Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← Back to search

Marion Mine & Mill: 214 MSHA citations Metal/Non-Metal

Rogers Group Inc · Underground
Marion, KY, Crittenden County, KY  ·  Abandoned
MSHA Mine ID: 1500003

Marion Mine & Mill has $131K in proposed MSHA penalties and $0 outstanding across 11 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Marion Mine & Mill.

Fatalities
0
Total incidents
37
Years on record
1987–2009
Latest incident
Aug 2009
Compliance record
MSHA citations since 2000
214
citations
77
significant & substantial
$130,867
proposed penalties
$97,741
paid to date
75% of proposed penalties paid to date, a $33,126 gap.
Source: MSHA violations data, updated weekly.
See Rogers Group Inc's full MSHA compliance history →
Inspection activity
MSHA inspections since 2000
73
inspections on record
1,721
inspection hours
12.4
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
214 citations across 1,721 inspection hours.
Source: MSHA inspections data, updated weekly.

Marion Mine & Mill has $131K in proposed MSHA penalties and $0 outstanding across 11 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$131K
proposed penalties
$98K
current assessed
$98K
paid to date
$0
outstanding
213 assessments are final orders; 11 contested dockets.
Of $97K in penalties contested before the Commission, $59K was upheld in final decisions.
As of the most recent assessment on 2010-11-17.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
36.2%
significant & substantial
15.5%
high negligence or reckless
36.2%
reasonably likely or greater
60.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 8.5% low, 76.1% moderate, 15.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘ Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
82 citations taken to the federal commission · 38% of citations on record
  • Settled 77 · 94%
  • Stood as issued 1 · 1%
  • Vacated or withdrawn 4 · 5%
89%
S&S designation survived the contest
ⓘ Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 36 decided S&S contests · industry: 79%
39%
Penalty reduction in decided contests
$95K proposed, $59K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2010-10-15.
Contested penalties
ⓘ A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
KENT 2010-207M Settlement Melick 2012 $30K → $8K
KENT 2008-500M Settlement Lesnick 2010 $18K → $15K
KENT 2010-75M Settlement Melick 2012 $16K → $11K
KENT 2010-1318M Settlement Tureck 2012 $13K → $10K
KENT 2011-55M Dismissal Gill 2011 $7K → $7K
KENT 2010-74M Settlement Lesnick 2010 $6K → $2K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2010-11-18, 15 years ago
26%
of limit-tested samples over the exposure limit
34
samples
31
limit-tested
Most sampled contaminants
  • TC as EC @ 35053 over
  • TCarbon @ 35053 over
  • Total Carbon,calculated from elemental carbon.82 over
  • Diesel particulate (total carbon)52 over
Show the individual readings (57)
Date Contaminant Concentration Limit Conc / limit Occupation
2010-11-18 TC @ 160 175 160 1.09 Backhoe Operator
2009-02-24 TC @ 160 180 160 1.13 Blaster, Powder Gang
2007-05-09 TC as EC @ 350 420.13 350 1.20 Truck Driver
2007-05-09 TCarbon @ 350 565.56 350 1.62 Drill Operator, Rotary
2007-05-09 TC as EC @ 350 632.76 350 1.81 Drill Operator, Rotary
2007-05-09 TCarbon @ 350 1037.51 350 2.96 Front-end Loader Operator
2007-05-09 TC as EC @ 350 1138.7 350 3.25 Front-end Loader Operator
2007-05-09 TCarbon @ 350 365.54 350 1.04 Truck Driver
