citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 314 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Meredyth Mine has $5K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$5K
proposed penalties
$5K
current assessed
$5K
paid to date
$0
outstanding
27 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2011-10-04.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
MSHA sampling at Meredyth Mine shows 100% of 67 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2011-12-13, 14 years ago
100%
within 1.5 mg/m3
67
samples
1.35
dust max (mg/m3)
60 samples taken by MSHA inspectors, 7 by the operator.
Noise
ⓘThe share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Health sampling trend
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Meredyth Mine recorded 10.17 reportable injury cases per 100 full-time workers in 2011.
Injury rate, 2011
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
10.17
total case rate
0.00
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 3.83 and the all-US-mining average was 3.08 cases per 100 workers.
In Alabama, coal mining averaged 4.75 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2011 *
10.17
0.00
0.000
2010 *
0.00
0.00
0.000
2008 *
5.60
5.60
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘCoal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year
Employees
Coal produced (tons)
2012
7
8,179
2011
24
116,900
2010
15
70,229
2009
16
62,874
2008
16
113,875
Source: MSHA quarterly employment and production, updated weekly.
Meredyth Mine sits in Franklin County, Alabama, where the Census mining category is 0.4% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Franklin County, Alabama · Population 31,978
0.4%
Mining share of county employment
$51,493
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2012 Q1
8,250
0
0
0.0
2011 Q4
16,290
3
1
184.2
2011 Q3
19,306
0
0
0.0
2011 Q2
14,871
2
0
134.5
2011 Q1
8,518
0
0
0.0
2010 Q4
4,403
0
0
0.0
2010 Q3
5,840
0
0
0.0
2010 Q2
11,428
1
1
87.5
Show 8 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2010 Q1
9,499
0
0
0.0
2009 Q4
5,025
0
0
0.0
2009 Q2
8,097
0
0
0.0
2009 Q1
12,869
3
0
233.1
2008 Q4
13,356
0
0
0.0
2008 Q3
12,706
0
0
0.0
2008 Q2
7,722
10
5
1295.0
2008 Q1
1,913
4
1
2091.0
No fatalities recorded at this mine.
Reportable incidents
5 on file
2011 · 4 incidents
December 20, 2011AL · Coalfront-end loader, scraper-loader operator, pan operator, payloader, scraper rig operatorSLIP OR FALL OF PERSON
Operator was climbing down from machine, when his foot slipped off this rail steps on dozer. The injury occured after a rain. The rail steps were wet and muddy. The operator boots were muddy.