Mining Incidents

Mountain States Crusher GCP 3164: 60 MSHA citations Metal/Non-Metal

Controlled by Neil Jackson
Los Lunas, Valencia County, NM  ·  Active
MSHA Mine ID: 2902277

Mountain States Crusher GCP 3164 has $11K in proposed MSHA penalties and $288 outstanding across 8 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Mountain States Crusher GCP 3164.

Fatalities
0
Total incidents
7
Years on record
2016–2025
Latest incident
Jul 2025
Compliance record
MSHA citations since 2008
60
citations
7
significant & substantial
$10,956
proposed penalties
$9,902
paid to date
90% of proposed penalties paid to date, a $1,054 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2006
40
inspections on record
590
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 590 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Mountain States Crusher GCP 3164 has $11K in proposed MSHA penalties and $288 outstanding across 8 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$11K
proposed penalties
$10K
current assessed
$10K
paid to date
$288
outstanding
59 assessments are final orders; 8 contested dockets.
Of $4K in penalties contested before the Commission, $3K was upheld in final decisions.
As of the most recent assessment on 2025-11-25.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
11.7%
significant & substantial
8.3%
high negligence or reckless
11.7%
reasonably likely or greater
56.7%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 6.7% low, 85.0% moderate, 8.3% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
10 citations taken to the federal commission · 17% of citations on record
  • Settled 8 · 80%
  • Stood as issued 1 · 10%
  • Still open 1 · 10%
50%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 2 decided S&S contests · industry: 79%
19%
Penalty reduction in decided contests
$4K proposed, $3K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2025-12-14.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2014-0596 Settlement Miller 2015 $3K → $2K
CENT 2010-706M Settlement Lesnick 2013 $285 → $100
CENT 2018-0460 Settlement Simonton 2019 $236 → $236
CENT 2014-0575 Settlement Lesnick 2015 $200 → $200
CENT 2025-0218 Settlement Bulluck 2025 $151 → $151
CENT 2015-0620 Dismissal Lesnick 2016 $100 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2025-09-10
13%
of limit-tested samples over the exposure limit
23
samples
8
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz101 over
  • Respirable dust, <.1mg7
  • Unlisted Particulate, respirable, <1% Qtz4
  • Nuisance dust, respirable, <1% Qtz2
Show the individual readings (23)
Date Contaminant Concentration Limit Conc / limit Occupation
2007-04-26 Quartz, respirable, >1% Qtz 0.93 0.9 1.03 Cleanup Man
2025-09-10 Quartz, respirable, >1% Qtz 0.44 Bobcat Operator
2025-09-10 Respirable dust, <.1mg 0 Front-end Loader Operator
2024-05-30 Nuisance dust, respirable, <1% Qtz 0.17 10 0.02 Front-end Loader Operator
2024-05-30 Quartz, respirable, >1% Qtz 0.57 Bobcat Operator
2024-05-30 Respirable dust, <.1mg 0 Front-end Loader Operator
2022-10-26 Unlisted Particulate, respirable, <1% Qtz 0.29 Bobcat Operator
2022-10-26 Quartz, respirable, >1% Qtz 0.36 Laborer, Bullgang
2022-10-26 Respirable dust, <.1mg 0 Front-end Loader Operator
2021-01-07 Unlisted Particulate, respirable, <1% Qtz 0.32 Laborer, Bullgang
2021-01-07 Quartz, respirable, >1% Qtz 1.03 Laborer, Bullgang
2021-01-07 Respirable dust, <.1mg 0 Rotary Bucket Ex. Operator
2018-07-27 Respirable dust, <.1mg 0 Truck Driver
2018-07-27 Nuisance dust, respirable, <1% Qtz 0.73 10 0.07 Cleanup Man
2018-07-27 Respirable dust, <.1mg 0 Backhoe Operator
2013-02-14 Unlisted Particulate, respirable, <1% Qtz 0.41 Truck Driver
2013-02-14 Unlisted Particulate, respirable, <1% Qtz 0.4 Utility Man
2013-02-14 Quartz, respirable, >1% Qtz 0.62 2.81 0.22 Crusher Oper/Worker
2010-02-18 Quartz, respirable, >1% Qtz 0.28 1.02 0.27 Cleanup Man
2010-02-18 Quartz, respirable, >1% Qtz 0.5 1.63 0.31 Cleanup Man
2010-02-18 Quartz, respirable, >1% Qtz 0.29 1.22 0.24 Laborer, Bullgang
2007-04-26 Quartz, respirable, >1% Qtz 0.64 0.8 0.80 Cleanup Man
2007-04-26 Respirable dust, <.1mg 0 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Mountain States Crusher GCP 3164 recorded 5.35 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
5.35
total case rate
0.00
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In New Mexico, metal and nonmetal mining averaged 1.71 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 5.35 0.00 0.000
2024 * 0.00 0.00 0.000
2023 * 0.00 0.00 0.000
2022 * 2.95 2.95 0.000
2021 * 4.26 0.00 0.000
2020 * 8.71 0.00 0.000
2019 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Mountain States Constructors Inc 2005 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 28
2025 25
2024 24
2023 23
2022 25
2021 18
2020 15
2019 13
2018 11
2017 10
2016 9
2015 8
2014 7
2013 7
2012 8
2011 6
2010 10
2009 10
2008 3
2007 6
2006 4
2005 0
Source: MSHA quarterly employment and production, updated weekly.

