-of-work for 6-8 weeks.

EE was changing oxygen bottle on maintenance truck. EE stumbled, fell and dropped the oxygen bottle on left leg. At that time EE said he was fine. Due to swelling and pain, the EE decided to go to the doctor on 9/14/2010, the doctor wrote him out of work due to the condition, thereby making the accident reportable. The EE did not miss any work until 9/15/2010.

EE was adjusting valves on the 111M Marion Dragline and removed his hard hat to look at the dial indicator. He raised his head and struck a bracket above, causing a laceration approximately one inch in length on the top of his head. The laceration required 5 stitches, thereby making this accident reportable.

EE was removing bolt from Sheave while in a vice. The EE pulled on the bolt with a wrench, the sheave slipped in the vice and pinched the EE's left small finger between the sheave and the vice.

EE was walking through the office when she caught her foot on a rug on the floor. As she tripped, she hit just above her right eye on the door facing, causing a laceration requiring three stitches.

EE was driving haul truck approaching dump hopper. Operator in a 988 CAT Loader backed around surge pile and backed into front side of Euclid.

While checking the oil level in the waste oil tank, the employee stepped onto an engine holder stored under the tank. When he stepped up with his right foot, he slipped, hitting his left arm on the tank and then catching himself with the same hand on the way to the ground.

While repositioning a piece of steel tubing int he bankd saw air vice. the ee finger was mashed between the vice jaw and the piece of steel tubing he was holding.

WHILE CHECKING THE CLUTCH ON TRANSMISSION AFTER REMOVING THE INSPECTION PLATE, THE EMPLOYEE LOOKED INTO THE CLUTCH & DEBRIS BLEW INTO HIS LEFT EYE.

WHILE TRAVELING TO THE PIT TO BE LOADED, THE DRIVER OPENED THE WINDOW; DUST BLEW IN HIS EYES. THE EUCLID TURNED TO THE RIGHT AND DROPPED INTO THE DRAIN DITCH CAUSING HIS RIGHT SHOULDER TO HIT THE RIGHT SIDE OF CAB AND WINDOW.

The employee was cutting a bolt off of #4 screen. The torch was leaking at a loose fitting. The fitting ignited burning his right wrist. The injury was not reported until 3-21-05.

THE EE WAS TRANSPORTING THE JACK SHAFT FROM THE TRUCK TO THE DREDGE. HE SET THE SHAFT ON THE HAND RAIL TO TRANSFER IT TO THE BOAT. HIS FINGER WAS PINCHED BETWEEN THE SHAFT AND THE HAND RAIL, CUTTING HIS FINGER.

WHILE SETTING BLOCKS INTO POSITION WITH CRANE, THE BLOCK BEGAN TO SWING AWAY. THE EE TRIED TO STOP THE BLOCK AND INJURED HIS LOWER BACK. THE EE CONTINUED TO WORK AND REPORTED THE INJURY ON 10- 2-03 TO THE SUPERINTENDENT. THE EE WAS SENT TO THE DOCTOR ON 10-03-03 AND RETURNED TO WORK.

CUSTOMER TRUCK DRIVER EXITED HIS TRUCK WHILE ON THE SCALES. HE TRIPPED AND FELL ONTO THE SCALES.

EE SLIPPED WHEN CLIMBING DOWN FROM THE D7 DOZER AND TWISTED HIS LEFT KNEE. NOTE: THE EE RETURNED TO WORK WITH NO RESTRICTIONS OR LOST TIME UNTIL 4-14-03.

WHILE REMOVING A BOLT FROM P-9 CONVEYOR THE EMPLOYEES FINGER BECAME CAUGHT BETWEEN THE WRENCH IN HIS LEFT HAND WHILE PULLING THE RATCHET IN HIS RIGHT HAND.

WHILE USING THE AIR WRENCH TO TIGHTEN BOLTS ON DOZER BLADE, THE EMPLOYEE'S FINGER WAS CAUGHT BETWEEN THE SOCKET AND BASE OF THE IMPACT WRENCH, CUTTING THE TIP OF HIS MIDDEL FINGER ON HIS LEFT HAND.

