Mining Incidents

Nally & Gibson Georgetown, LLC: 301 MSHA citations Metal/Non-Metal

Georgetown, Scott County, KY  ·  Active
MSHA Mine ID: 1500072

Nally & Gibson Georgetown, LLC has $59K in proposed MSHA penalties and $302 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Nally & Gibson Georgetown, LLC.

Fatalities
0
Total incidents
78
Years on record
1984–2026
Latest incident
May 2026
Compliance record
MSHA citations since 2000
301
citations
97
significant & substantial
$58,968
proposed penalties
$58,666
paid to date
99% of proposed penalties paid to date, a $302 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
189
inspections on record
5,065
inspection hours
5.9
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
301 citations across 5,065 inspection hours.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
1
Section 107(a) orders
Most recent order: 2014-07-24.
On record since 2014.
Source: MSHA imminent-danger order records, updated weekly.

Nally & Gibson Georgetown, LLC has $59K in proposed MSHA penalties and $302 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$59K
proposed penalties
$59K
current assessed
$59K
paid to date
$302
outstanding
295 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-07-24.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
32.4%
significant & substantial
3.3%
high negligence or reckless
32.4%
reasonably likely or greater
40.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 6.7% low, 90.0% moderate, 3.3% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-02-11
14%
of limit-tested samples over the exposure limit
181
samples
149
limit-tested
Most sampled contaminants
  • Diesel particulate (total carbon)6611 over
  • Total Carbon,TC158 over
  • Total Carbon,calculated from elemental carbon.157 over
  • Diesel Particulate Material51 over
Show the individual readings (100)
Date Contaminant Concentration Limit Conc / limit Occupation
2025-01-23 TC @ 160 237 160 1.48 Scaling (mechanical)
2025-01-23 EC @ 160 186 160 1.16 Scaling (mechanical)
2022-06-28 TC @ 160 352 160 2.20 Drill Operator, Rotary
2022-06-28 TC from EC @ 160 170 160 1.06 Drill Operator, Rotary
2022-06-28 TC @ 160 264 160 1.65 Front-end Loader Operator
2022-06-28 EC @ 160 177 160 1.11 Front-end Loader Operator
2015-06-02 TC @ 160 218 160 1.36 Truck Driver
2010-09-21 TC @ 160 174 160 1.09 Scaling (mechanical)
2010-07-21 TC @ 160 296 160 1.85 Scaling (mechanical)
2010-07-21 TC from EC @ 160 227 160 1.42 Scaling (mechanical)
2010-04-22 EC @ 160 222 160 1.39 Drill Operator, Jumbo Perc.
2010-04-22 TC @ 160 484 160 3.03 Drill Operator, Jumbo Perc.
2010-04-22 TC @ 160 225 160 1.41 Blaster, Powder Gang
2010-04-22 EC @ 160 167 160 1.04 Blaster, Powder Gang
2010-04-22 EC @ 160 218 160 1.36 Scaling (mechanical)
2010-04-22 TC from EC @ 160 217 160 1.36 Blaster, Powder Gang
2010-04-22 TC @ 160 371 160 2.32 Scaling (mechanical)
2009-03-12 TC from EC @ 160 191 160 1.19 Blaster, Powder Gang
2009-03-12 TC @ 160 205 160 1.28 Blaster, Powder Gang
2009-03-12 EC @ 160 165 160 1.03 Blaster, Powder Gang
2009-03-12 TC @ 160 280 160 1.75 Supervisor, Co. Official
2009-03-12 EC @ 160 236 160 1.48 Supervisor, Co. Official
2007-12-18 TCarbon @ 350 490.68 350 1.40 Scaling (mechanical)
2005-07-07 Diesel Particulate Material 312.83 308 1.02 Drill Operator, Rotary
2004-11-03 Total Carbon,TC 725 400 1.81 Blaster, Powder Gang
2004-03-04 Total Carbon,calculated from elemental carbon. 552 400 1.38 Blaster, Powder Gang
2004-03-04 Total Carbon,TC 677 400 1.69 Blaster, Powder Gang
2003-10-22 Total Carbon,calculated from elemental carbon. 434 400 1.09 Blaster, Powder Gang
2003-10-22 Total Carbon,TC 467.33 400 1.17 Blaster, Powder Gang
2002-11-06 Total Carbon,calculated from elemental carbon. 638.01 400 1.60 Utility Man
2002-11-06 Total Carbon,calculated from elemental carbon. 590.61 400 1.48 Truck Driver
2002-11-06 Total Carbon,TC 616.01 400 1.54 Truck Driver
2002-11-06 Total Carbon,calculated from elemental carbon. 1089.26 400 2.72 Front-end Loader Operator
2002-11-06 Total Carbon,calculated from elemental carbon. 480.07 400 1.20 Blaster, Powder Gang
2002-11-06 Total Carbon,TC 601.23 400 1.50 Utility Man
2002-11-06 Total Carbon,calculated from elemental carbon. 499.93 400 1.25 Truck Driver
