Mining Incidents

Mine No 4: 29 MSHA citations Coal

Controlled by James C Justice III
Rosedale, Anderson County, TN  ·  Abandoned
MSHA Mine ID: 4003206

Mine No 4 has $2K in proposed MSHA penalties and $60 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Mine No 4.

Fatalities
0
Total incidents
2
Years on record
2004
Latest incident
Oct 2004
Compliance record
MSHA citations since 2003
29
citations
2
significant & substantial
$1,786
proposed penalties
$1,726
paid to date
97% of proposed penalties paid to date, a $60 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2003
11
inspections on record
210
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 210 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Mine No 4 has $2K in proposed MSHA penalties and $60 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2K
proposed penalties
$2K
current assessed
$2K
paid to date
$60
outstanding
29 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2004-05-05.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
6.9%
significant & substantial
0.0%
high negligence or reckless
6.9%
reasonably likely or greater
0.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 100.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

MSHA sampling at Mine No 4 shows 100% of 14 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2004-10-27, 21 years ago
100%
within 1.5 mg/m3
14
samples
0.84
dust max (mg/m3)
13 samples taken by MSHA inspectors, 1 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR3
  • HIGHLIFT OPERATOR/FRONT END LOADER3
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE3

Silica (quartz)

Last sampled: 2004-05-05, 22 years ago
19.4
silica avg (%)
1
samples
19.4
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR1

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2003-10-01, 22 years ago
0%
over PEL
6
samples
Most-sampled occupations
  • BULLDOZER OPERATOR2
  • COAL DRILL OPERATOR1
  • HIGHLIFT OPERATOR/FRONT END LOADER1
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2004 100% 7
2003 100% 7
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Mine No 4 recorded 8.10 reportable injury cases per 100 full-time workers in 2004.

Injury rate, 2004
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
8.10
total case rate
8.10
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 5.57 and the all-US-mining average was 4.33 cases per 100 workers.
In Tennessee, coal mining averaged 4.35 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. National Coal Corporation 2003 to 2010
  2. Premium Coal Company Inc 2010 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2005 0
2004 22 99,519
2003 16 40,428
Source: MSHA quarterly employment and production, updated weekly.

Mine No 4 sits in Anderson County, Tennessee, where the Census mining category is 0.2% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Anderson County, Tennessee · Population 78,175
0.2%
Mining share of county employment
$63,171
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2005 Q3 0 0 0
2005 Q2 0 0 0
2005 Q1 0 0 0
2004 Q4 9,676 0 0 0.0
2004 Q3 14,369 0 0 0.0
2004 Q2 12,537 11 0 877.4
2004 Q1 12,827 0 0 0.0
2003 Q4 13,512 9 2 666.1
Show 1 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2003 Q3 6,160 6 0 974.0
No fatalities recorded at this mine.

Reportable incidents

2 on file

2004 · 2 incidents

October 15, 2004 TN · Coal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
National Coal Corporation · Struck by... (Not Elsewhere Classified)

THE EMPLOYEE WAS OPERATING COAL CRUSHER AND A LG. PIECE OF COAL FROM THE BELT MASHED HIS RT. THUMB.

August 11, 2004 TN · Coal greaser, grease man, oiler, lube man, dragline oiler SLIP OR FALL OF PERSON
National Coal Corporation · Over-exertion (Not Elsewhere Classified)

WHILE GREASING EQUIPMENT EMPLOYEE STATES HE TWISTED HIS LEFT KNEE. HIS KNEE WAS SWOLLEN AND SORE.