EE WAS HELPING TO CLEAN UP ROCK UNDER A CONVEYORHE SAYS HE INJURED HIS LEFT SHOULDER USING A PICK TO BREAK LOOSE ROCK BETWEEN THE WALL & CONVEYOR THE INJURY WAS NOT REPORTED TO THE SUPERINTEND ANT UNTIL 5/30/02

EMPLOYEE WAS STANDING IN COLLECTION BOX SHOVELING ROCK OUT OF IT, LEFT THUMB GOT CAUGHT BETWEEN SHOVEL HANDLE AND SAND PIPE CUTTING LEFT THUMB.

WHILE STEAM CLEANING THE D-7 DOZER, THE STEAM CLEANING HOSE BECAME ENTANGLED ON THE DOZER BLADE, CAUSING THE EE TO LOSE CONTROL OF THE WAND AND SPRAYING HIS RIGHT FOOT AT THE BOOT LACES, HOT W ATER ENTERED HIS BOOT BURNING HIS ANKLES.

EE WAS HOLDING PIN IN PLACE, WHILE OTHER WAS DRIVING PIN INTO BUCKET BOSS WITH A SLEDGE HAMMER. OTHER STRUCK EE'S HAND.

EE WAS ATTEMPTING TO PUT FUEL IN MOTOR GRADER WHEN HE FELL OFF THE GRADER.

EMPLOYEE WAS HELPING CHANGE TIRE ON B70 EUCLID. HE WAS BRUSHING LOOSE DIRT FROM INSIDE WHEEL RIMWHEN HE CUT HIS FINGER ON A STEEL BAR MOUNTED ON TIRE RIM.

THE EE WAS MOVIG A DREDGE BY PULLING A ROPE ATTACHED TO A CABLE. HE PULLED A MUSCLE IN HIS NECK SHOULDER & ELBOW. NOTE: EE MISSED WORK ON 10/6 WHEN HE RECD MED TREATMENT THIS WILL BE LOST TIME EE NOT BACK TO WORK AS OF 10/20/99

SLIDING A PIECE OF STEEL ONTO THE FORKS OF THE FORKLIFT WHEN IT OVERTURNED & MASHED HIS FINGER BETWEEN THE TWO PIECES OF STEEL.

TRIPPED AND FELL ON CATWALK - MISSED STEO SKINNED RIGHT KNEE, BRUISED BOTH KNEES AND DEVELOPED FLUID ON THE KNEE.

REMOVING TOOTH POINT SHANK FROM 988 LOADER BUCKET--HIT SHANK WITH SLEDGEHAMMER & A PIECE OF STEEL FROM SHANK FELW OFF & LODGED IN HIS LEFT THIGH.

EMPLOYEE HAD A PIPE UNDER BELLY PAN OF 988 LOADER. A FLOOR JACK AND BLOCK WAS HOLDING THE PAN. A HELPER REPOSITIONED THE JACK THE INJRUED EKMPLOYEE WAS UNABLE TO HOLD THE PAIN AND IT CAME DO WN AND MASHED HIS FINGER BETWEEN PIPE AND FLOOR.

REMOVING DRIVE SHAFT ON 988 CAT LOADER. WRENCH SLIPPED & HAND HIT THE LOADER FRAME. CUT RIGHT THUMB REQUIRING 8 STITCHES.

EMPLOYEE WAS SEATING A BUSHING IN A LOADER ARM BY HITTING A METAL PLATE WITH A SLEDGE HAMMER. THE PLATE WAS ON TOP OF A PIN THAT WAS ON TOP OF THE BUSHING. HE HIT THE PLATE OFF CENTER CAUSING IT TO FLIP END OVER END INTO THE AIR. THE PLATE CAME DOWN ON HIS HEAD CAUSING A CUT.

EMPLOYEE WAS OPERATING CAT 988 LOADER WHEN HE STUCK HIS HAND INTO THE FAN VENT IN THE ROOF OF THE CAB TO DETERMINE IF THE FAN WAS WORKING.

EE WAS CLEANING OUT STOPPED UP BOX AT TOP OF #1 SCREEN. HIS HAND WAS CUT BETWEEN SHOVEL HANDLE & METAL PLATE INSIDE OF BOX

EE WAS SITTING IN HAUL TRUCK BEING LOADED WITH A DRAGLINE. THE DRAG BRAKE FAILED TO HOLD THE BUCKET, WHICH HIT THE FENDER OF THE TRUCK & KNOCKED THE DRIVER OUT OF THE SEAT. DRIVER INJURED HIS HIP.