2002-11-06 Total Carbon,TC 477.97 400 1.19 Blaster, Powder Gang
2002-11-06 Total Carbon,TC 1461.09 400 3.65 Front-end Loader Operator
2002-11-06 Total Carbon,TC 636.99 400 1.59 Truck Driver
2026-02-11 Quartz, respirable, >1% Qtz 0.14 Drill Operator, Rotary
2026-02-11 Nuisance dust, respirable, <1% Qtz 0.37 10 0.04 Roof Bolter, Mounted
2026-02-11 Quartz, respirable, >1% Qtz 1.3 3.03 0.43 Crusher Oper/Worker
2026-02-11 Nuisance dust, respirable, <1% Qtz 0.64 10 0.06 Scaling (mechanical)
2026-02-10 Respirable dust, <.1mg 0 Crusher Oper/Worker
2026-02-10 Quartz, respirable, >1% Qtz 0.51 Utility Man
2026-02-10 Nuisance dust, respirable, <1% Qtz 0.25 10 0.03 Truck Driver
2026-02-10 Respirable dust, <.1mg 0 Front-end Loader Operator
2026-02-06 ORGANIC CARBON 0 Blaster, Powder Gang
2026-02-06 EC @ 160 0 160 0.00 Drill Operator, Rotary
2026-02-06 ORGANIC CARBON 0 Drill Operator, Rotary
2026-02-06 TC @ 160 0 160 0.00 Blaster, Powder Gang
2026-02-06 TC from EC @ 160 0 160 0.00 Blaster, Powder Gang
2026-02-06 ORGANIC CARBON 0 Roof Bolter, Mounted
2026-02-06 TC @ 160 0 160 0.00 Roof Bolter, Mounted
2026-02-06 EC @ 160 0 160 0.00 Blaster, Powder Gang
2026-02-06 TC @ 160 0 160 0.00 Drill Operator, Rotary
2026-02-06 TC from EC @ 160 0 160 0.00 Roof Bolter, Mounted
2026-02-06 EC @ 160 0 160 0.00 Roof Bolter, Mounted
2026-02-06 TC from EC @ 160 0 160 0.00 Drill Operator, Rotary
2025-10-08 Nuisance dust, respirable, <1% Qtz 2.71 10 0.27 Front-end Loader Operator
2025-10-08 Quartz, respirable, >1% Qtz 0.64 Crusher Oper/Worker
2025-10-08 Respirable dust, <.1mg 0 Roof Bolter, Mounted
2025-10-08 Quartz, respirable, >1% Qtz 0.13 Scaling (mechanical)
2025-07-15 Nuisance dust, respirable, <1% Qtz 0.48 10 0.05 Drill Operator, Rotary
2025-02-20 ORGANIC CARBON 0 Scaling (mechanical)
2025-02-20 EC @ 160 0 160 0.00 Scaling (mechanical)
2025-02-20 TC from EC @ 160 0 160 0.00 Scaling (mechanical)
2025-02-20 TC @ 160 0 160 0.00 Scaling (mechanical)
2025-01-23 TC @ 160 130 160 0.81 Roof Bolter, Mounted
2025-01-23 EC @ 160 100 160 0.63 Roof Bolter, Mounted
2025-01-23 ORGANIC CARBON 0 Roof Bolter, Mounted
2025-01-23 TC from EC @ 160 0 160 0.00 Scaling (mechanical)
2025-01-23 ORGANIC CARBON 52 Scaling (mechanical)
2025-01-23 TC from EC @ 160 0 160 0.00 Roof Bolter, Mounted
2025-01-22 Nuisance dust, respirable, <1% Qtz 0.49 10 0.05 Truck Driver
2025-01-22 Nuisance dust, respirable, <1% Qtz 0.91 10 0.09 Truck Driver
2025-01-22 Nuisance dust, respirable, <1% Qtz 0.13 10 0.01 Front-end Loader Operator
2024-10-08 Respirable dust, <.1mg 0 Crusher Oper/Worker
2024-10-08 Respirable dust, <.1mg 0 Front-end Loader Operator
2024-10-08 Quartz, respirable, >1% Qtz 0.16 Truck Driver
2023-11-03 Nuisance dust, respirable, <1% Qtz 0.14 10 0.01 Truck Driver
2023-11-03 Respirable dust, <.1mg 0 Front-end Loader Operator
2023-11-03 Nuisance dust, respirable, <1% Qtz 0.16 10 0.02 Cleanup Man
2023-10-27 TC from EC @ 160 0 160 0.00 Blaster, Powder Gang
2023-10-27 ORGANIC CARBON 124 Drill Operator, Rotary
2023-10-27 TC from EC @ 160 0 160 0.00 Drill Operator, Rotary
2023-10-27 EC @ 160 33 160 0.21 Drill Operator, Rotary
2023-10-27 EC @ 160 34 160 0.21 Blaster, Powder Gang
2023-10-27 TC @ 160 157 160 0.98 Drill Operator, Rotary
2023-10-27 TC @ 160 67 160 0.42 Blaster, Powder Gang
2023-10-27 ORGANIC CARBON 33 Blaster, Powder Gang
2023-08-22 Nuisance dust, respirable, <1% Qtz 1.64 10 0.16 Blaster, Powder Gang
2023-03-29 Nuisance dust, respirable, <1% Qtz 0.91 10 0.09 Truck Driver
2023-03-29 Nuisance dust, respirable, <1% Qtz 0.27 10 0.03 Drill Operator, Rotary
2023-03-29 Nuisance dust, respirable, <1% Qtz 0.8 10 0.08 Crusher Oper/Worker
2023-03-29 Nuisance dust, respirable, <1% Qtz 0.22 10 0.02 Front-end Loader Operator
2023-03-01 ORGANIC CARBON 0 Front-end Loader Operator
2023-03-01 TC from EC @ 160 0 160 0.00 Front-end Loader Operator
2023-03-01 EC @ 160 0 160 0.00 Front-end Loader Operator
2023-03-01 TC @ 160 0 160 0.00 Front-end Loader Operator
Showing 100 of 361 laboratory readings: every over-limit reading, then the most recent. MSHA reads one air sample several times, so readings outnumber the samples counted above. The full set is in MSHA's Personal Health Samples file.