2005-10-12 Diesel Particulate Material 371 308 1.20 Drill Operator, Rotary Air
2004-05-05 Total Carbon,calculated from elemental carbon. 452.66 400 1.13 Drill Operator, Rotary Air
2004-05-05 Total Carbon,calculated from elemental carbon. 520.55 400 1.30 Truck Driver
2004-05-05 Total Carbon,TC 433 400 1.08 Truck Driver
2010-11-18 TC from EC @ 160 0 160 0.00 Front-end Loader Operator
2010-11-18 TC from EC @ 160 0 160 0.00 Backhoe Operator
2010-11-18 EC @ 160 54 160 0.34 Backhoe Operator
2010-11-18 TC @ 160 27 160 0.17 Front-end Loader Operator
2010-11-18 EC @ 160 9 160 0.06 Front-end Loader Operator
2009-02-24 TC @ 160 113 160 0.71 Blaster, Powder Gang
2009-02-24 TC from EC @ 160 0 160 0.00 Blaster, Powder Gang
2009-02-24 EC @ 160 136 160 0.85 Blaster, Powder Gang
2009-02-24 TC from EC @ 160 0 160 0.00 Blaster, Powder Gang
2009-02-24 TC @ 160 143 160 0.89 Drill Operator, Rotary
2009-02-24 EC @ 160 113 160 0.71 Drill Operator, Rotary
2009-02-24 TC from EC @ 160 0 160 0.00 Drill Operator, Rotary
2009-02-24 Quartz, respirable, >1% Qtz 0.55 2.5 0.22 Truck Driver
2009-02-24 EC @ 160 91 160 0.57 Blaster, Powder Gang
2007-10-24 TCarbon @ 350 131.04 350 0.37 Drill Operator, Jumbo Perc.
2007-10-24 TC as EC @ 350 73.01 350 0.21 Front-end Loader Operator
2007-10-24 TCarbon @ 350 0.84 350 0.00 Front-end Loader Operator
2007-10-24 TC as EC @ 350 56.36 350 0.16 Drill Operator, Jumbo Perc.
2005-11-01 Diesel Particulate Material 274.11 308 0.89 Drill Operator, Rotary Air
2005-10-12 Diesel Particulate Material 151.34 308 0.49 Front-end Loader Operator
2005-10-12 Diesel Particulate Material 107 308 0.35 Truck Driver
2005-10-12 Diesel Particulate Material 114.39 308 0.37 Truck Driver
2005-06-16 Respirable dust, <.1mg 0 Front-end Loader Operator
2005-01-11 Respirable dust, <.1mg 0 Front-end Loader Operator
2004-05-05 Total Carbon,calculated from elemental carbon. 279.1 400 0.70 Scaling (mechanical)
2004-05-05 Total Carbon,TC 387.61 400 0.97 Drill Operator, Rotary Air
2004-05-05 Total Carbon,TC 257.36 400 0.64 Truck Driver
2004-05-05 Total Carbon,calculated from elemental carbon. 301.39 400 0.75 Truck Driver
2004-05-05 Total Carbon,calculated from elemental carbon. 254.13 400 0.64 Front-end Loader Operator
2004-05-05 Total Carbon,TC 217.06 400 0.54 Front-end Loader Operator
2004-05-05 Total Carbon,TC 258.05 400 0.65 Scaling (mechanical)
2003-04-16 Quartz, respirable, >1% Qtz 1.64 2.86 0.57 Screen/Scalper Operator
2003-04-16 Nuisance dust, respirable, <1% Qtz 0.28 10 0.03 Blaster, Powder Gang
2003-04-16 Quartz, respirable, >1% Qtz 0.36 2.14 0.17 Crusher Oper/Worker
2003-01-28 Total Carbon,TC 88.38 400 0.22 Truck Driver
2003-01-28 Total Carbon,TC 228.88 400 0.57 Drill Operator, Rotary
2003-01-28 Total Carbon,calculated from elemental carbon. 190.72 400 0.48 Drill Operator, Rotary
2003-01-28 Total Carbon,TC 349.39 400 0.87 Scaling (mechanical)
2003-01-28 Total Carbon,calculated from elemental carbon. 328.03 400 0.82 Scaling (mechanical)
2003-01-28 Total Carbon,calculated from elemental carbon. 75.19 400 0.19 Truck Driver
2001-04-17 Nuisance dust, respirable, <1% Qtz 0.31 10 0.03 Truck Driver
2001-04-17 Quartz, respirable, >1% Qtz 1.19 2.46 0.48 Truck Driver
2001-04-17 Quartz, respirable, >1% Qtz 0.32 2.34 0.14 Front-end Loader Operator
2001-04-17 Quartz, respirable, >1% Qtz 0.29 2.46 0.12 Crusher Oper/Worker
2001-04-17 Respirable dust, <.1mg 0 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Marion Mine & Mill recorded 0.00 reportable injury cases per 100 full-time workers in 2010.

