Martin Marietta - Lawyers Rd. Quarry Metal/Non-Metal

Senior Employee who wears a pacemaker experienced shortness of breath and felt heartbeat was abnormal

Employee was cutting an information from a hydraulic hose with carpet knife, knife slipped and cut thumb on left hand.

Miner was walking down the rock ramp that had been dug out at the surge pile to reach the feeder. The miner was part of a crew working on the surge pile feeder. It had been raining all morning and the rock was wet. The employee slipped and cut a finger on the rock as they caught themselves.

Driller had placed a cardboard blast hole tube into a completed hole, while cutting to proper height of tube above the ground. EE was pulling EE's cut off tool toward self, tool slipped sticking in EE's right lower leg.

Injured EE was connecting lifting strap from Bearing to Crane Hook. Bearing was propped to provide access to opening for strap connection. Bearing shifted from raised position and EE was suddenly supporting most of the weight.

Helping load a shot, sitting in the truck operating the controls, started to feel nauseous. (Diagnosed with vertigo)

EE was driving a Terex 3066 C Articulated Rear Dump Truck down a steep gravel haul road into a turn. The equipment's rear tandem tires began to "buck jump". EE applied brakes. Truck slid sideways and turned over on right side. EE caught arm in steering wheel and broke right humerus.

Employee was using a pole to clean out the pug-mill hopper. When the employee thrust the pole into the material, he hit the outside edge of his right hand on the corner of a drive belt guard. This caused a cut in the hand and 7 stitches were required.

Employee was chipping a recent weld when some hot slag was chipped onto his left elbow. The employee waited two weeks to seek medical attention when the elbow became red and swollen. He did not indicate injury was definitely he related until 10/09/06 ( the return to work date).

The employee was dipping the sediment pond using the track hoe. Some of the mud fell out of the bucket, hit the handrail on the track hoe, ricocheted through the open window and hit the employee in the corner of his left eye. The employee was wearing safety glasses.

JOB DETAIL: REMOVE PLATFORM SURROUNDING A STONE CRUSHER. JOB PLAN: CUT THE 16'X28' PLATFORM IN HALF, RIG , AND REMOVE EACH SECTION. ACCIDENT: UNKNOWN TO THE EE, THE PLATE WAS NOT ATTACHED TO T HE SUPPORT STEEL. HE WAS IN THE CENTER OF PLATFORM WHEN HE CUT THE PLATE TO 27"X96", THE PLATE FELL 11'3" TO THE GROUND WITH THE EE LANDING ON TOP.

THE EE WAS WALKING FROM HIS TRUCK TO THE BREAK ROOM WHEN HE SLIPPED ON SOME ICE.

EE WAS COMING OUT OF DOORS USED AS A LOADING DOCK-HE STEPPED ON A PALLET, 2 OF THE BOARDS BROKE, TWISTING HIS ANKLE.

EE WAS PUSHING ON A GATE HANLE ON A VIBRATING SCREEN WHEN HE FELT A PAIN IN HIS LOWER TO MID BACK.

EE WAS HAMMERING IN A WEDGE WITH AN 8 LB. HAMMER WHEN HE ACCIDENTALLY HIT THE MIDDLE FINGER ON HIS LEFT HAND. EE WAS WEARING GLOVES.

EMPLOYEE WAS CARRYING SCREEN CLOTH UP STEPS WHENHE FELT PAIN IN HIS LOWER LEFTHAND SIDE OF BACK.EMPLOYEE WENT TO DOCTOR ON 5/25/2000.

EE WAS TRYING TO OPEN A GATE VALVE NEAR PUMPS AT WASH PLANT. WHEN HE PULLED ON VALVE, IT MUST HAVE STILL BEEN FROZEN A LITTLE CAUSE IT WAS STUCK AND THE EE FELT SOMETHING PULL IN HIS SHOULDER. HE WENT TO THE DR AND WAS DIAGNOSED WITH A SPRAINED SHOULDER. HE WAS SENT TO A PHYSICAL THERAPIST SIX TIMES FOR ELECTRICAL SHOCK TREATMENT AND EXERCISING. EE COULD STILL PERFORM ALL JOB DUTIE

EE WAS ON PLATFORM LOOSENING BOLT ON GUARD. ANOTHER EE WAS ON OTHER SIDE OF GUARD ASSISTING. HE KICKED GUARD. GUARD FELL ON OTHER EE INJURING HIS RIGHT HAND.

