Employee fell while dismounting a D6T dozer injuring right shoulder.
Marshall Mine: 11 MSHA citations Coal
Caddo Creek Resources Company L.L.C.
· Surface
Controlled by
NACCO Industries Inc
Gill,
Harrison County,
TX
·
Abandoned
MSHA Mine ID: 4104864
Marshall Mine has $91K in proposed MSHA penalties and $0 outstanding across 2 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Marshall Mine.
- Fatalities
- 0
- Total incidents
- 2
- Years on record
- 2014–2019
- Latest incident
- May 2019
Compliance record
MSHA citations since 2013
11
citations
5
significant & substantial
$91,338
proposed penalties
$86,802
paid to date
95% of proposed penalties paid to date, a $4,536 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2012
41
inspections on record
1,745
inspection hours
0.6
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.11 citations across 1,745 inspection hours.
Source: MSHA inspections data, updated weekly.
Marshall Mine has $91K in proposed MSHA penalties and $0 outstanding across 2 contested dockets.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$91K
proposed penalties
$87K
current assessed
$87K
paid to date
$0
outstanding
11 assessments are final orders; 2 contested dockets.
Of $90K in penalties contested before the Commission, $85K was upheld in final decisions.
As of the most recent assessment on 2021-12-08.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.45.5%
significant & substantial
9.1%
high negligence or reckless
45.5%
reasonably likely or greater
27.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 18.2% low, 72.7% moderate, 0.0% high, 9.1% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
3
citations taken to the federal commission · 27% of citations on record
- Settled 3 · 100%
100%
S&S designation survived the contest
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.of 3 decided S&S contests · industry: 79%
5%
Penalty reduction in decided contests
$90K proposed, $85K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2014-02-25.
Contested penalties
ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| CENT 2014-0244 | Settlement | Simonton | 2014 | $63K → $63K |
| CENT 2014-0245 | Settlement | Simonton | 2014 | $27K → $22K |
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
MSHA sampling at Marshall Mine shows 100% of 103 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2022-01-04, 4 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.100%
within 1.5 mg/m3
103
samples
0.21
dust max (mg/m3)
0
over MSHA ECV
ⓘ
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.73 samples taken by MSHA inspectors, 30 by the operator.
Most-sampled occupations
- BULLDOZER OPERATOR58
- COAL TRUCK DRIVER11
- BACKHOE OPERATOR8
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2021-12-09, 4 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.0%
over PEL
70
samples
Most-sampled occupations
- BULLDOZER OPERATOR22
- COAL TRUCK DRIVER14
- BACKHOE OPERATOR11
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust by year
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2022 | 100% | 1 |
| 2021 | 100% | 17 |
| 2020 | 100% | 12 |
| 2019 | 100% | 9 |
| 2018 | 100% | 17 |
| 2017 | 100% | 19 |
| 2016 | 100% | 12 |
| 2015 | 100% | 11 |
| 2014 | 100% | 1 |
| 2012 | 100% | 4 |
Noise by year
| Year | over PEL | samples |
|---|---|---|
| 2021 | 0% | 14 |
| 2020 | 0% | 10 |
| 2019 | 0% | 5 |
| 2018 | 0% | 15 |
| 2017 | 0% | 15 |
| 2016 | 0% | 5 |
| 2015 | 0% | 5 |
| 2014 | 0% | 1 |
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Marshall Mine recorded 0.00 reportable injury cases per 100 full-time workers in 2021.
Injury rate, 2021
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.35 and the all-US-mining average was 2.19 cases per 100 workers.
In Texas, coal mining averaged 0.48 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2021 * | 0.00 | 0.00 | 0.000 |
| 2020 * | 0.00 | 0.00 | 0.000 |
| 2019 * | 3.86 | 3.86 | 0.000 |
| 2018 * | 0.00 | 0.00 | 0.000 |
| 2017 * | 0.00 | 0.00 | 0.000 |
| 2016 * | 0.00 | 0.00 | 0.000 |
| 2015 * | 0.00 | 0.00 | 0.000 |
| 2014 * | 0.00 | 0.00 | 0.000 |
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
- Caddo Creek Resources Company L.L.C. 2011 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2022 | 14 | |
| 2021 | 27 | |
| 2020 | 25 | 83,235 |
| 2019 | 26 | 185,718 |
| 2018 | 29 | 185,097 |
| 2017 | 33 | 240,240 |
| 2016 | 29 | 213,647 |
| 2015 | 37 | 210,573 |
| 2014 | 16 | 3,338 |
| 2013 | 8 | |
| 2012 | 8 |
Source: MSHA quarterly employment and production, updated weekly.