Area samples (mill and shop air)

Last sampled: 2026-02-06
12
samples
Show the individual readings (29)
Date Contaminant Concentration Limit Conc / limit Area sampled
2026-02-06 EC @ 160 0 UG SHAFT/STATION
2026-02-06 TC @ 160 0 UG SHAFT/STATION
2025-02-20 TC @ 160 0 UG TRAVEL/HAULAGE
2025-02-20 EC @ 160 0 UG TRAVEL/HAULAGE
2025-01-23 EC @ 160 180 UG TRAVEL/HAULAGE
2025-01-23 TC @ 160 0 UG TRAVEL/HAULAGE
2023-10-27 TC @ 160 0 UG ACTIVE MINING
2023-10-27 EC @ 160 0 UG ACTIVE MINING
2023-03-01 TC @ 160 0 UG SHAFT/STATION
2023-03-01 EC @ 160 0 UG SHAFT/STATION
2022-07-26 TC @ 160 0 UG TRAVEL/HAULAGE
2022-07-26 EC @ 160 0 UG TRAVEL/HAULAGE
2022-06-28 EC @ 160 322 UG TRAVEL/HAULAGE
2022-06-28 TC @ 160 395 UG TRAVEL/HAULAGE
2021-05-12 TC @ 160 0 UG GENERAL
2021-05-12 TC from EC @ 160 0 UG GENERAL
2021-05-12 EC @ 160 0 UG GENERAL
2015-06-02 TC @ 160 173 UG TRAVEL/HAULAGE AR
2015-06-02 EC @ 160 106 UG TRAVEL/HAULAGE AR
2015-06-02 TC from EC @ 160 0 UG TRAVEL/HAULAGE AR
2010-07-21 TC from EC @ 160 0 BOTTOM OF MINE EXH M
2010-07-21 TC @ 160 432 BOTTOM OF MINE EXH M
2010-07-21 EC @ 160 301 BOTTOM OF MINE EXH M
2010-04-22 EC @ 160 357 UG SHAFT/STATI AREA
2010-04-22 TC @ 160 463 UG SHAFT/STATI AREA
2010-04-22 TC from EC @ 160 0 UG SHAFT/STATI AREA
2009-03-12 EC @ 160 0 UG SHAFT/STATION
2009-03-12 TC @ 160 420 UG SHAFT/STATION
2009-03-12 TC from EC @ 160 0 UG Shaft/Station AR
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Nally & Gibson Georgetown, LLC recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Kentucky, metal and nonmetal mining averaged 2.16 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 5.65 2.83 0.000
2023 * 5.89 0.00 0.000
2022 * 2.88 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 3.26 3.26 0.000
2019 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Nally & Gibson Georgetown, LLC 1950 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 32
2025 32
2024 31
2023 32
2022 31
2021 31
2020 31
2019 31
2018 32
2017 32
2016 30
2015 29
2014 29
2013 27
2012 28
2011 24
2010 25
2009 31
2008 40
2007 40
2006 30
2005 32
2004 30
2003 35
2002 38
2001 52
2000 63
Source: MSHA quarterly employment and production, updated weekly.