Mountain States Crusher GCP 3164 sits in Valencia County, New Mexico, where the Census mining category is 0.2% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Valencia County, New Mexico · Population 77,382
0.2%
Mining share of county employment
$58,333
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 21,990 0 0 0.0
2026 Q1 19,560 0 0 0.0
2025 Q4 17,354 2 0 115.2
2025 Q3 24,297 4 1 164.6
2025 Q2 18,852 0 0 0.0
2025 Q1 14,301 5 0 349.6
2024 Q4 13,053 0 0 0.0
2024 Q3 14,054 0 0 0.0
Show 70 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 17,136 4 3 233.4
2024 Q1 15,402 0 0 0.0
2023 Q4 15,566 3 0 192.7
2023 Q3 22,158 2 0 90.3
2023 Q2 12,224 0 0 0.0
2023 Q1 10,165 0 0 0.0
2022 Q4 16,605 2 0 120.4
2022 Q3 20,919 0 0 0.0
2022 Q2 18,846 0 0 0.0
2022 Q1 11,335 0 0 0.0
2021 Q4 14,826 1 0 67.4
2021 Q3 11,737 2 1 170.4
2021 Q2 11,107 0 0 0.0
2021 Q1 9,227 3 0 325.1
2020 Q4 16,401 0 0 0.0
2020 Q3 10,163 0 0 0.0
2020 Q2 10,213 0 0 0.0
2020 Q1 9,158 0 0 0.0
2019 Q4 14,464 1 0 69.1
2019 Q3 9,304 0 0 0.0
2019 Q2 9,658 0 0 0.0
2019 Q1 7,378 0 0 0.0
2018 Q4 7,647 1 0 130.8
2018 Q3 9,380 4 0 426.4
2018 Q2 6,466 0 0 0.0
2018 Q1 5,660 1 0 176.7
2017 Q4 6,486 0 0 0.0
2017 Q3 5,556 2 0 360.0
2017 Q2 5,944 0 0 0.0
2017 Q1 4,800 0 0 0.0
2016 Q4 5,738 0 0 0.0
2016 Q3 5,677 0 0 0.0
2016 Q2 2,416 1 0 413.9
2016 Q1 3,238 1 0 308.8
2015 Q4 3,447 0 0 0.0
2015 Q3 7,884 2 0 253.7
2015 Q2 8,904 0 0 0.0
2015 Q1 5,205 1 0 192.1
2014 Q4 4,810 0 0 0.0
2014 Q3 4,585 2 0 436.2
2014 Q2 5,380 0 0 0.0
2014 Q1 3,959 0 0 0.0
2013 Q4 2,920 0 0 0.0
2013 Q3 2,310 0 0 0.0
2013 Q2 5,312 1 0 188.3
2013 Q1 4,080 3 0 735.3
2012 Q4 4,888 0 0 0.0
2012 Q3 6,169 0 0 0.0
2012 Q2 4,409 0 0 0.0
2012 Q1 4,505 3 0 665.9
2011 Q4 3,960 0 0 0.0
2011 Q3 1,800 0 0 0.0
2011 Q2 1,976 0 0 0.0
2010 Q4 5,374 0 0 0.0
2010 Q3 5,427 2 0 368.5
2010 Q2 4,396 0 0 0.0
2010 Q1 3,395 3 0 883.7
2009 Q1 2,966 0 0 0.0
2008 Q4 3,788 0 0 0.0
2008 Q3 2 0 0 0.0
2008 Q2 1 0 0 0.0
2008 Q1 2 1 0 500000.0
2007 Q4 2 0 0 0.0
2007 Q3 2 0 0 0.0
2007 Q2 275 0 0 0.0
2007 Q1 2,951 0 0 0.0
2006 Q4 1,018 0 0 0.0
2006 Q3 335 0 0 0.0
2006 Q1 0 0 0
2005 Q3 0 0 0
No fatalities recorded at this mine.