Injury rate, 2010
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 2.68 and the all-US-mining average was 3.20 cases per 100 workers.
In Kentucky, metal and nonmetal mining averaged 2.10 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2010 * 0.00 0.00 0.000
2009 * 12.18 0.00 0.000
2008 * 0.00 0.00 0.000
2007 * 0.00 0.00 0.000
2006 * 0.00 0.00 0.000
2005 * 0.00 0.00 0.000
2004 * 9.26 0.00 0.000
2003 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Kentucky Stone Company 1950 to 1988
  2. Hanson Aggregates Midwest Inc 1988 to 2000
  3. Rogers Group Inc 2000 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2011 2
2010 16
2009 21
2008 16
2007 18
2006 18
2005 16
2004 16
2003 15
2002 13
2001 19
2000 21
Source: MSHA quarterly employment and production, updated weekly.

Marion Mine & Mill sits in Crittenden County, Kentucky, where the Census mining category is 6.2% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Crittenden County, Kentucky · Population 8,972
6.2%
Mining share of county employment
$47,003
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2011 Q1 503 0 0 0.0
2010 Q4 5,151 3 1 582.4
2010 Q3 3,844 4 2 1040.6
2010 Q2 5,592 11 5 1967.1
2010 Q1 8,088 6 2 741.8
2009 Q4 6,699 8 0 1194.2
2009 Q3 11,129 39 17 3504.4
2009 Q2 5,733 20 4 3488.6
Show 37 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2009 Q1 9,277 14 4 1509.1
2008 Q4 3,132 10 4 3192.8
2008 Q3 8,805 0 0 0.0
2008 Q2 7,751 3 1 387.0
2008 Q1 1,522 0 0 0.0
2007 Q4 7,368 11 4 1492.9
2007 Q3 8,468 1 0 118.1
2007 Q2 8,680 8 5 921.7
2007 Q1 6,864 5 2 728.4
2006 Q4 4,823 5 0 1036.7
2006 Q3 10,160 6 3 590.6
2006 Q2 9,560 6 3 627.6
2006 Q1 3,257 13 4 3991.4
2005 Q4 12,845 6 3 467.1
2005 Q3 5,742 3 1 522.5
2005 Q2 5,665 3 0 529.6
2005 Q1 1,838 1 0 544.1
2004 Q4 5,718 0 0 0.0
2004 Q3 3,542 0 0 0.0
2004 Q2 9,635 4 1 415.2
2004 Q1 2,712 3 1 1106.2
2003 Q4 7,017 1 0 142.5
2003 Q3 2,718 0 0 0.0
2003 Q2 8,882 4 3 450.3
2003 Q1 7,606 1 0 131.5
2002 Q4 4,592 0 0 0.0
2002 Q3 9,714 0 0 0.0
2002 Q2 3,049 0 0 0.0
2002 Q1 1,849 0 0 0.0
2001 Q4 6,417 0 0 0.0
2001 Q3 9,567 0 0 0.0
2001 Q2 8,797 5 2 568.4
2001 Q1 4,159 5 3 1202.2
2000 Q4 8,243 1 0 121.3
2000 Q3 13,030 0 0 0.0
2000 Q2 12,745 2 1 156.9
2000 Q1 7,109 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

37 on file

2009 · 2 incidents

August 11, 2009 KY · Metal/Non-Metal laborer, bull gang, parts runner, roustabout, roof trimmer/scaler SLIP OR FALL OF PERSON
Rogers Group Inc · Over-exertion (Not Elsewhere Classified)

Employee stepped onto a working platform that had different grating and rolled his ankle.

August 1, 2009 KY · Metal/Non-Metal laborer, bull gang, parts runner, roustabout, roof trimmer/scaler SLIP OR FALL OF PERSON
Rogers Group Inc · Fall to lower level, (Not Elsewhere Classified)

EE had finished scaling the face and was standing on a piece of loose rock to see if he missed any. His ankle rolled off the rock and he heard a pop.

2004 · 1 incident

June 17, 2004 KY · Metal/Non-Metal driller operator HANDTOOLS (NONPOWERED)
Rogers Group Inc · Struck by... (Not Elsewhere Classified)

employee was changing a drill bit . he hit the old bit with a hammer when a fragment hit him below the knee

2000 · 1 incident

May 23, 2000 KY · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Hanson Aggregates Midwest Inc · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE WAS SHUTTING DOORS TO SCREEN AND MASHEDHIS LEFT RING FINGER AND LEFT MIDDLE FINGER.

1997 · 3 incidents

December 16, 1997 KY · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Hanson Aggregates Midwest Inc · Over-exertion in pulling or pushing objects

EMPLOYEE WAS REPLACING HOSE ON HIS LOADER HE WAS PULLING ON IT TO GET IT IN PLACE WHEN HE STRAINED HIS STOMACH MUSCLES.

