Maintenance and Supply: 49 MSHA citations Metal/Non-Metal

Employee was bending parts and he was repositioning the part with a 4 lb hammer. He delivered a glancing blow with the hammer causing him to strike his left ring finger.

Injured was in the process of moving a barrel of chain. He stated he was rolling it to the fork lift and heard a popping sound in his right shoulder. He went to the Dr. He did not receive a diagnosis & was released to return to work. On 5/13/10 injured went for a follow up & was placed on restricted duty & referred to therapy. Injured was taken off work 8-17-10 for surgery.

Injured was using a portable dumpster to empty trash and while dumping the hopper, he got his finger caught in a pinch point.

EE was cleaning check valve with pneumatic needle scaler, when a piece of foreign material entered right eye, past safety glasses with side shield and a face shield. EE had material removed and was given antibiotic ointment for the eye.

EE was helping to lift 120 pound grease barrel into the back of a pickup, when he had lower back pain.(EE went back on restrictions on 5/14/08.)

Employee had beam lying on saw table rollers. He lifted the end to align it with the saw and strained his back. Doctor placed man on temporary restricted duty, not to lift over10 lbs., and was given medications.

Employee cut right ring finger-caught in trailer tongue. Reportable due to stitches/ No restricted lost workdays.

EE CUT LEFT THUMB WITH KNIFE WHILE REMOVING INSULATING MATERIAL FROM ELECTRICAL CABLE. REPORTABLE DUE TO SUTURES.

EMPLOYEE WAS TIGHTENING A GUIDE SHOE. HE STATES HE FELT SOMETHING POP IN HIS SHOULDER. EMPLOYEE BEGAN LOSING TIME 1-16-01.

MASHED FINGER LOCKING OUT TILT CYLINDER REPORTABLE-HAIRLINE FX TO FINGER.

EE WAS USING TORCH TO CUT WELD ON TRUCK BED. METAL OBJECT HIT EE ON LEFT FOOT. BEGAN LOSING TIME 10/25/00.

EMPLOYEE SPRAINED LEFT KNEE WORKING IN AREA UNDER HOIST DRUM. BEGAN LOSING TIME 9-13-00.

EMPLOYEE STRAINE DRIGHT SHOULDER SHILE CUTTING DOWN POWER CABLE. DID NOT GO FOR MEDICAL TREATMENT UNTIL 3-17-00.

USING KNIFE TO CUT BELTING, KNIFE SLIPPED AND CUT HAND. STITCHES REQUIRED. NO LOST WORKDAYS OR RESTRICTED DUTY DAYS.

EE WAS HELPING WITH ROPE CHANGE, STRAINED RIGHT SHOULDER. REPORTABLE MADE MULTIPLE VISITS FOR THERAPY CURRENTLY NO LOST TIME OR RESTRICTED DUTY.

EE SPRAINED KNEE REPAIRING COMPRESSOR-BEGAN RESTRICTED WORK 8-18-99.

EE SPARINED KNEE WHILE CLIMBING-REPORTABLE DUE TO RESTRICTED DAYS-BEGAN RESTRICTED WORK 6-9-99.

CUT LEFT INDEX FINGER-REMOVING HUB ON PLANETARY STITCHES-NO RESTRICTED WORK OR DAYS LOST-RETURNED TO JOB.

EE STRAINED RIGHT KNEE WHILE WORK ING ON PUMP BEGAN LOSING TIME 8/17/98 THE EE HAD A PREVIOUS LOST TIME ACCIDENT ON THE SAME KNEE. MED EVALUATION RECD 8/28/98 THAT THIS IS A NEW INJURY AND SURGERY IS TO BE SCHEDULED

STRIPPING WIRE INSULATION - CUT LEFT HAND - STITCHES REQUIRED.

EMPLOYEE WAS HOOKING UP CHOKER CABLE (NEW) SHARPWIRE CUT HAND STITCHES.

EE WAS SERVICING EQUIPMENT , SLIPPED AND HIT WRIST AGAINST STRUCTURE - REPORTABLE DUE TO STITCHES.