EE WAS LIFTING 1-10 LB ROCKS OFF CONVEYOR FRAME AND WHEN PLACING ROCK ON BELT NOTICED SEVERE PAIN TO LOWER BACK.

EMPLOYEE WAS STANDING ON CATWALK OUTSIDE CAT 769 STOCK TRUCK SHOWING ANOTHER EMPLOYEE IN ANOTHER TRUCK HIS LEFT FRONT TIRE WHICH HE THOUGHT WAS LOW ON AIR EMPLOYEE FELL OF TRUCK 8FT TO AROUND INJURIES ARE FRACTURED WRIST BROKEN RIBS

EMPLOYEE WAS HAULING WASTE MATERIAL TO SPOIL PILE HE HIT A BUMP IN THE ROAD WAS BOUNCED UP & JAMMED HIS NECK

EMPLOYEE WAS HOLDING CHISEL WHILE ANOTHER EMPLOYEE WAS USING HAMMER TO REMOVE ZINC FROM INNER ECCENTRIC BUSHING. ZINC BROK LOSE 7 EMPLOYEE WAS STRUCK ON HAND BY HAMMER. LEFT INDEX FINGER WAS S LIGHTLY FRACTURED.

EE WAS RAISING WINDOW IN HAUL TRUCK LATCH WAS NOT SECURE LATCH FELL STRIKING EE IN LEFT HAND 5TH FINGER.

EMPLOYEE WAS HELPING TO UNLOAD SHIPMENT OF PUGMILL PADDLES WHEN HE BENT OVER TO LIFT PADDLES HE STRAINED HIS BACK.

OPERATOR DRIVING HAUL TRUCK UP RAMP.TRUCK STALLED-OPERATOR APPLIED BRAKE-TRUCK STARTED ROLLING BACKWARD.OPERATOR ATTEMPTED TO STEER TRUCK.TRUCK TURNED ON ITS SIDE.WINDSHIELD BROKE-CAT WALK DAM AGED-OPERATOR SUFFERED BRUISED RIBS AND SPRAINED ANKLE.

DRIVERS SEAT IN LOADER BOTTOMED OUT CAUSING A JOLT TO OPERATORS BACK LOWER BACK STRAIN.

CLEANING UNDER ROLLER WITH SLEDGE HAMMER SM FINGER R HAND CAUGHT BY HAM MER AGAISNT FRAME

EMPLOYEE WAS GREASING CONVEYOR WAS STARTLED BY LOUD NOISE SLIPPED & FELL INTO CONVEYOR LACERATIONS TO THE INDEX MIDDLE & RING FINGER ON LEFT HAND

CUTTING BELT AND THE KNIFE SLIPPED CUTTING TWO FINGERS CUASING THE NEED FOR STITCHES IN HIS THUMP. LACERATION WAS 2 CM LONG. THIS INDIVIDUAL IS EMPLOYED BY VA CCOROLINA. BELT OC. WHO WAS CO NTRACTED TO REPAIR A BELT.

BENDING OVER TO PICK UP PIPE WRENCH. WHEN EMPL STRAIGHTENED UP FELT TREMENDOUS PAIN IN LOWER BACK.

TRUCK DRIVER FOR THOMPSON TRUCKING STOPPED VEHICLE UNDER BIN TO LOAD TRUCK.GOT OUT OF VEHICLE AND CLIMBED ONTO CONCRETE PLATFORM TO PUSH LOAD BUTTON.JUMPED OFF PLATFORM,LOST FOOTING RECD ABRAS IONS TO BOTH PALMS,SLIGHT ABRASION TO LOWER BACK.COMPLAINED OF BACK PAIN ,WENT TO HOSP FOR X-RAY,SEEN BY DR-LUMBAR STRAIN ACUTE.