Nally & Gibson Georgetown, LLC sits in Scott County, Kentucky, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Scott County, Kentucky · Population 58,269
0.0%
Mining share of county employment
$83,660
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 20,792 2 0 96.2
2026 Q1 18,666 2 0 107.1
2025 Q4 21,504 4 1 186.0
2025 Q3 20,189 3 0 148.6
2025 Q2 19,165 0 0 0.0
2025 Q1 16,759 1 1 59.7
2024 Q4 18,182 1 0 55.0
2024 Q3 19,441 2 2 102.9
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 19,533 2 0 102.4
2024 Q1 13,628 2 0 146.8
2023 Q4 17,876 1 0 55.9
2023 Q3 18,092 1 0 55.3
2023 Q2 18,266 2 0 109.5
2023 Q1 13,715 1 0 72.9
2022 Q4 18,197 3 0 164.9
2022 Q3 18,116 5 0 276.0
2022 Q2 16,840 2 1 118.8
2022 Q1 16,214 8 5 493.4
2021 Q4 17,359 10 1 576.1
2021 Q3 16,871 17 6 1007.6
2021 Q2 17,361 0 0 0.0
2021 Q1 13,430 1 1 74.5
2020 Q4 14,652 8 1 546.0
2020 Q3 15,961 6 0 375.9
2020 Q2 15,150 6 1 396.0
2020 Q1 15,521 3 1 193.3
2019 Q4 19,024 3 2 157.7
2019 Q3 18,715 0 0 0.0
2019 Q2 20,083 1 0 49.8
2019 Q1 15,388 2 0 130.0
2018 Q4 15,329 1 0 65.2
2018 Q3 18,092 2 2 110.5
2018 Q2 18,924 3 1 158.5
2018 Q1 13,148 0 0 0.0
2017 Q4 16,607 5 2 301.1
2017 Q3 19,582 3 0 153.2
2017 Q2 18,604 2 0 107.5
2017 Q1 18,186 2 0 110.0
2016 Q4 21,523 5 1 232.3
2016 Q3 17,455 5 3 286.5
2016 Q2 17,822 1 0 56.1
2016 Q1 17,373 3 1 172.7
2015 Q4 18,272 3 2 164.2
2015 Q3 17,030 3 1 176.2
2015 Q2 16,837 1 0 59.4
2015 Q1 11,290 1 0 88.6
2014 Q4 16,524 0 0 0.0
2014 Q3 16,570 3 1 181.1
2014 Q2 18,012 4 1 222.1
2014 Q1 13,449 0 0 0.0
2013 Q4 16,926 4 3 236.3
2013 Q3 17,030 2 1 117.4
2013 Q2 16,899 3 0 177.5
2013 Q1 8,828 0 0 0.0
2012 Q4 14,981 2 0 133.5
2012 Q3 17,039 2 0 117.4
2012 Q2 15,139 3 1 198.2
2012 Q1 8,796 1 0 113.7
2011 Q4 9,917 1 0 100.8
2011 Q3 15,648 3 1 191.7
2011 Q2 13,245 1 0 75.5
2011 Q1 8,883 1 0 112.6
2010 Q4 8,245 2 0 242.6
2010 Q3 17,300 2 0 115.6
2010 Q2 14,969 5 4 334.0
2010 Q1 8,609 1 0 116.2
2009 Q4 15,253 2 0 131.1
2009 Q3 19,071 1 0 52.4
2009 Q2 19,387 2 2 103.2
2009 Q1 12,254 7 2 571.2
2008 Q4 20,645 2 0 96.9
2008 Q3 20,313 3 0 147.7
2008 Q2 25,591 1 0 39.1
2008 Q1 23,866 1 0 41.9
2007 Q4 25,947 0 0 0.0
2007 Q3 27,998 1 0 35.7
2007 Q2 23,145 3 0 129.6
2007 Q1 19,877 1 0 50.3
2006 Q4 18,195 2 0 109.9
2006 Q3 17,526 8 3 456.5
2006 Q2 17,268 1 0 57.9
2006 Q1 16,758 0 0 0.0
2005 Q4 19,148 3 2 156.7
2005 Q3 20,781 0 0 0.0
2005 Q2 19,500 1 1 51.3
2005 Q1 16,945 0 0 0.0
2004 Q4 18,848 0 0 0.0
2004 Q3 18,631 0 0 0.0
2004 Q2 17,222 0 0 0.0
2004 Q1 14,974 1 1 66.8
2003 Q4 19,022 1 0 52.6
2003 Q3 17,634 1 0 56.7
2003 Q2 19,299 1 0 51.8
2003 Q1 18,052 6 4 332.4
2002 Q4 19,524 2 2 102.4
2002 Q3 19,223 0 0 0.0
2002 Q2 16,594 0 0 0.0
2002 Q1 17,557 0 0 0.0
2001 Q4 26,782 4 0 149.4
2001 Q3 25,847 3 2 116.1
2001 Q2 25,185 4 1 158.8
2001 Q1 21,317 9 4 422.2
2000 Q4 29,089 16 7 550.0
2000 Q3 27,292 6 2 219.8
2000 Q2 31,357 13 10 414.6
2000 Q1 21,847 2 2 91.5
No fatalities recorded at this mine.