October 30, 1997 KY · Metal/Non-Metal welder (shop) POWERED HAULAGE
Hanson Aggregates Midwest Inc · Over-exertion (Not Elsewhere Classified)

EMPLOYEE WAS STOCKPILING RIP RAP. PULLED ON DUMP LEVER TO DUMP THE MATERIAL. LEVER WAS HARD TO PULL UP. STRAINED AND PULLED LIGAMENTS IN LEFT ARM AND ELBOW.

1994 · 4 incidents

September 20, 1994 KY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech POWERED HAULAGE
Hanson Aggregates Midwest Inc · Struck by falling object

LARGE ROCK FELL OFF CONVEYOR BELT AND STRUCK INJURED EE ON LEFT LOWER BACK.

August 30, 1994 KY · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Hanson Aggregates Midwest Inc · Struck by flying object

A LARGE ROCK WAS ACCIDENTALLY THROWN BY ANOTHER EMPLOYEE & STRUCK INJURED EMPLOYEE IN THE LEFT FOOT

July 11, 1994 KY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Hanson Aggregates Midwest Inc · Fall down stairs

EMPLOYEE WAS WALKING UP THE STAIRS, HIS FOOT SLIPPED AND HE FELL ABOUT 12 FEET DOWN THE STAIRS.

1993 · 4 incidents

July 28, 1993 KY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Hanson Aggregates Midwest Inc · Struck against stationary object

EMPLOYEE WAS HAMMERING A BIG ROCK INSIDE THE PRIMARY CRUSHER. HE PULLED HIS ARM BACK & HIT THE STEEL FRAME WITH HIS RIGHT ELBOW.

July 20, 1993 KY · Metal/Non-Metal driller operator HANDTOOLS (NONPOWERED)
Hanson Aggregates Midwest Inc · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS SCALING THE MINE WALL WITH A SCALING BAR, THE BAR SLIPPED AND STRUCK EMPLOYEE ON THE RIGHT SIDE FO THE HEAD.

1992 · 1 incident

July 13, 1992 KY · Metal/Non-Metal laborer, bull gang, parts runner, roustabout, roof trimmer/scaler MACHINERY
Hanson Aggregates Midwest Inc · Struck by flying object

54736YEE WAS DRILLING IN ROOF BOLTS WITH A AIR IMPACT WSRENCH AIR FROM IMPACE WRENCH BLEW STEEL AROUND GLASSES INTO EYE

1991 · 7 incidents

December 4, 1991 KY · Metal/Non-Metal welder (shop) MACHINERY
Hanson Aggregates Midwest Inc · Contact with hot objects or substances

EMPLOYEE WAS CUTTING METAL WITH TORCH WHEN A PIECE OF HOT METAL FELL BACK ON HIS RIGHT LEG.

September 16, 1991 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
Hanson Aggregates Midwest Inc · Over-exertion (Not Elsewhere Classified)

BACK AXLE FRAMES BROKE ON TRUCK

July 29, 1991 KY · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Hanson Aggregates Midwest Inc · Struck against stationary object

EMPLOEYE WAS CLIMBING UP LADDER WHEN HIS FOOT SLIPPED CAUSING HIS SHIN TO STRIKE THE METAL STEPS.

July 15, 1991 KY · Metal/Non-Metal bull gang foreman, labor foreman, leadman, section foreman, shift boss HANDTOOLS (NONPOWERED)
Hanson Aggregates Midwest Inc · Over-exertion (Not Elsewhere Classified)

WHILE PRYING ON A SCREEN, EMPLOYEE STRAINED RIGHT ARM AND SHOULDER.

July 8, 1991 KY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Hanson Aggregates Midwest Inc · Struck by falling object

WHILE OPENING SHOP DOOR A SUPPORT BEAM FELL AND HIT EE ON THE HEAD.