EMPLOYEE WAS MOUNTING A DRAGLINE AFTER GREASING A DUMP SHIEVE. HE WAS STANDING ON THE TRACKS STEPPING ONTO THE CATWAL WHEN HIS LEFT KNEE LOCKED UP.

EE HAD BEEN WELDING ON DRAGLINE BUCKET IN SHOP AND WHILE ATTEMPTING TO REMOVE SLAG THAT HAD BEEN CHIPPED AWAY, HE BLEW SLAG INTO HIS EYE WITH AN AIR HOSE.

EE WAS PUSHING A STUCK EUCLID WITH A RUBBER TIRED DOZER. THE DOZER BLADE GOT STUCK UNDER REAR BUMPER OF EUCLID & IT CAUSED THE REAR OF THE DOZED TO BE LIFTED OFF THE GROUND. WHEN THE BLADE REL EASED THE DOZER CAME DOWN WITH A JAR WHICH INJURED HIS BACK. HE DID NOT SEE A DOCTOR UNTIL 1/27/97. OPERATION 6/3/97.

EMPLOYEE HAD SHAFT AND REDUCER BLANCED ON WORK STAND AND ATTEMPTED TO HOOK THE OVERHEAD TO IT. SHAFT STARTED TO FALL AND HE TRIED TO CATCH IT. THE FLANGE ON THE END OF THE SHAFT HIT HIS ARM AND CUT IT. REQUIRING SIX STITCHES.

EMPLOYEE WAS CHOCKING HIS HAUL TRUCK TO PUMP UP A TIRE. THE WOODEN CHOCK BLOCK SLIPPED AND HE GOT A SPLINTER IN HIS FINGER. THE SPLINTER HAD TO BE CUT OUT REQUIRING 5 STITCHES.

EE WAS ASSISTING WITH THE LOADING OF A 15HP ELECTRIC MOTOR INTO THE BUCKET OF A BOBCAT LOADER. HE HAD HIS LEFT HAND ON THE MOTOR SHAFT WHEN IT SHIFTED, PINCHING HIS FINGER.

EE WAS ATTEMPTING TO THROW THE GATE TO CHANGE THE DIRECTION OF MATERIAL DISCHARGING FROM LOADOUTSCREEN. THE GATE WOULD NOT SHUT PROPERLY & HE CUT HIS FINGER ON THE SCREEN SPRING BRACKET AS HE TRIED TO FORCE THE GATE HANDLE CLOSED.

EE WAS USING A TORCH TO CUT AWAY OLD WELD ON 245 BASE. HOT SLAG FELL INTO HIS BOOT. 3RD DEGREE BURN ON RIGHT ANKLE. INFECTION 2 1/2 WEEKS LATER.

EE AND ANOTHER EE WERE ATTEMPTING TO REMOVE THE REDUCER FROM SAND CONVEYOR HEAD PULLEY. THEY WERE EXCERTING DOWNWARD PRESSURE WITH A 5 FT BAR, WHEN THE BAR SLIPPED. BOTH MEN LOST THEIR BALANCE AND FELL AGAINST THE HAND RAIL. EE BEING ON THEBOTTOM, BROKE SEVERAL RIBS.

EMPLOYEE WAS ENTERING INTO MATERIALS LAB HIS ANKLE GAVE WAY CAUSING HIM TO FALL NO TRIPPING HAZARD EMPLOYEE APPARENTLY TRAPPED HIMSELF

EMPLOYEE WAS DRILLING A 1/2" HOLE IN A FLATTENED COPPER PIPE TO MAKE A LUG FOR A WELDING CABLE. DRILL BIT HUNG IN HOLE, TWISTING CABLE AND CUTTING HIS LEFT THUMB.

EMPLOYEE HAD BEEN SHOVELING ROCK FROM THE FLOOR ON TO THE CONVEYOR BELT IN THE ROCK TUNNEL. WHEN HE FINISHED HE REPORTED A PAIN IN HIS BACK.

EE CAUGHT FINGER BETWEEN HORRIZONAL GRAB IRON LOCATED ON LEFT SIDE OF SEAT AND THE SEAT BELT BRACKET MOUNTED ON SEAT FRAME WHEN HE ATTEMPTED TO DISMOUNT. THE SEAT WAS DEPRESSED BY HIS BODY WEI GHT AND RAISED UP CATCHING HIS FINGER AS HE WAS GETTING UP.

