MSHA record for NAUMANN'S EQUIP CO INC (mine ID 4103351). Fatalities, non-fatal incidents grouped by year, current operator and controller, and mine context.
Watch this mine
Email me when a new MSHA incident is filed at NAUMANN'S EQUIP CO INC.
Fatalities
0
Total incidents
8
Years on record
1995–2002
Latest incident
May 2002
Inspection activity
MSHA inspections since 2001
5
inspections on record
21
inspection hours
n/a
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 21 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
NAUMANN'S EQUIP CO INC recorded 8.22 reportable injury cases per 100 full-time workers in 2002.
Injury rate, 2002
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
8.22
total case rate
8.22
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 4.17 and the all-US-mining average was 5.05 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 3.17 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2002 *
8.22
8.22
0.000
2001 *
0.00
0.00
0.000
2000 *
0.00
0.00
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2002
11
2001
11
2000
12
Source: MSHA quarterly employment and production, updated weekly.
NAUMANN'S EQUIP CO INC sits in Travis County, Texas, where the Census mining category is 0.4% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Travis County, Texas · Population 1,307,625
0.4%
Mining share of county employment
$97,169
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2002 Q4
5,185
0
0
0.0
2002 Q3
6,154
0
0
0.0
2002 Q2
6,829
0
0
0.0
2002 Q1
6,148
0
0
0.0
2001 Q4
5,773
0
0
0.0
2001 Q3
6,158
0
0
0.0
2001 Q2
6,723
0
0
0.0
2001 Q1
6,111
0
0
0.0
Show 4 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2000 Q4
5,858
0
0
0.0
2000 Q3
7,269
0
0
0.0
2000 Q2
6,959
0
0
0.0
2000 Q1
6,854
0
0
0.0
No fatalities recorded at this mine.
Reportable incidents
8 on file
2002 · 1 incident
May 21, 2002TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
February 7, 1997TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
WORKING ON TRUCK IN SHOP WHEN WRENCH SLIPPED AND HAND HIT FRAME RAIL.
February 6, 1996TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
WHILE CHANGING A FRONT LEAF SPRING ON A DUMP TRUCK EE PULLED A MSUCLE WHEN LIFTING SPRING OUT OF IT SOCKET. HE SAID HE FELT A PULL BUT NOTHING HURT. HE PUT NEW SPRING IN FINISHED JOB FELT TIME , WENT HOME THAT NIGHT HE BEGAN TO FEEL SOME PAIN IN GROIN AREA.
January 16, 1996TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techMACHINERY
WHILE BUILDING A SMALL WOOD FRAME OFFICE INSIDE OUR SHOP--USING AN AIR NAIL GUNN--EE MISSED NAILING BOARD AND SHOT NAIL INTO LEFT WRIST.
1995 · 1 incident
March 6, 1995TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSTEPPING OR KNEELING ON OBJECT
EE LEFT SHOP AREA TO DISCARD A USED PIECE OF IRON IN SCRAP IRON PILE & STEPPED ON BOARD THAT HAD INADVERTENTLY BEEN THROWN AWAY IN AN INCORRECT AREA. THE BOARD HAD A NAIL WHICH PUNCTURED HIS S OE INTO HIS FOOT.