Reportable incidents

78 on file

2026 · 1 incident

May 13, 2026 KY · Metal/Non-Metal outside foreman, leadman HANDTOOLS (NONPOWERED)
Nally & Gibson Georgetown, LLC · Struck by... (Not Elsewhere Classified)

Employee was using a pipe wrench to disassemble a water pump. EE was pulling down on the wrench from overhead when the jaws slipped causing the handle to hit EE in the forehead. Employee sustained a laceration to the forehead requiring stitches.

2024 · 2 incidents

August 14, 2024 KY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Nally & Gibson Georgetown, LLC · Caught in, under or between a moving and a stationary object

Employee was in the process of changing screens. When EE tried to loosen the screen hold down clamp with a pry bar, EE mashed the end of EE's left ring finger on the frame edge, amputating the end of it.

January 11, 2024 KY · Metal/Non-Metal master mechanic, foreman, supervisor HANDLING OF MATERIALS
Nally & Gibson Georgetown, LLC · Over-exertion in lifting objects

Employee was attempting to relocate a water line and when lifting, pulled or tore something in right forearm.

2023 · 2 incidents

November 3, 2023 KY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Nally & Gibson Georgetown, LLC · Contact with hot objects or substances

Employee was cutting a hole in metal with a torch and the slag blew back and went under their eye protection. Employee sustained an eye injury to the ocular surface.

May 30, 2023 KY · Metal/Non-Metal miner, nec HANDLING OF MATERIALS
Nally & Gibson Georgetown, LLC · Struck by... (Not Elsewhere Classified)

Employee was loading ANFO from an overhead bin into a Powder Monkey truck. EE pushed the lever to open the bin and when EE released it, it swung back hitting EE in the mouth. Employee sustained a laceration on the lip and a chip in an upper right tooth.

2022 · 1 incident

June 14, 2022 KY · Metal/Non-Metal scoop tram operator, load/haul/dump operator POWERED HAULAGE
Nally & Gibson Georgetown, LLC · Struck against a moving object

Employee was driving a Caterpillar 773 down a slope and said the brake retarder kicked in and caused them to slide into a pillar. Employee said they hit their head on the steering wheel. Minor damage to the trucks handrail and mirror.

2020 · 1 incident

January 10, 2020 KY · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey HANDLING OF MATERIALS
Nally & Gibson Georgetown, LLC · Over-exertion in pulling or pushing objects

Blasters helper was loading a face with an ANFO hose and pulled something in elbow.

2016 · 2 incidents

July 21, 2016 KY · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey POWERED HAULAGE
Nally & Gibson Georgetown, LLC · Struck against a moving object

Employee was driving a 2001 International truck used to haul ANFO to load the shots down a 15 degree incline. The driver lost control of the truck due to wet conditions of the roadway causing it to slide down the slope and into a rib. The truck was extensively damaged. The employee had a laceration on head and some bruising.

April 13, 2016 KY · Metal/Non-Metal utility man, shift tech, service/dump truck operator HANDTOOLS (NONPOWERED)
Nally & Gibson Georgetown, LLC · Struck by... (Not Elsewhere Classified)

Employee was on knees using a utility knife to cut a conveyor belt when the knife slipped out of the belt and hit right knee causing a laceration.

2015 · 1 incident

October 21, 2015 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Nally & Gibson Georgetown, LLC · Struck by falling object

Employee was changing screen panels and removed his safety glasses for a moment and a piece of rust fell in his eye.

2013 · 1 incident

February 21, 2013 KY · Metal/Non-Metal utility man, errand boy, service truck operator SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Over-exertion (Not Elsewhere Classified)

Employee was raising a counterweight on a conveyor with a chain hoist when the chain broke he jumped back landing on a tool twisting his ankle.

2012 · 1 incident

May 7, 2012 KY · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Fall to the walkway or working surface

Employee was taking inventory of ANFO bags in a storage facility. He tripped on the plastic wrap holding the bags on the pallets striking his knee on the floor when he fell.

2010 · 1 incident

July 21, 2010 KY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Fall from machine

Employee parked the grease truck and was exiting the vehicle when his foot slipped off the step, causing him to fall to the ground, bruising his right lower back and right hip.

2009 · 1 incident

2007 · 2 incidents

August 13, 2007 KY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Over-exertion (Not Elsewhere Classified)

Employee's foot slipped off the step of a dump truck while exiting the vehicle causing him to sprain his ankle.

July 23, 2007 KY · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Nally & Gibson Georgetown, LLC · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE WAS ATTEMPTING TO HITCH A TRAILER TO A PICKUP WHEN THE TRAILER SHIFTED MASHING THE MIDDLE FINGER ON HIS LEFT HAND.

2003 · 3 incidents

June 3, 2003 KY · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Over-exertion (Not Elsewhere Classified)

EMPLOYEE WAS EXAMINING VEHICLE FOR DEFECTS. WHILE CLIMBING DOWN THE LADDER HE STATES HE TWISTED HIS ANKLE WHEN HE CONTACTED THE GROUND.