INSTALLING PUMP RUNNER IN A 4GT PUMP ON SKIP POCKET LEVEL. EMPLOYEE AND THREE OTHER MEN WERE MOVING THE RUNNER UP THE STEPS TO THE PUMP STATION. EMPLOYEE HURT HIS LOWER BACK AREA DURING THIS P ROCESS.

EE BEGAN LOSING TIME AGAIN ON 2/4/97.

EE WAS STRUCK IN MOUTH BY SECTION OF PIPE WHILE REPAIRING SKIP--CUT REQUIRED STITCHES.

EMP WAS CLIMBING ON STACK OF MINE SHAFT GUIDES TO REACH A PIPE FITTING. WHEN EMP CLIMBED DOWN FROM THE GUIDES HE SPRAINED RIGHT ANKLE. ACCIDENT BECAME REPORTABLE WHEN EMP BEGAN MISSING TIME FR OM WORK.

EE TWISTED RIGHT KNEE WHILE LIFTING TOOL BOX INTO A PICKUP TRUCK. EE BEGAN MISSING TIME FROM WORK ON 10-1-96 AFTER AN EVALUATION BY A DR.

EMPLOYEE WAS OPERATING A DRILL PRESS. HE WAS ATTEMPTING TO BRUSH AWAY SHAVINGS WITH HIS HAND WHEN HIS GLOVE WAS CAUGHT ON THE BIT. HE SUFFERED A BROKEN THUMB.

EE LIFTED A STEEL BEAM RESULTING IN A HERNIA. THE ACCIDENT BECAME REPORTABLE WHEN HE BEGAN LOSING TIME ON 1/15/96 DUE TO SURGERY TO REPAIR THE HERNIA.

EMPLOYEE WAS USING A PORTA POWER TO PRESS OFF A SPROCKET. THE SPROCKET ROLLED AND HIS FINGER WAS MASHED BY THE PORTA POWER RAM. HE SUFFERED A BORKEN AND LACERATED FINGER WHICH REQUIRED STITC HES.

EE WAS CUTTING A BELT WITH A POCKET KNIFE. THE KNIFE SLIPPED AND HE CUT HIS LEG. STITCHES WERE REQUIRED.

EE TRIPPED ON A PIECE OF BELTING AND FELL. HIS KNEE STRUCK THE CONCRETE FLOOR. THE INJURY BECAME REPORTABLE WHEN HE BEGAN LOSING TIME DUE TO SURGERY ON 4-26-95.

EE MOVED A PIECE OF BAR STOCK ABOUT ONE FOOT ON THE RACK AND STRAINED HIS BACK.

EMPLOYEE WAS REMOVING A VALCE COVER FROM A COMPRESSOR.AIR TRAPPED IN THE CYCLINDER BLEW THE COVER OFF STRIKING HIS ARM.HE SUFFERED A FRACTURE.

SUBJECT WAS STANDING ON OUTRIGGER ON CRAIN, WHEN REACHING FOR A CLEVIS HIS FOOT SLIPPED.

UNLOADING WOODEN SHAFT GUIDE FROM TOP OF MAN CAGE GUIDE FELL AND HIT FOOT INJURY WAS ORIGINALLY THOUGHT TO BE A BRUISE IT CONTINUED TO GIVE HIM TROUBLE AND HE IS HAVING SURGERY FOR LIGAMENT DA MAGE.

EMPLOYEE LOST BALANCE AND FELL- LANDED ON RIGHT THUMB. STITCHES REQUIRED.

LOADING CONV SECTION IN TRUCK CHAIN SLIPPED CHAIN HOOK CAME LOOSE METAL SECTION STRUCK TOP OF L FOOT HAIRLINE FRACT

TWISTED KNEE WHILE SURVEYING PROPERTY

EMPLOYEE WAS USING PICK TO REMOVE CONCRETE FORMS, HIT HAND ON ANCHOR BOLT. INJURY WAS REPORTED AS A MASHED FINGER, LATER THE SMALL FINGER ON RT HAND WAS DISCOVERED TO BE FRACTURED.

EMPLOYEE WAS ADJUSTING A SHAFT PUMP, FINGER WAS CUT ON SHARP EDGE OF MOTOR. NO LOST TIME.