STANDING ON DRILL BAR BECAME UNSTUCK HE JUMPED ON GROUND

EMPLOYEE WAS ATTEMPTING TO GUIDE A SCREW AUGER WHICH WAS SUSPENDED FROM A CHAN UNDER SOME BEAMS INTO THE FINE MATERIAL CLASSIFIER TANK AS HE WAS PUSHING DOWN ON TOP OF THE AUGER GUIDING IT UND ER THE BEAM IT SWUNG UPWARD MASHING HIS FINGER BETWEEN THE AUGER & THE BEAM

AS EE WAS MOVING A RAILCAR UNDER A CONEYOR BELT HE HIT HIS HEAD ON THE CONVEYOR FRAME.

EMPL FELL IN BREAK ROOM BUT DIDNT REPORT IT FOR 2.5 WEEKS.

EMPLOYEE WA HELPING DIRLL TEST HOLES WITHT EH CALDWELL DRILL. THE KELLY CLUTCH SLID DOWN QUICKLY BEFORE HE COULD PULL HIS HAND AWAY & CAUGHT HIS FINGERS BETWEEN TE YOKE AND METAL DRILL DECK.

EMPLOYEE WAS TRANSFERRING MATERIL FROM AN EVELATED PILE WIT H A DRAGLINE AS HE WAS WORKING WITH A LOADED BUCKET ABOVE THE MACHINE HE OVERSWUNG THE BUCKET CAUSING THE HOIST CABLE TO BE AT A MOR E SEVERE ANGLE THAN PERPENDIEULAR THE CABLE GOT AGAINST THE GUARD BREAKING IT OFF GUARD FELL INTO THE CAB WINDOW HITTING THE OPERATOR

HAUL TRUCK DRIVER-FOREIGN BODY IN EYE DRIVER DOES NOT RECALL HOW OR WHEN OBJECT GOT INTO EYE.

DISMOUNTING FROM WORKING ON BOOM (TIH CYLINDER) OF CAT 966 LOADER- STEPPED ON END OF UNSECRURED BLOCK OF WOOD USED TO PREVENT BUCKET FROM ROLLING INWARD. SLIPPED & FELL BETWEEN BUCKET & FRONT TIRE. ARM CAUGHT ON TIRE CAUSING TORN MUSCLES & LIGIMENTS.

REPLACING HOOD OF EUC, ALIGNING BOLTS SOME OLD FOAM INSULATIN THAT HAD BEEN UNDER FLAKED OFF GOT IN EYE

EMPL OVEREXERTED PUSHING ON 24"PIPE WRENCH INSTALLING WATERLINE AT OFFICE.

EMPLOYEE WAS INSTALLING AN OVERHEAD FAN ABOUT TWO DAYS AFTER HE HAS HANDLED SOME HEAVY SYNTRON FEEDER MAGNETS. HE FELT A TIGNLING IN ARM & SOME NUMBNESS OF RING FINGER.

EMPLOYEE WAS MOUNTING A SPLIT PULLEY ON AN AIR COMPRESSOR SHAFT. HE HAD DRIVEN A CHISEL INTO THE SPLIT TO INLARGE THE OPENING AND AS HE WAS TAPPING THE PULLEY ONTO THE SHAFT, THE CHISEL FELW OUT STRIKING HIM IN THE CHIN.

EMPLOYEE WAS HELPING A MECHANIC KNOCK A BEARING OUT OF THE FRONT WHEEL OF B70 EUCLID EMPLOYEE WAS HOLDING A BAR AS THE MECHANIC STRUCK IT WITH A LARGE HAMMER THE BAR SLIPPED AS IT WAS STRUCK & CAUGFHT THE EMPLOYEES FINGER BETWEEN BAR & WHEEL

OPERATOR WAS MOUNTING HIS DRAGLINE TO WORK ON REPAIRS. FOOT SLIPPED AS HE WAS PULLING HIMSELF UP ON TRACK. HIS BACK HIT TRACK, CAUSING DISCOMFORT. HE CONTINUED WORKING 2 1/2 HOURS TO END OF SH IFT, BUT DID NOT REPORT FOR NEXT SHIFT. HE DID NOT SEEK MEDICAL ATTENTION.

EMPLOYEE WAS CLIMBING LADDER ON SIDE OF RAIL CA RIN ORDER TO REACH THE BRAKE. HIS FOOT SLIPPED ON RUNG, CAUSING HIS WEIGHT TO BE SUPPORTED BY HIS ARMS.