2001 · 1 incident

January 2, 2001 KY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator MACHINERY
Nally & Gibson Georgetown, LLC · Struck by... (Not Elsewhere Classified)

EE WAS USING A ROTARY HAMMER TO BREAK UP PACKED ROCK IN A BIN. HE WAS HOLDING HAMMER AGAINST HISCHEST WHILE IN USE.

2000 · 11 incidents

October 25, 2000 KY · Metal/Non-Metal miner, nec MACHINERY
Nally & Gibson Georgetown, LLC · Struck by falling object

EE WAS SCALING CEILING WHER A SMALL ROCK CAME THROUGH WINDOW OF SCALER AND HIT HIM ON LEFT HAND.

August 18, 2000 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Nally & Gibson Georgetown, LLC · Struck against stationary object

WHILE SHOVELING UNDER CONVEYOR BELT EE RAISED UP& HIT BACK ON CONVEYOR FRAME

April 21, 2000 KY · Metal/Non-Metal truck driver RESPIRATORY CONDITIONS (TOXIC AGENTS)
Nally & Gibson Georgetown, LLC · Inhalation of radiations, caustics, toxic and noxious substances

WHILE DRIVING WATER TRUCK TO WET DOWN MUCK PILES HE WAS OVERCOME BY EXHAUST FUMES.

April 5, 2000 KY · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer POWERED HAULAGE
Nally & Gibson Georgetown, LLC · Struck against a moving object

FRONT WHEEL OF TRUCK EE WAS DRIVING HIT A ROCK CAUSING STEERING WHEEL TO SPIN. ARM CAUGHT IN STEERING WHEEL CAUSING BREAK.

March 29, 2000 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Nally & Gibson Georgetown, LLC · Over-exertion (Not Elsewhere Classified)

HURT BACK WHILE STOOPING/BENDING TO CHANGE SCREENS IN ROCK BIN

March 16, 2000 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Nally & Gibson Georgetown, LLC · Caught in, under or between a moving and a stationary object

EE WAS DISLODGING CRUSTED STONE FROM ROCK BIN WITH IRON DIGGER. CAUGHT FINGER BETWEEN DIGGER &SIDE OF BIN & FRACTURED FINGER

March 2, 2000 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Nally & Gibson Georgetown, LLC · Struck by... (Not Elsewhere Classified)

EE WAS BEATING SIDE OF ROCK BIN WITH SLEDGE HAMMER TO DISLODGE ROCK CAUGHT THUMB BETWEEN SIDE OFBIN & HAMMER HANDLE

1999 · 11 incidents

November 3, 1999 KY · Metal/Non-Metal laborer, bull gang, parts runner, roustabout, roof trimmer/scaler DISORDERS (REPEATED TRAUMA)
Nally & Gibson Georgetown, LLC · Over-exertion (Not Elsewhere Classified)

EE SHOVELED ROCK 11/2/99 & 11/3/99. CLAIMED HE WAS HAVING PAIN IN RIGHT WRIST AT END OF DAY 11/3/99. HE DID NOT RECEIVE ANY TYPE OF INJURY. RELEASED BY DR TO RETURN TO WORK 11/22/99. DID NOT S HOW UP.

October 12, 1999 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Nally & Gibson Georgetown, LLC · Struck by... (Not Elsewhere Classified)

EE WAS SHOVELING ROCK IN SCREENING BIN WHEN A PIECE OF METAL FELL FROM THE BIN & STRUCK HIM ON THE HAND

July 28, 1999 KY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Nally & Gibson Georgetown, LLC · Struck by... (Not Elsewhere Classified)

WHILE CUTTING PIECE OF RUBBER HOSE WITH POCKET KNIFE BLADE FOLDED BACK & CUT FINGER

July 22, 1999 KY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator MACHINERY
Nally & Gibson Georgetown, LLC · Contact with hot objects or substances

WAS CUTTING OUT BOLTS PIECE OF HOT METAL FELL ONTO FOREARM CAUSING BURN

July 6, 1999 KY · Metal/Non-Metal beltman, conveyor man, conveyor belt worker, mobile bridge carrierman, feeder operator, conveyor rider SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Fall from ladders

EMPLOYEE WAS REPAIRING CONVEYER BELT AND SLIPPEDON LADDER WHILE COMING DOWN FROM BELT.

May 20, 1999 KY · Metal/Non-Metal outside foreman, leadman MACHINERY
Nally & Gibson Georgetown, LLC · Struck by flying object

CUTTING PIECE OF METAL WITH CUTTING TORCH, PIECEFLEW INTO EYE- WAS WEARING SAFETY GLASSES.

May 19, 1999 KY · Metal/Non-Metal beltman, conveyor man, conveyor belt worker, mobile bridge carrierman, feeder operator, conveyor rider SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Fall from machine

GETTING DOWN OFF TRUCK- SLIPPED AND HIT HEAD ON CORNER OF BED.