Marshall Mine sits in Harrison County, Texas, where the Census mining category is 3.1% of county employment.
Local economic context
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.Harrison County, Texas · Population 69,584
3.1%
Mining share of county employment
$66,040
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.Citations per million employee-hours, as reported to MSHA
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2022 Q1 | 4,191 | 0 | 0 | 0.0 |
| 2021 Q4 | 11,409 | 1 | 0 | 87.7 |
| 2021 Q3 | 13,178 | 0 | 0 | 0.0 |
| 2021 Q2 | 10,632 | 0 | 0 | 0.0 |
| 2021 Q1 | 9,113 | 0 | 0 | 0.0 |
| 2020 Q4 | 9,338 | 0 | 0 | 0.0 |
| 2020 Q3 | 11,131 | 0 | 0 | 0.0 |
| 2020 Q2 | 12,101 | 0 | 0 | 0.0 |
Show 32 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2020 Q1 | 13,085 | 0 | 0 | 0.0 |
| 2019 Q4 | 12,087 | 0 | 0 | 0.0 |
| 2019 Q3 | 13,132 | 0 | 0 | 0.0 |
| 2019 Q2 | 13,002 | 0 | 0 | 0.0 |
| 2019 Q1 | 13,648 | 0 | 0 | 0.0 |
| 2018 Q4 | 13,241 | 0 | 0 | 0.0 |
| 2018 Q3 | 14,132 | 0 | 0 | 0.0 |
| 2018 Q2 | 14,547 | 0 | 0 | 0.0 |
| 2018 Q1 | 14,066 | 0 | 0 | 0.0 |
| 2017 Q4 | 13,231 | 0 | 0 | 0.0 |
| 2017 Q3 | 16,619 | 0 | 0 | 0.0 |
| 2017 Q2 | 16,468 | 0 | 0 | 0.0 |
| 2017 Q1 | 15,596 | 0 | 0 | 0.0 |
| 2016 Q4 | 14,260 | 0 | 0 | 0.0 |
| 2016 Q3 | 12,976 | 0 | 0 | 0.0 |
| 2016 Q2 | 12,837 | 0 | 0 | 0.0 |
| 2016 Q1 | 14,421 | 0 | 0 | 0.0 |
| 2015 Q4 | 15,015 | 0 | 0 | 0.0 |
| 2015 Q3 | 18,448 | 0 | 0 | 0.0 |
| 2015 Q2 | 17,986 | 0 | 0 | 0.0 |
| 2015 Q1 | 20,087 | 0 | 0 | 0.0 |
| 2014 Q4 | 14,919 | 0 | 0 | 0.0 |
| 2014 Q3 | 7,164 | 0 | 0 | 0.0 |
| 2014 Q2 | 5,466 | 0 | 0 | 0.0 |
| 2014 Q1 | 5,312 | 0 | 0 | 0.0 |
| 2013 Q4 | 3,326 | 0 | 0 | 0.0 |
| 2013 Q3 | 1,957 | 0 | 0 | 0.0 |
| 2013 Q2 | 2,672 | 0 | 0 | 0.0 |
| 2013 Q1 | 4,535 | 0 | 0 | 0.0 |
| 2012 Q4 | 4,075 | 0 | 0 | 0.0 |
| 2012 Q3 | 4,108 | 0 | 0 | 0.0 |
| 2012 Q2 | 2,886 | 0 | 0 | 0.0 |
No fatalities recorded at this mine.
Reportable incidents
2 on file2019 · 1 incident
May 17, 2019
TX · Coal
bulldozer operator, universal operator, heavy equipment operator, operating engineer
SLIP OR FALL OF PERSON
Caddo Creek Resources Company L.L.C. · Fall from machine
2014 · 1 incident
Caddo Creek Resources Company L.L.C. · Fall onto or against objects
Worker was sitting in chair, stood up to walk around tool trailer to get a better view of boom raising. Was looking and talking to coworkers while walking and tripped over pallet of light brackets. Fell forward and cut hand on unistrut welded to light bracket and bruised right leg. Worker was not watching where he was walking! Worker received 5 stitches in left hand.