STRIANED MUSCLE IN CHEST WHILE CLOSING VALVE IN SKIP POCKET.

EMPL HURT BACK REMOVING AIR DUCT OFF COMPRESSOR.DIDNT LOSE TIME FROM WORK BUT DID RECEIVE RX MED.

USING TORCH METAL PART UNDER GOGGLESS IN EYE. DID NOT LOSE TIME RQ. PRESCRIP MED.

HOOD FELL AND STRUCK HAND. THIS DID NOT RESULT IN ANY LOST TIME, BUT EMPLOYEE RECEIVED SUTURES ON 9-19-88.

EMPLOYEE STATED THAT HE STRAINED HIS SHOULDER TIGHTENING A LATHE CHUCK. HE DI NOT REPORT THE INJRY TO SUPERVISOR OR SEEK MEDICAL ATTENTION UNTIL 8-15-88.

EMPLOYEE WAS WEARING A PAIR OF GOGGLE TYPE BURING GLASSES WHILE USING A CUTTING TORCH. WHEN HE REMOVED THEM, HIS HAND SLIPPED AND THE GOGGLES STRUCK HIS LEFT EYE.

EMPLOYEE WAS SUPERVISING INSTALLATION OF A CRUSHER LINER ANOTHER EMPLOYEE STRUCK A LINER PLATER WITH A HAMMER AND A CHIP FLEW OFF THE HAMMER HEAD AND S TRUCK I.NAMES FACE THIS DID NOT RESULT I N ANY LOST TIME BUT DID REQUIRE SUTURES

EMPLOYEE LIFTED A PIECE OF CROSSTIE APPROX. FOUR FEET LONG AND HURT HIS BACK. HE DID NOT LOSE ANY TIME FROM WORK BUT DID RECEIVE PRESCRIPTION MEDICATIONS.

EMPLOYEE STRAINED HIS BACK OPENING A SLIDING BAY DOOR.THIS DID NOT RESULT IN ANY LOST TIME BUT HE LATER RECEIVED PRESCRIPTION MEDICATION.

EMPLOYEE CLIMBED UP ON A GALLON FDRUM TO LOOK AT A PUMP. HE SLIPPED AND FELL, HURTING HIS BACK. HE DID NOT LOSE TIME FROM WORK BUT HAS RECENTLY RECEIVED THERAPY FOR THE INJRY.

EMPLOYEE SPRAIN9D HIS WRIST PULLING ON A DOOR TO CLOSE IT.HE DID NOT LOSE ANY TIME FROM WORK BUT DID RECEIVE PRESCRIPTION MEDICATION.

EMP WAS WELDING3ON BIN FEEDER. A ROCK FELL FROM INSIDE THE BIN AND STRUCK HIS RT HAND. EMP DID N OT LOSE ANY TIME AS A RESULT OF THIS ACCIDENT BUT X RAY REPORT WAS NOT MADE UNTIL 8 7 87

EMPLOYEE WAS US3NG AX CUT STRING FOR WEEDEATER AND LACERATED HIS THUMB.

EMPLOYEE SLAMME8 DOOR IN ELECTRICIANS SHOP TO LOCK IT.WHEN HE DID SO A HOT-STICK HUNG ON THE WALL FELL AND STRUCK EMPLOYEES LEFT EAR.THE INJURY DID NOT REAULT IN ANY LOST TIME BUT DID REQUIRE SUTURES. 3

EMPL CUT RING FINGER OF LEFT HAND STACKING PIECES OF METAL IN MACHINE SHOP.REQ SUTURES BUT DIDNT RESULT IN LOST TIME.

INJURED WAS WALKING TOWARD A TRUCK WHEN HE FELL ON THE ICE AND SNOW COVERED ROAD.

EMP WAS OILING WOOD LATHE WHILE RUNNING, AND CAUGHT THUMB BETWEEN CHUCK AND TOOL REST, THIS INJURY DIDNT RESULT IN ANY LOST TIME

EMPLOYEE WAS KNOCKING A PIECE OF BURNED METAL OOSE IT STRUCK HIS HAND LACERATING HIS RT THUMB THE INJURY REQUIRED SUTURES BUT IID NOT RESULT IN ANY LOSS OF TIME