February 8, 1999 KY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Over-exertion (Not Elsewhere Classified)

FOOT SLIPPED ON RUNNING BOARD OF TRUCK CAUSING KNEE TO TWIST.

1998 · 6 incidents

October 14, 1998 KY · Metal/Non-Metal laborer, bull gang, parts runner, roustabout, roof trimmer/scaler SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Fall to the walkway or working surface

WALKING DOWN SLOPE TO START WATER PUMP. FOOT SLIPPED CAUSING HIM TO FALL AND HIT ELBOW ON ROCK.

August 24, 1998 KY · Metal/Non-Metal beltman, conveyor man, conveyor belt worker, mobile bridge carrierman, feeder operator, conveyor rider HANDLING OF MATERIALS
Nally & Gibson Georgetown, LLC · Over-exertion (Not Elsewhere Classified)

WHILE BENDING TO REPIAR CONVEYOR BELT HE FELT PAIN IN LOWER BACK.

June 15, 1998 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Fall down stairs

EMPLOYEE SLIPPED ON STEPS LEADING TO THE ROCK SCREENS AND HIT HIS HIP ON HAND RAIL.

April 8, 1998 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Nally & Gibson Georgetown, LLC · Over-exertion in lifting objects

STRAINED BACK MUSCLE WHILE SHOVELING ROCK FROM UNDER CONVEYOR BELT.

1997 · 3 incidents

December 22, 1997 KY · Metal/Non-Metal welder MACHINERY
Nally & Gibson Georgetown, LLC · Caught in, under or between a moving and a stationary object

EE WAS PINNED BETWEEN ROCK WALL AND CRANE TRUCK AS IT BACKED INTO POSITION TO LIFT CONVEYR. EXPECTED TO BE OFF WORK FOR 8-12 MONTHS DUE TO INJURY.

May 27, 1997 KY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Nally & Gibson Georgetown, LLC · Struck against a moving object

TRUCK STALLED ON HILL- ROLLED BACKWARD AND HIT ROCK WALL. DRIVER THROWN AROUND- HURT BACK.

April 30, 1997 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
Nally & Gibson Georgetown, LLC · Struck against a moving object

END LOADER STRUCK CONTROL SHACK WHERE INJURED WAS SITTING CAUSING SHACK TO TILT, THROWING INJURED AGAINST THE WALL.

1996 · 3 incidents

December 12, 1996 KY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Nally & Gibson Georgetown, LLC · Struck against a moving object

DRIVER FAILED TO NEGOTIATE CURVE ON DOWN GRADE. RAM OUT OF ROAD AND HIT WALL. TRUCK DAMAGE SEVERE. EXCESSIVE SPEED MAY BE CAUSE. INVESTIGATION IS BEING MADE.

June 4, 1996 KY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Nally & Gibson Georgetown, LLC · Caught in, under or between a moving and a stationary object

EE WAS USING SLEDGE HAMMER TO BEAT SIDE OF BIN TO FREE CLOGGED ROCK HAMMER SLIPPED AND CAUSED THUMB TO BE CAUGHT BETWEEN THE HANDLE AND THE STEEL BIN.

1995 · 4 incidents

December 21, 1995 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
Nally & Gibson Georgetown, LLC · Struck by falling object

WHILE SHOVELING CRUSHED STONE FROM UNDERNEATH PRIMARY CONVEYOR BELT EE WAS STRUCK ON HEAD BY ROCK WHICH FELL FROM CONVEYOR.

July 3, 1995 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Fall to the walkway or working surface

EMPLOYEE STEPPED OUT OF SWITCH BLDG. ONTO METAL STOOP. RAIN HAD MADE STOOP SLICK. HE SLIPPED & FELL.

May 25, 1995 KY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Nally & Gibson Georgetown, LLC · Fall from machine

EMPLOYEE JUMPED OFF REAR DUMP TRUCK TO GROUND AFTER TRUCK STALLED. BATTERY CABLE AND WORKED LOOSE CAUSING TRUCK TO QUIT.

May 19, 1995 KY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Nally & Gibson Georgetown, LLC · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE CAUGHT FINGER ON TRUCK CAB HORN PULL ROPE AS HE WAS GETTING OUT OF TRUCK - RING ON FINGER HUNG ON ROPE CATCHING SKIN AND PEELING IT BACK. SLIGHT FRACTURE ALSO OCCURRED.

1994 · 2 incidents

September 26, 1994 KY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Nally & Gibson Georgetown, LLC · Over-exertion in lifting objects

EMPLOYEE WAS SHOVELING WASTE MATERIAL FROM U;NDER PRIMARY CRUSHER BELT - FELT PAIN IN LOWER BACK - THOUGHT IT WOULD GET BETTER - DID NOT GO TO SEE DOCTOR UNTIL 10-13-94.

