MSHA record for Mill Creek Mine (mine ID 0101986). Fatalities, non-fatal incidents grouped by year, current operator and controller, and mine context.
Email me when a new MSHA incident is filed at Mill Creek Mine.
EMPL PULLING FUEL HOSE OFF SERVICE TRUCK AND STRAINED HIS BACK.
EMPLOYEE WASLKED AROUND THE SERVICE TRUCK RO TURN OFF THE AIR COMPRESSOR HE BLACKED OUT & FELL TO THE GROUND STRIKING HIS HEAD ON THE GROUND LACERATION REQUIRED STITCHES HE WAS FOUND TO HAVE LOW BLOOD SUGAR & EAR INFECTION
EMPLOYEE SLIPPED WHILE GETTING OFF THE LOADER HE STRUCK HIS KNEE ON THE LADDERR
EMPLOYEE WAS LIFTING THE DUST BOX FROM THE DUST SYSTEM ON THE DRILL.
EMPLOYEE S HAND WAS CAUGHT BY THE TUB WIPER CABLE BRUSH.
EMP WAS STANDIN1 ON THE HOIST MOTOR OF THE 1570 DRAGLINE WHEN AN AIR HOSE CAME LOOSE AND STRUCK HIM CAUSING HIM TO FALL TO THE FLOOR OF THE MACHINE
EMPLOYEE WAS TI1HTENING FAIRLEAD INJECTOR-HIS WRENCH SLIPPED AND HIS HAND STRUCK ANOTHER INJECTOR.
OXYGEN HOSE BUR8TED AND CAUGHT FIRE.
EMPLOYEE WAS IN8TALLING A RADIATOR IN THE D10 DOZER. HE STEPPED DOWN TO GET A TOOL FROM HIS TRUCK. HE FELL WHILE STEPPING DOWN,
EMPLOYEE WAS HE5TING A PIECE OF METAL ON THE DRILL WHEN HE CAUGHT HIS FINGER BETWEEN THE BOOM AND T HE TRAVEL CHAIN
EMPL USING PRY 6AR TO LIFT ROLLER FRAME.BAR SLIPPED AND STRUCK KNEE CAP.
EMPLOYEE WAS GR3NDING METAL SLIVERS OF METAL WENT BEHIND HIS SAFETY GLASSES AND INTO HIS EYES
EMPLOYEE WAS CL3MBING ONTON THE DOZER. HIS FOOT SLIPPED CAUSING HIS LEFT LEG TO STRIKE THE PUSH ARM.
EMPL TIGHTENING3BOLT ON SWING BRAKE AND WRENCH SLIPPED OFF AND STRUCK HIM ABOVE EYE.
REPAIR WORK BEI3G DONE ON DRAGLINE.EMPL WALKING AROUND TOP OF TUB TO START WORK ON SHIFT AND STEPPED IN MANHOLE IN TOP OF TUB.
REPAIRING DRAGL3NE EMPL JUMPED FROM REVOLVING FRAME ONTO TUB AND INJURED HIS BACK.
EMP WAS CRIMPIN1 A WELDING CABLE THE CRIMPER CAME IN CONTACT WITH THE WELDING CABLE GROUND CAUSING AN ARC THE ARC THROUGH THE CRIMPER BURNED HIS HAND
EMP WAS HELPING3AN ELECTRICIAN CRIMP A WELDING CABLE THE CRIMPER CAME IN CONTACT WITH THE WELDING CABLE GROUND CAUSING AN ARC THE ARC FLASH BURNED THE EMPLOYEES EYES
EMPL STACKING X1TIES GOT FINGER WEDGED BETWEEN TIES.
EMPLOYEE WAS STRIKING A LOCK NUT SEAL WITH A HAMMER AND A SMALL PIECE OF METAL WENT INTO HIS LEFT EYE.
EMPLOYEE WAS BURNING A STEEL PLATE ON THE BURNING TABLE STEEL PLATE DROPPED OFF ON HIS FOOT
EMP WAS CHANGING DUST FILTERS ON THE RR 10 DRILL THE BOTTOM HALF OF THE FILTER CASE CAME LOOSE AND STRUCK EMP IN THE FACE
EE STEPPED FROM THE DRILL INTO A HOLE IN THE GROUND- EE TURNED HIS NAKLE.
A DEFLECTOR PLATE WAS BEING INSTALLED ATTHE HEAD OF THE RADIAL STACKER BELT WHEN THE BELT WAS STARTED EMPLOYEES GLOVE CAUGHT IN THE HEAD PULLEY
EMPLOYEE WAS DRIVING DOWN AN INCLINE ON THE WET ACCESS ROAD TO THE PIT - HE WAS TURNING TO THE LEFT AND APPLIED THE BRAKES - THE TRUCK SLID SIDEWAYS AND TURNED OVER ON ITS SIDE
EMPLOYEE STRUCK HIS HAND WHILE USING A SLEDGE HAMMER. EMPLOYEE WAS HAMMERING ON A GREASE PUMP IN A 55 GAL DRUM.
EMPL STRUCK HAND AGAINST PIECE OF SHEET METAL WHILE WORKING AT SCREENING PLANT.
EMPLOYEE WAS WASHING UT FROM UNDER BELT LINE-HE WAS LEANED OVER AND RAISED UP TO SOON AND HT HIS HEAD ON THE STEEL PLATFORM
EMPLOYEE WAS GETTING INTO THE TROOP TRUCK TO BE TRANSPORTED TO THE PARKING AREA THE DOOR CLOSED ON HIS MIDDLE FINGER ON HIS LEFT HAND.
EMPLOYEE WAS CHANGING DRILL BIT THE BIT FELL AND STRUCK HIS SMALL FINGER ON THE LEFT HAND CUT FINGER
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.