Reportable incidents

7 on file

2025 · 2 incidents

July 14, 2025 NM · Metal/Non-Metal miner, prospector, nec MACHINERY
Mountain States Constructors Inc · Caught in, under or between running or meshing objects

Employee drilling a 1/2" hole. Drill bit snagged a thin wire and wrapped it around. when this happens the loose end of wire away from drill bit wrapped around employee finger causing a laceration

May 16, 2025 NM · Metal/Non-Metal miner, prospector, nec MACHINERY
Mountain States Constructors Inc · Struck by flying object

Employee was re-tightened a hose connection on the ground next to a 300 cone. Gathering belt was feeding the 300 cone crusher with 5-7" rock. A rock bounded out of cone and landed on employee left hand while they were re-tightening the water hose.

2022 · 1 incident

April 1, 2022 NM · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Mountain States Constructors Inc · Over-exertion (Not Elsewhere Classified)

Employee claims EE got a hernia at work. EE reported it on 06/28/2022. Employee does not know when it happen, mentioned it happen on April. Did not indicate what EE was doing to cause a hernia.

2021 · 1 incident

August 31, 2021 NM · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer DISORDERS (REPEATED TRAUMA)
Mountain States Constructors Inc · Over-exertion (Not Elsewhere Classified)

Employee complaining of bi-lateral knee pain from climbing onto equipment. Employee did not report incident and it is unclear what day or time it begun.

2020 · 2 incidents

September 18, 2020 NM · Metal/Non-Metal outside foreman, leadman HANDLING OF MATERIALS
Mountain States Constructors Inc · Over-exertion (Not Elsewhere Classified)

Employee was kneeling down near a switch gear box. Another worker was getting ready to turn on switch, when EE did it made a noise and startled employee and caused employee to jerk left left arm, pain followed immediately after this in the shoulder.

August 13, 2020 NM · Metal/Non-Metal water truck operator SLIP OR FALL OF PERSON
Mountain States Constructors Inc · Fall to the walkway or working surface

Employee operating a water truck, drove to pond to fill up. Drive way at pond has some water that was from overfilling water truck. Employee got out of truck, when EE stepped onto the puddle EE didn't realize that there was a pot hole and lost EE's balance and fell down hurting EE's right ankle.

2016 · 1 incident

March 3, 2016 NM · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Mountain States Constructors Inc · Caught in, under or between a moving and a stationary object

Two man operation, Changing 5/8 screen on # 2 screen feed, employees were placing screen in place on top of screen deck, while pulling screen in place the screen slipped and pinched right pinky finger, between screen and head pulley guard.