WHILE CLEANING DRIED PAINT FROM A PAINT GUN WITH A POCKET KNIFE,INJURED PERSON LET HIS KNIFE SLIP AND CUT HIS LEFT HAND.

WHEN REMOVING A CROSSTIE FROM UNDER A DREDGE THAT HAD BEEN SITTING ON IT, THE CROSS TIE SLIPPED FROM INJURIED PERSONS HAND AND SLID ACROSS HIS RIGHT FOREARM PUSHING A SPLINTER INTO GAME.

WHILE ATTEMPTING TO MOVE WINCH LINE THAT WAS SECURED TO ANOTHER CABLE SO IT COULD BE MOVED ALONG THAT CABLE EMPL POSITIONED HIMSELF ON WRONG SIDE OF CABLE. WHEN EMPL LOSSENED CLAMP HOLDING WIN CH LINE IT SLID ALONG OTHER CABLE HITTING EMPL OVER RIGHT EYE.

INJURED WAS WORKING AFTER DARK & IN THE RAIN ON A CONVEYOR DRIVE PULLEY. WHEN HOLDING A BAR TO DRIVE A BEARING ONTO THE PULLEY SHAFT INJURED WAS STRUCK ON THE RIGHT HAND WITH A HAMMER.

WHEN PLACING A CABLE ON A DRAGLINE THE CABLE FLIPPED THROUGH THE GROUND. SAND WAS TOSSED IN THE FACE OF THE OPERATOR, GETTING SAND IN HIS EYES.

RAGLINE OPERATOR WAS REPLACING FAIRLEGED ROLLERS ON DRAGLINE WHEN ONE OF THE ROLLERS SLIPPED FROM HIS GRASP FALLING ACROSS HIS RIGHT ARM.

EMPLOYEE FELL FROM RAIL CAR WHEN GRAB IRON HE WAS STANDING ON BROKE.

A HELPER WAS GRINDING A JOINT BEHIND THE EMPLOYEE. A PIECE OF METAL RICOCKETED AT AN ANGLE AND ENTERED RIGHT EYE. TREATMENT INCLUDED REMOVING EMBEDDED PARTICLE AND PRESCRIPTION MEDICATION.

EMPLOYEE WAS INSTALLING A WAER PLATE USING A WELDER. DID NOT LOWER HIS HELMET OVER FCE AND EYES SOON ENOUGH.

EMPL WAS CHAINGING CUTTING EDGES & SLIDES ON BLADE OF 814 DOZER WHILE HOLDING SLIDE IN PLACE TO PUT BOLT INTO PLACE SLIDE FELL & MASHED HIS FINGER.

EMPLOYEE WAS ATTEMPTING TO CLOSE A RAIL CAR DOOR AS HE PULLED ON THE STEEL BAR HE FELT HISS BACK POP NOTE ACCIDENT NOT REPORTED UNTIL THE FOLLOWING MONDAY ON RETURN TO WORK

EMPLOYEE PULLED3A STEEL ROD FROM THE STORAGE RACK IN THE SHOP & A SECOND PIECE FELL ON HIS RT. FOOT

EMPLOYEE WAS HE5PING TO DRAG A TOW CABLE USED TO PULL A DOZER THAT WAS STUCK EMPLOYEE CONTINUED TO WORK FOR ABOUT 3 WEEKS BEFORE REPORTING INJURY

EMPLOYEE WAS DR3VING COLLAR OFF A BRAKE SHAFT WITH A HAMMER WHEN A PIECE OF THE COLLAR CHIPPED OFF AND STRUCK HIS UPPER LIP.

EMPLOYEE WAS RE1AIRING VALVES WHEN FORIGN OBJECT (SAND GRAIN) ENTERED EYE.

PUTTING ELECTRI7 MOTOR IN STORAGE IN SUPPLY RM WITH BOBCOAT LOADER. MOTION WAS PLACED ON FLOOR AND PUSHED IN PLACE BY HOLDING A BOARD NEXT TO LOADER BUCKET I NAME REPOSITIONING THE BOARD WHEN LOADER LUNGED 0ORWARD AND MASHED HIS FINGERS BETWEEN LOADER BUCKET AND BOARD.