EMPLOYEE DISLODGING HUNG SLAB BELT PUSHED SLAB AGAINST EMPLOYEES ARM PINNING ARM BETWEEN SLAB AND CHUTE LACERATION TO RIGHT ARM.

EMPLOYEE S FOOT SLIPPED WHILE HE WAS LETTING TORCH DOWN TO CRUSHER AND HURT BACK ON LOWER RIGHT SIDE. HE HAD JUST FINISHED UCTTING AN ACCESS HOLE IN A SPEED REDUCER AND WAS LETTING THE TORCH D OWN TO THE WELDER ON THE GROUND BELOW.

EMPL WAS ATTEMPTING TO REPLACE A PIECE OF SCREN CLOTH ALLEGEDLY WAS PULLING IT INTO PLACE AND PULLED A MUSCLE IN R ELBOW

EMPLOYEE WASHED OUT OF BED OF TRUCK, AND FORGOT TO LOWER BED. PROCEEDED TO FUEL TRUK, AND BED CAUGHT IN CONVEYOR CAUSING EMPLOYEE TO HIT STEERING WHEEL.

WHILE REPAIRING THE AIR SEPERATOR LINING UP THE SHAFT OF THE FAN ASSEMBLY SUPPORT ANGLE IRON ARMS WHERE THE BLADES ARE ATTACHED COLLASPED ALLOWING FAN ASSEMBLY TO FALL ON EMPLOYEE PINNING HIM BETWEEN FAN ASSEMBLY AND LADDER IMPAIRMENT RESULTING IN LEFT FIBULA TALLUS AND RT FOOT FRACTURES

EMPLOYEE WAS CLEANING OUT CHUTE AT TRANSFER BOX ON 2 CONVEYOR WAS USING BAR TO WEDGE OUT ROCK WHEN ROCK GAVE AND ANOTHER ROCK FELL DOWN MASHING FINGER BETWEEN BAR AND ROCK.

TRANSFER BOX HAD STOPPED UP. EMPLOYEE USED HAMMER TO BEAT SIDE OF TRANSFER BOX TO DISLODGE MATERIAL TO FREE THE STOP UP. EMPLOYEE HIT FINGER ON FLANGE THAT HOLDS TRANSFER BOX.

I NAME WAS MOVING AND STACKING CRIBBING BLOCKS STATED THAT H E DID NOT NOTICE ANYTHING WRONG AT THE TIME HE SADI THAT THE PAIN STARTED LATER THAT NIGHT AT HOME.

SLIPPED ON FROZEN ICE ON GROUND AND INJURED KNEE.

EMPLOYEE WAS GR9ASING VEHICLE.THE END OF GREASE GUN HOSE BURST CAUSING INJURY TO FINGER.

EMPLOYEE STEPPI3G DOWN OFF CAT WALK AND STEPPED ON OIL AND FELL AND HURT HAND SHOULDER AND BACK.

PULLING DOOR OU7 OF CHUTE AND CAUGHT FINGER AND CRUSHED MIDDLE AND RING FINGERS.

HE AND I.NAME G9TTING SLAB OFF #1 BELT. EMPLOYEES PICKING UP SLAB TOGETHER AND SLAB SLIPPED OUT OF HANDS OF I.NAME AND HURT HIS BACK.

EE OPERATING LO5DER & BACK STARTED HURTING FROM BOUNCING UP & DOWN.

FRACTURE TO LIT7LE FINGER ON LEFT HAND CAUGHT BETWEEN HOSE AND BARREL AT SHOP

HURT BACK LIFTI3G LAWN MOWER TO CHECK BLADE.

EMPLOYEE STARTE8 DOWN STEPS OF LOADER WITH DRINK IN HAND AND MISSED LAST STEP OF LOADER AND FELL HURTING BACK.

PUTTING ROLLER TOGETHER ON SHOVEL & TWISTED KNEE.

FINGER CAUGHT BETWEEN LOADER BUCKET AND TRASH CONTAINER.MASHED FINGER CAUSING TENDONS TO BE CUT.PUT SPLINT AND CAST ON FINGER.