INJURED WAS ADJUSTING CLUTCH ON FEEDER. FEEDER HAD STOPPED BUT BECAUSE OF EXEENTRIC IT STARTED AGAIN. INJURED HAD FOOT ON BULL GEAR HE PINCHED FOOT BETWEEN BULL GEAR AND BEARING HOUSING.
Madden Boonville Fitch Plant: 9 MSHA citations Metal/Non-Metal
Madden Boonville Fitch Plant has $742 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Madden Boonville Fitch Plant.
- Fatalities
- 0
- Total incidents
- 10
- Years on record
- 1985–1990
- Latest incident
- Aug 1990
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Madden Boonville Fitch Plant has $742 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2003-04-02, 23 years ago
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.- Respirable dust, <.1mg2
- Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (3)
| Date | Contaminant | Concentration | Limit | Conc / limit | Occupation |
|---|---|---|---|---|---|
| 2003-04-02 | Unlisted Particulate, respirable, <1% Qtz | 0.39 | Truck Driver | ||
| 2003-04-02 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2003-04-02 | Respirable dust, <.1mg | 0 | Front-end Loader Operator |
- Eastern Rock Products Inc 1950 to 1988
- Hanson Aggregates New York Inc. 1988 to 2006
- T.J. Madden Construction Co., Inc. 2006 to present
| Year | Employees |
|---|---|
| 2007 | 0 |
| 2006 | 1 |
| 2004 | 1 |
| 2003 | 3 |
| 2002 | 1 |
| 2001 | 3 |
| 2000 | 2 |
Madden Boonville Fitch Plant sits in Oneida County, New York, where the Census mining category is 0.1% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2007 Q3 | 0 | 0 | 0 | |
| 2007 Q2 | 0 | 1 | 0 | |
| 2007 Q1 | 0 | 0 | 0 | |
| 2006 Q4 | 441 | 0 | 0 | 0.0 |
| 2006 Q3 | 533 | 3 | 0 | 5628.5 |
| 2004 Q3 | 15 | 0 | 0 | 0.0 |
| 2004 Q2 | 47 | 0 | 0 | 0.0 |
| 2004 Q1 | 8 | 0 | 0 | 0.0 |
Show 16 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2003 Q4 | 32 | 0 | 0 | 0.0 |
| 2003 Q3 | 167 | 0 | 0 | 0.0 |
| 2003 Q2 | 1,203 | 3 | 0 | 2493.8 |
| 2003 Q1 | 59 | 0 | 0 | 0.0 |
| 2002 Q4 | 143 | 0 | 0 | 0.0 |
| 2002 Q3 | 108 | 0 | 0 | 0.0 |
| 2002 Q2 | 75 | 0 | 0 | 0.0 |
| 2002 Q1 | 12 | 0 | 0 | 0.0 |
| 2001 Q4 | 200 | 0 | 0 | 0.0 |
| 2001 Q3 | 1,268 | 2 | 1 | 1577.3 |
| 2001 Q2 | 1,117 | 0 | 0 | 0.0 |
| 2001 Q1 | 58 | 0 | 0 | 0.0 |
| 2000 Q4 | 42 | 0 | 0 | 0.0 |
| 2000 Q3 | 139 | 0 | 0 | 0.0 |
| 2000 Q2 | 89 | 0 | 0 | 0.0 |
| 2000 Q1 | 114 | 0 | 0 | 0.0 |
Reportable incidents
10 on file1990 · 1 incident
1988 · 2 incidents
WAS WORKING IN HOT WEATHER 95-100 DEGREES ALL DAY & SUFFERED FROM HEAT EXHAUTION.
EMPLOYEE WAS HITTING SPROCKET WITH SLEDGE HAMMER WHEN FRAGMENT BROKE OFF AND LODGED IN FOREHEAD WENT TO EMERGENCY ROOM AND DR NEXT DAY TO HAVE GRAGMENT REMOVED REQUIRED 1 STITCHES.
1987 · 1 incident
BELT ON STONE C2NVEYOR BLEW OFF TROUGHING IDLER, 3 MEN WERE LIFTING IT UP TO PUT IT BACK ON WHEN I.NAME STRAINED HIS HIP MUSCLE
1986 · 4 incidents
EMPLOYEE WAS CH9CKING INCOMING POWER AT FUSE BOX WHEN BOX BLEW UP
WHILE UNPLUGGIN1 STONE CHUTE,STONE CAME DOWN CHUTE AND HIT EMPLOYEE IN HEAD.
CRUSHER OPERATO9 WAS WALKING ON PLATFORM AROUND CRUSHER WHEN A SMALL STONE FELL FROM BUCKET LINE AND HIT HIM ON ARM, CAUSING A NERVE TO BECOME PINCHED.
CLIMBED UP ON S7ONE CRUSHER TO ADJUST CLUTCH IN THE PROCESS EMPLOYEE SLIPPED AND FELL TO THE GROUND CAUSING INJURY TO HIS LEFT LEG AND ANKLE.
1985 · 2 incidents
EMPLOYEE UNLOCK9D DOOR & WAS ATTEMPTING TO RAISE DOOR. DOOR WAS RAISED APPROX. 2 FT WHEN 2 TOP PANELS CAME LOOSE FROM TRUCK AND SWUNG DOWN HITTING EMPLOYEE ON HEAD.
EMPL ROLLING ROLL OF BELTING TO CUT PIECE TO BE USED FOR SKIRTING.