EMP WAS RELEASI3G BRAKE ON RAIL CAR. THERE AS TOO MUCH SLACK IN CHAIN AND LEVER ON BRAKE HOUSING WAS IN WRONG POSITION TO PICK UP SLACK IN CHAIR IN TIME TO STOP THE CAR FROM HITTING THE CA IN FRONT. EMP J6MPED MOVING CAR AND SPRAINED HIS LEFT ANKLE

EMPL MASHED LIT7LE FINGER WHEN HE UNHOOKED A CLEVIS ATTACHED TO TWISTED CABLE.THE CABLE FLIPPED AROUND AND MASHED FINGER AGAINST PIPE BEING PULLED OUT OF THE GROUND.

EMPLOYEE WAS GA7HERING WOOD FOR SHOP HEATER WHEN HE STEPPED INTO A NEST OF FIRE ANTS AND WAS STUNG SEVERAL TIMES ON LEGS.

I NAME WAS CLOS3NG RAG CAR DOOR.IT WAS RAINING SWHICH MADE THE BAR AND RIG DOOR SLIPPERY.THE BAR SLIPPED MASHING RIGHT LITTLE FINGER AGAINST CAR.

EE WAS USING HO8E TO WASH UP GRAVEL SPILLAGE OF A SUPPORT. HOSE GOT CAUGHT ON SUPPORT- IN AN EFFORT TO FREE HOSE SAID HE STRAINED BACK. EE DID NOT GO TO THE DOCTOR FOR THE NEXT 2 DAYS. THE NEXT 2 DAY8.

EMPLOYEE WAS L3FTING A GEAR OUT OF A REDUCER HOUSING AND STRAINED BACK

I NAME WAS REPA3RING PART FOR PUMP THE PART HAD A RUBBER STEEL ON IT AND IT WAS NECESSARY TO SLIT TO REMOVE.KNIFE SLIPPED AND CUT LEFT THUMB WHICH REQUIRED 3 STITCHES.

EE WAS CLIMBING3UP ON DRAGLINE WHEN HIS FOOT SLIPPED OFF THE STIRRUP STEP CAUSING HIM T O FALL AND BRUISE HIS RIGHT LEG.

EE LIFTING CONV9YOR BELT ONTO ROLLERS WHILE ON CONVEYOR CATWALK.HIGH WIND CAUGHT BELT AND EE STRAINED HIS BACK WHILE TRYING TO HOLD ONTO THE BELT.

EE WAS PICKING 6P A RAILROAD CROSS TIE & CAUSED A PINCHED NERVE IN HIS BACK

R/R CAR ROLLED OVER EE FOOT ON TRACKS AT SCALE HOUSE WHERE LOADED CARS ARE WEIGHED PRIOR TO SHIPMENT. FACTS NOT ACCURATE AT PRESENT BECAUSE NO WITNESS. EE WAS APPARENTLY ATTEMPTING TO RELEASE COUPLING WHEN AMPUTATION OCCURRED.

ATTEMPTED TO PUSH BLADE OF SWITCH INTO CONTACT WITH AN INSULATED SCREWDRIVER. THE SWITCH SHORTED AND CAUSED FLASH BURN TO THE FACE, EYES AND LEFT WRIST OF EMPLOYEE.

AN INSECT FLEW INTO WINDOW OF TRUCK, STRIKING EE IN THE EYE.

EE WAS ROLLING A ROLLER ALONG THE FLOOR IT BECAME UNBALANCED AND TIPPER OVER HE GRABBED IT CATCHING HIS FINGER BETWEEN THE ROLLER AND FRAME

WAS REMOVING AN OLD CHUTE & INSTALLING A NEW ONE AND IN TAKING A SHORT CUT HE CARELESSLY STEPPED INTO A TROUGH AND HIS FOOT SLIPPED THUS CAUSING HIM TO FALL AND CRACKING ONE RIB

EE WAS WELDING AND CUTTING ON A PLANT CONVEYOR AND REMOVED HIS SAFETY GOGGLES THEN A PARTICLE OF METAL SLAG POPPED INTO HIS EYE

EE WAS BRINGING DOWN RAIL CAR TO BE LOADED AND STRAINED A GROIN MUSCLE WHILE PULLING ON THE CAR BRAKE.

EMP WAS HELPING INSTALL NEW WIRE SCREENS ON THE REVOLVING SCREEN HE SLIPPED AND FELL INTO THE REVOLVER AREA WHILE HELPING WITH REPAIRS