July 1, 1991 KY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Hanson Aggregates Midwest Inc · Struck by... (Not Elsewhere Classified)

WHILE MOVING A GUARD THE GUARD SLIPPED & HIT EMPLOYEE IN THE SHOULDER

1990 · 7 incidents

June 25, 1990 KY · Metal/Non-Metal laborer, bull gang, parts runner, roustabout, roof trimmer/scaler EXPLODING VESSELS UNDER PRESSURE
Hanson Aggregates Midwest Inc · Struck by... (Not Elsewhere Classified)

EE WAS UNHOOKING POWDER RIG FROM AIRLINE. HE CLOSED THE MAIN VALVE BUT DID NOT BLEED THE AIR LINE BEFORE DISCONNECTING THE POWDER RIG VALVE. THE PRESSURE IN THE LINES WHEN UNHOOKED BLOWED THE VALVE END AGAINST HIS HAND.

June 8, 1990 KY · Metal/Non-Metal mine manager, mine foreman, mine owner HANDTOOLS (NONPOWERED)
Hanson Aggregates Midwest Inc · Struck by... (Not Elsewhere Classified)

EMPL WAS HLEPING PLANT MAN CLEAN OUT CHUTE ON SECONDARY CRUSHER. HE WAS CLEANING OUT ROCK WITH LEFT HAND & RIGHT HAND WAS RESTING AGAINST CHUTE. PLANT MAN USED SLEDGE HAMMER TO LOOSEN ROCK IN CHUTE NOT REALIZING EMPLS HAND WAS UP AGAINST CHUTE HE HIT IT WITH SLEDGE HAMMER.

May 9, 1990 KY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver OTHER
Hanson Aggregates Midwest Inc · Absorption of radiations, caustics, toxic and noxious substances

EMPLOYEE WAS CHECKING THE ENGINE OIL. WHILE CHECKING THE OIL SHE FELT SOMETHING STING HER ON THE NECK, ALTHOUGH SHE DID NOT SEE ANYTHING.

April 9, 1990 KY · Metal/Non-Metal bull gang foreman, labor foreman, leadman, section foreman, shift boss HANDTOOLS (NONPOWERED)
Hanson Aggregates Midwest Inc · Struck by... (Not Elsewhere Classified)

REPAIR WORK WAS BEING DONE ON DRILL. SLEDGE HAMMER WAS USED TO DRIVE PIN INTO PLACE WHILE HAMMER PIECE OF METAL BROKE OFF PIN & STRUCK EMPL IN LEG.

April 4, 1990 KY · Metal/Non-Metal laborer, bull gang, parts runner, roustabout, roof trimmer/scaler HANDLING OF MATERIALS
Hanson Aggregates Midwest Inc · Struck against stationary object

EMPLOYEE WAS UNLOADING ANFO FRO POWER TRUCK TO POWDER RIG. HE BACKED OFF OF THE POWDER TRUCK AND HIT HIS TAIL BONE ON THE PLATFORM OF THE POWDER RIG.

1989 · 3 incidents

July 12, 1989 KY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Hanson Aggregates Midwest Inc · Fall from machine

EMPLOYEE WAS REPLACING GUARDS ON LOADER OWHEN HE SLIPPED HE GRABBED GUARD RAIL & JERKED CAUSING ARM INJURY

1988 · 1 incident

November 23, 1988 KY · Metal/Non-Metal truck driver SLIP OR FALL OF PERSON
Hanson Aggregates Midwest Inc · Fall onto or against objects

WHILE DISMOUNTING FROM HAUL UNIT HE SLIPPED ON LADDER AND LEG WENT THROUGH LADDER WHILE GRABBING HAND HOLD THE EMPLOYEE LEG COLLIDED WITH THE LADDER.

1987 · 3 incidents

December 15, 1987 KY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Kentucky Stone Company · Over-exertion in lifting objects

EMPL CLEANING S2OP BLDG.,LIFTED HALF-EMPTY BARREL OF OIL & RUPTURED GROIN.

December 14, 1987 KY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator OTHER
Kentucky Stone Company · Unclassified, insufficient data

EMPLOYEE WAS WA5KING TO SHOP WHEN HE FELL TO THE GROUND WITH AN APPARENT HEART ATTACK.

November 3, 1987 KY · Metal/Non-Metal truck driver POWERED HAULAGE
Kentucky Stone Company · Fall from machine

AFTER LOADING B5GS OF ANFO IN BACK OF TRUCK INJURED RODE ON TOP OF BAGS A SHORT DISTANCE TO THE CAPS HOUSE WHEN BAGS SLID CAUSING INJURED TO FALL FROM BACK OF VEHICLE INJUREDS HEAD HIT THE MI NE FLOOR CAUSIN1 A LACERATION TO THE FRONT LEFT SIDE OF HEAD