Employee was drilling shot holes when an air operated ram for holding the steel broke. The employee stopped drilling, moved the drill, and exited the cab. The broken part fell approximately ten feet, striking the employee on the hard hat and nose. The employee received cuts requiring two stitches.
Lounder Mine & Bare #2 Mine: 17 MSHA citations Coal
Lounder Mine & Bare #2 Mine has $3K in proposed MSHA penalties and $0 outstanding across 2 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Lounder Mine & Bare #2 Mine.
- Fatalities
- 0
- Total incidents
- 2
- Years on record
- 2011–2015
- Latest incident
- May 2015
Compliance record
MSHA citations since 2010
17
citations
8
significant & substantial
$2,658
proposed penalties
$2,531
paid to date
95% of proposed penalties paid to date, a $127 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2010
19
inspections on record
387
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 387 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Lounder Mine & Bare #2 Mine has $3K in proposed MSHA penalties and $0 outstanding across 2 contested dockets.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$3K
proposed penalties
$3K
current assessed
$3K
paid to date
$0
outstanding
16 assessments are final orders; 2 contested dockets.
Of $734 in penalties contested before the Commission, $607 was upheld in final decisions.
As of the most recent assessment on 2016-01-05.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.50.0%
significant & substantial
0.0%
high negligence or reckless
50.0%
reasonably likely or greater
37.5%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 37.5% low, 62.5% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
2
citations taken to the federal commission · 12% of citations on record
- Settled 2 · 100%
100%
S&S designation survived the contest
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.of 1 decided S&S contests · industry: 79%
17%
Penalty reduction in decided contests
$734 proposed, $607 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2016-04-26.
Contested penalties
ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| PENN 2014-35 | Settlement | Andrews | 2014 | $634 → $507 |
| PENN 2016-0205 | Settlement | Lewis | 2016 | $100 → $100 |
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
MSHA sampling at Lounder Mine & Bare #2 Mine shows 98% of 59 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2015-12-30, 10 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.98%
within 1.5 mg/m3
59
samples
2.91
dust max (mg/m3)
1
over MSHA ECV
ⓘ
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.46 samples taken by MSHA inspectors, 13 by the operator.
Most-sampled occupations
- BULLDOZER OPERATOR27
- BACKHOE OPERATOR11
- HIGHLIFT OPERATOR/FRONT END LOADER6
Silica (quartz)
Last sampled: 2015-11-09, 10 years ago9.3
silica avg (%)
4
samples
10.1
silica max (%)
Most-sampled occupations
- BULLDOZER OPERATOR4
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2015-11-02, 10 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.0%
over PEL
37
samples
Most-sampled occupations
- BULLDOZER OPERATOR15
- BACKHOE OPERATOR8
- HIGHLIFT OPERATOR/FRONT END LOADER5
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust by year
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2015 | 96% | 23 |
| 2014 | 100% | 10 |
| 2013 | 100% | 8 |
| 2012 | 100% | 8 |
| 2011 | 100% | 7 |
| 2010 | 100% | 3 |
Silica (quartz) by year
| Year | silica avg (%) | samples |
|---|---|---|
| 2015 | 8.6 | 1 |
| 2012 | 9.6 | 3 |
Noise by year
| Year | over PEL | samples |
|---|---|---|
| 2015 | 0% | 11 |
| 2014 | 0% | 5 |
| 2013 | 0% | 7 |
| 2012 | 0% | 7 |
| 2011 | 0% | 7 |
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Lounder Mine & Bare #2 Mine recorded 0.00 reportable injury cases per 100 full-time workers in 2015.
Injury rate, 2015
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.76 and the all-US-mining average was 2.72 cases per 100 workers.
In Pennsylvania, coal mining averaged 3.79 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2015 * | 0.00 | 0.00 | 0.000 |
| 2014 * | 0.00 | 0.00 | 0.000 |
| 2013 * | 0.00 | 0.00 | 0.000 |
| 2012 * | 0.00 | 0.00 | 0.000 |
| 2011 * | 4.21 | 4.21 | 0.000 |
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
- Mulligan Mining, Inc. 2010 to 2013
- S & K Energy Inc. 2013 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2016 | 10 | 1,352 |
| 2015 | 10 | 443,114 |
| 2014 | 9 | 126,868 |
| 2013 | 15 | 98,968 |
| 2012 | 20 | 120,082 |
| 2011 | 18 | 141,155 |
Source: MSHA quarterly employment and production, updated weekly.
Lounder Mine & Bare #2 Mine sits in Washington County, Pennsylvania, where the Census mining category is 1.9% of county employment.
Local economic context
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.Washington County, Pennsylvania · Population 209,778
1.9%
Mining share of county employment
$77,487
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.Citations per million employee-hours, as reported to MSHA
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2016 Q1 | 1,000 | 2 | 0 | 2000.0 |
| 2015 Q4 | 6,520 | 2 | 0 | 306.7 |
| 2015 Q3 | 6,845 | 0 | 0 | 0.0 |
| 2015 Q2 | 7,005 | 0 | 0 | 0.0 |
| 2015 Q1 | 6,900 | 0 | 0 | 0.0 |
| 2014 Q4 | 5,742 | 1 | 1 | 174.2 |
| 2014 Q3 | 6,158 | 1 | 1 | 162.4 |
| 2014 Q2 | 6,420 | 0 | 0 | 0.0 |
Show 13 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2014 Q1 | 6,264 | 0 | 0 | 0.0 |
| 2013 Q4 | 12,500 | 2 | 2 | 160.0 |
| 2013 Q3 | 15,198 | 0 | 0 | 0.0 |
| 2013 Q2 | 12,096 | 0 | 0 | 0.0 |
| 2013 Q1 | 730 | 0 | 0 | 0.0 |
| 2012 Q4 | 5,180 | 0 | 0 | 0.0 |
| 2012 Q3 | 15,871 | 0 | 0 | 0.0 |
| 2012 Q2 | 2,044 | 2 | 0 | 978.5 |
| 2012 Q1 | 2,325 | 0 | 0 | 0.0 |
| 2011 Q4 | 14,270 | 0 | 0 | 0.0 |
| 2011 Q3 | 11,870 | 2 | 2 | 168.5 |
| 2011 Q2 | 11,850 | 0 | 0 | 0.0 |
| 2011 Q1 | 9,553 | 1 | 0 | 104.7 |
No fatalities recorded at this mine.
Reportable incidents
2 on file2015 · 1 incident
S & K Energy Inc. · Struck by falling object
2011 · 1 incident
September 19, 2011
PA · Coal
haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver
SLIP OR FALL OF PERSON
Mulligan Mining, Inc. · Over-exertion (Not Elsewhere Classified)
End of shift employee was getting out of Volvo Rock Truck, coming down steps, holding on to hand rail, thought ground was close and jumped backwards while hanging onto the hand rail injuring right shoulder.