July 27, 1994 KY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Nally & Gibson Georgetown, LLC · Over-exertion in wielding or throwing objects

EMPLOYEE WAS BEATING OUT ROCK BINS WITH A SLEDGE HAMMER WHNE HE COMPLAINE DOF LWOER BACK PAINS AS A RESULT OF HTE HAMMERING.

1993 · 1 incident

September 24, 1993 KY · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer DISORDERS (REPEATED TRAUMA)
Nally & Gibson Georgetown, LLC · Over-exertion (Not Elsewhere Classified)

NO ACTUAL INJURY OCCURED. EMPLOYEE COMPLAINED OF SEVERE LOWER BACK PAIN. SAYS MOTION OF POWER SHOVEL HE HAS BEEN OPERATING HAS CAUSED HIS BACK TO HURT.

1992 · 4 incidents

June 5, 1992 KY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Fall onto or against objects

EMPLOYEE WAS USING HAMMER TO BEAT SIDE OF ROCK BIN TO LOOSEN CRUSHED STONE-FOOT SLIPPED CAUSING HIM TO FALL ACROSS A SUPPORT BEAM.

March 5, 1992 KY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator MACHINERY
Nally & Gibson Georgetown, LLC · Struck by... (Not Elsewhere Classified)

HOSE CAME OLOOSE FROM WRENCH ON AIR IMPACT WRENCH AND HIT EMPLOYEE ON THUMB.

January 15, 1992 KY · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Fall from machine

EMPLOYEE WAS GETTING DOWN FROM D8 BULLDOZER, SLIPPED AND FELL STRIKING BACK AGAINST TRACK.

1991 · 2 incidents

September 13, 1991 KY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Nally & Gibson Georgetown, LLC · Caught in, under or between a moving and a stationary object

EMPLOYEE WAS TRYING TO DISLODGE ROCK WITH BAR BAR SLIPPED CAUSING HIM TO PINCH RIGHT HAND BETWEEN BAR AND SIDE OF CRUSHER.

August 1, 1991 KY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Nally & Gibson Georgetown, LLC · Caught in, under or between two or more moving objects

EMPL CAUGHT LT HAND BETWEEN PULLEY & V BELT CAUSING INJURY.

1990 · 1 incident

January 26, 1990 KY · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Nally & Gibson Georgetown, LLC · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS HOLDING STAKE BEING DRIVEN BY FOREMAN WITH SLEDGE HAMMER- HAMMER SLIPPED HITTING LEFT INDEX FINGER.

1989 · 1 incident

1988 · 6 incidents

June 27, 1988 KY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Nally & Gibson Georgetown, LLC · Over-exertion in lifting objects

EMP. WAS LIFTING FALLEN ROCKS FROM BENEATH CONVEYOR BELT FELT PULIN LT SIDE.

March 8, 1988 KY · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Nally & Gibson Georgetown, LLC · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS CUTTING PIECE OF BELTING MATERIAL TO USE AS SIDE BELT FOR CONVEYOR WHEN KNIFE SLIPPED AND CUT LEG.

January 15, 1988 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Fall from machine

I NAME LOOKING 5T WATER PUMP STEPPED OUT OF HIS CAR MUST HAVE LEFT CAR IN GEAR IT STARTED ROLLING HE TRIED TO GET IN CAR AND STOP IT WAS KNOCKED DOWN AND INJURED LEFT KNEE AND RIGHT HAND NO WO RK TIME LOST. 3

January 13, 1988 KY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Fall onto or against objects

EMPL UNLOADING 4ATER PUMP FROM TRUCK.SLIPPED & FELL AGAINST TRUCK BED INJRED SIDE.

January 5, 1988 KY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Nally & Gibson Georgetown, LLC · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS HI7 ON WRIST BY AHMMER WHILE HOLDING METAL FOR SCREEN REPAIR.

1986 · 1 incident

January 3, 1986 KY · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Nally & Gibson Georgetown, LLC · Struck by... (Not Elsewhere Classified)

DURING CLEAN UP3GOING ON DURING MAINTENANCE & REPAIR WORK LOADER OPERATION WAS PULLING A STEEL BEAM THE BEAM FLIPPED OVER AND HIT LABORER ON FOOT.

1984 · 2 incidents

November 20, 1984 KY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Nally & Gibson Georgetown, LLC · Fall from machine

EMPLOYEE WAS ON LADDER OF CONCRETE TRUCK CHECKING CONTENTS OF CONE & STARTED TO FALL & PUSH SELF FROM LADDER IN A JUMP CAUSING TORN CARTILAGE IN RIGHT KNEE

September 4, 1984 KY · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Nally & Gibson Georgetown, LLC · Over-exertion in lifting objects

EMPLOYEE DRIVES READY MIXED CONC TRUCK WHILE POURING CONCRETE HE LIFTED THE CHUTE OF THE CONCRETE TRUCK CAUSING A HERNIA.